diff options
Diffstat (limited to 'target/linux/coldfire/files-2.6.31/arch/m68k/include/asm/MCD_dma.h')
| -rw-r--r-- | target/linux/coldfire/files-2.6.31/arch/m68k/include/asm/MCD_dma.h | 432 |
1 files changed, 0 insertions, 432 deletions
diff --git a/target/linux/coldfire/files-2.6.31/arch/m68k/include/asm/MCD_dma.h b/target/linux/coldfire/files-2.6.31/arch/m68k/include/asm/MCD_dma.h deleted file mode 100644 index 700adf275..000000000 --- a/target/linux/coldfire/files-2.6.31/arch/m68k/include/asm/MCD_dma.h +++ /dev/null @@ -1,432 +0,0 @@ -/********************************************************************* - * - * Copyright (C) 2004 Motorola, Inc. - * MOTOROLA, INC. All Rights Reserved. - * Copyright 2009 Freescale Semiconductor, Inc. - * Shrek Wu b16972@freescale.com - * - * You are hereby granted a copyright license to use - * the SOFTWARE so long as this entire notice is - * retained without alteration in any modified and/or redistributed - * versions, and that such modified versions are clearly identified - * as such. No licenses are granted by implication, estoppel or - * otherwise under any patents or trademarks of Motorola, Inc. This - * software is provided on an "AS IS" basis and without warranty. - * - * To the maximum extent permitted by applicable law, MOTOROLA - * DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING - * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR - * PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH REGARD TO THE - * SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF) AND ANY - * ACCOMPANYING WRITTEN MATERIALS. - * - * To the maximum extent permitted by applicable law, IN NO EVENT - * SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING - * WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS - * INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY - * LOSS) ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. - * - * Motorola assumes no responsibility for the maintenance and support - * of this software - ********************************************************************/ - -/* - * File: MCD_dma.h - * Purpose: Main header file for multi-channel DMA API. - * - * Notes: - * - * Modifications: - */ -#ifndef _MCD_API_H -#define _MCD_API_H - -#include <asm/types.h> - -/* - * Turn Execution Unit tasks ON (#define) or OFF (#undef) - */ -#undef MCD_INCLUDE_EU - -/* - * Number of DMA channels - */ -#define NCHANNELS 16 - -/* - * Total number of variants - */ -#ifdef MCD_INCLUDE_EU -#define NUMOFVARIANTS 6 -#else -#define NUMOFVARIANTS 4 -#endif - -/* - * Define sizes of the various tables - */ -#define TASK_TABLE_SIZE (NCHANNELS*32) -#define VAR_TAB_SIZE (128) -#define CONTEXT_SAVE_SIZE (128) -#define FUNCDESC_TAB_SIZE (256) - -#ifdef MCD_INCLUDE_EU -#define FUNCDESC_TAB_NUM 16 -#else -#define FUNCDESC_TAB_NUM 1 -#endif - - -#ifndef DEFINESONLY - -/* - * Portability typedefs - */ - /* -#ifndef s32 -typedef int s32; -#endif -#ifndef u32 -typedef unsigned int u32; -#endif -#ifndef s16 -typedef short s16; -#endif -#ifndef u16 -typedef unsigned short u16; -#endif -#ifndef s8 -typedef char s8; -#endif -#ifndef u8 -typedef unsigned char u8; -#endif -*/ -/* - * These structures represent the internal registers of the - * multi-channel DMA - */ -struct dmaRegs_s { - u32 taskbar; /* task table base address register */ - u32 currPtr; - u32 endPtr; - u32 varTablePtr; - u16 dma_rsvd0; - u16 ptdControl; /* ptd control */ - u32 intPending; /* interrupt pending register */ - u32 intMask; /* interrupt mask register */ - u16 taskControl[16]; /* task control registers */ - u8 priority[32]; /* priority registers */ - u32 initiatorMux; /* initiator mux control */ - u32 taskSize0; /* task size control register 0. */ - u32 taskSize1; /* task size control register 1. */ - u32 dma_rsvd1; /* reserved */ - u32 dma_rsvd2; /* reserved */ - u32 debugComp1; /* debug comparator 1 */ - u32 debugComp2; /* debug comparator 2 */ - u32 debugControl; /* debug control */ - u32 debugStatus; /* debug status */ - u32 ptdDebug; /* priority task decode debug */ - u32 dma_rsvd3[31]; /* reserved */ -}; -typedef volatile struct dmaRegs_s dmaRegs; - -#endif - -/* - * PTD contrl reg bits - */ -#define PTD_CTL_TSK_PRI 0x8000 -#define PTD_CTL_COMM_PREFETCH 0x0001 - -/* - * Task Control reg bits and field masks - */ -#define TASK_CTL_EN 0x8000 -#define TASK_CTL_VALID 0x4000 -#define TASK_CTL_ALWAYS 0x2000 -#define TASK_CTL_INIT_MASK 0x1f00 -#define TASK_CTL_ASTRT 0x0080 -#define TASK_CTL_HIPRITSKEN 0x0040 -#define TASK_CTL_HLDINITNUM 0x0020 -#define TASK_CTL_ASTSKNUM_MASK 0x000f - -/* - * Priority reg bits and field masks - */ -#define PRIORITY_HLD 0x80 -#define PRIORITY_PRI_MASK 0x07 - -/* - * Debug Control reg bits and field masks - */ -#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000 -#define DBG_CTL_AUTO_ARM 0x00008000 -#define DBG_CTL_BREAK 0x00004000 -#define DBG_CTL_COMP1_TYP_MASK 0x00003800 -#define DBG_CTL_COMP2_TYP_MASK 0x00000070 -#define DBG_CTL_EXT_BREAK 0x00000004 -#define DBG_CTL_INT_BREAK 0x00000002 - -/* - * PTD Debug reg selector addresses - * This reg must be written with a value to show the contents of - * one of the desired internal register. - */ -#define PTD_DBG_REQ 0x00 /* shows the state of 31 initiators */ -#define PTD_DBG_TSK_VLD_INIT 0x01 /* shows which 16 tasks are valid and - have initiators asserted */ - - -/* - * General return values - */ -#define MCD_OK 0 -#define MCD_ERROR -1 -#define MCD_TABLE_UNALIGNED -2 -#define MCD_CHANNEL_INVALID -3 - -/* - * MCD_initDma input flags - */ -#define MCD_RELOC_TASKS 0x00000001 -#define MCD_NO_RELOC_TASKS 0x00000000 -#define MCD_COMM_PREFETCH_EN 0x00000002 -/* Commbus Prefetching - MCF547x/548x ONLY */ - -/* - * MCD_dmaStatus Status Values for each channel - */ -#define MCD_NO_DMA 1 /* No DMA has been requested since reset */ -#define MCD_IDLE 2 /* DMA active, but the initiator is currently inactive */ -#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */ -#define MCD_PAUSED 4 /* DMA active but it is currently paused */ -#define MCD_HALTED 5 -/* the most recent DMA has been killed with MCD_killTask() */ -#define MCD_DONE 6 /* the most recent DMA has completed. */ - - -/* - * MCD_startDma parameter defines - */ - -/* - * Constants for the funcDesc parameter - */ -/* Byte swapping: */ -#define MCD_NO_BYTE_SWAP 0x00045670 /* to disable byte swapping. */ -#define MCD_BYTE_REVERSE 0x00076540 -/* to reverse the bytes of each u32 of the DMAed data. */ -#define MCD_U16_REVERSE 0x00067450 /* to reverse the 16-bit halves of - each 32-bit data value being DMAed.*/ -#define MCD_U16_BYTE_REVERSE 0x00054760 /* to reverse the byte halves of each - 16-bit half of each 32-bit data value DMAed */ -#define MCD_NO_BIT_REV 0x00000000 -/* do not reverse the bits of each byte DMAed. */ -#define MCD_BIT_REV 0x00088880 /* reverse the bits of each byte DMAed */ -/* CRCing: */ -#define MCD_CRC16 0xc0100000 /* to perform CRC-16 on DMAed data. */ -#define MCD_CRCCCITT 0xc0200000 /* to perform CRC-CCITT on DMAed data. */ -#define MCD_CRC32 0xc0300000 /* to perform CRC-32 on DMAed data. */ -#define MCD_CSUMINET 0xc0400000 -/* to perform internet checksums on DMAed data.*/ -#define MCD_NO_CSUM 0xa0000000 /* to perform no checksumming. */ - -#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM) -#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM) - -/* - * Constants for the flags parameter - */ -#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */ -#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */ -#define MCD_TT_FLAGS_SP 0x00000004 -/* Speculative prefetch(XLB) MCF547x/548x ONLY */ -#define MCD_TT_FLAGS_MASK 0x000000ff -#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW) - -#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */ -#define MCD_CHAIN_DMA /* TBD */ -#define MCD_EU_DMA /* TBD */ -#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */ -#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */ - - -/* these flags are valid for MCD_startDma and the chained buffer descriptors */ -#define MCD_BUF_READY 0x80000000 -/* indicates that this buffer is now under the DMA's control */ -#define MCD_WRAP 0x20000000 -/* to tell the FEC Dmas to wrap to the first BD */ -#define MCD_INTERRUPT 0x10000000 -/* to generate an interrupt after completion of the DMA. */ -#define MCD_END_FRAME 0x08000000 -/* tell the DMA to end the frame when transferring - last byte of data in buffer */ -#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum - prior to performing the DMA. */ - -/* Defines for the FEC buffer descriptor control/status word*/ -#define MCD_FEC_BUF_READY 0x8000 -#define MCD_FEC_WRAP 0x2000 -#define MCD_FEC_INTERRUPT 0x1000 -#define MCD_FEC_END_FRAME 0x0800 - - -/* - * Defines for general intuitiveness - */ - -#define MCD_TRUE 1 -#define MCD_FALSE 0 - -/* - * Three different cases for destination and source. - */ -#define MINUS1 -1 -#define ZERO 0 -#define PLUS1 1 - -#ifndef DEFINESONLY - -/* Task Table Entry struct*/ -typedef struct { - u32 TDTstart; /* task descriptor table start */ - u32 TDTend; /* task descriptor table end */ - u32 varTab; /* variable table start */ - u32 FDTandFlags; /* function descriptor table start and flags */ - volatile u32 descAddrAndStatus; - volatile u32 modifiedVarTab; - u32 contextSaveSpace; /* context save space start */ - u32 literalBases; -} TaskTableEntry; - - -/* Chained buffer descriptor */ -typedef volatile struct MCD_bufDesc_struct MCD_bufDesc; -struct MCD_bufDesc_struct { - u32 flags; /* flags describing the DMA */ - u32 csumResult; - /* checksum from checksumming performed since last checksum reset */ - s8 *srcAddr; /* the address to move data from */ - s8 *destAddr; /* the address to move data to */ - s8 *lastDestAddr; /* the last address written to */ - u32 dmaSize; - /* the number of bytes to transfer independent of the transfer size */ - MCD_bufDesc *next; /* next buffer descriptor in chain */ - u32 info; - /* private information about this descriptor; DMA does not affect it */ -}; - -/* Progress Query struct */ -typedef volatile struct MCD_XferProg_struct { - s8 *lastSrcAddr; - /* the most-recent or last, post-increment source address */ - s8 *lastDestAddr; - /* the most-recent or last, post-increment destination address */ - u32 dmaSize; - /* the amount of data transferred for the current buffer */ - MCD_bufDesc *currBufDesc; - /* pointer to the current buffer descriptor being DMAed */ -} MCD_XferProg; - - -/* FEC buffer descriptor */ -typedef volatile struct MCD_bufDescFec_struct { - u16 statCtrl; - u16 length; - u32 dataPointer; -} MCD_bufDescFec; - - -/*************************************************************************/ -/* - * API function Prototypes - see MCD_dmaApi.c for further notes - */ - -/* - * MCD_startDma starts a particular kind of DMA . - */ -int MCD_startDma( - int channel, /* the channel on which to run the DMA */ - s8 *srcAddr, - /* the address to move data from, or buffer-descriptor address */ - s16 srcIncr, /* the amount to increment the source address per transfer */ - s8 *destAddr, /* the address to move data to */ - s16 destIncr, - /* the amount to increment the destination address per transfer */ - u32 dmaSize, - /* the number of bytes to transfer independent of the transfer size */ - u32 xferSize, /* the number bytes in of each data movement (1, 2, or 4) */ - u32 initiator, /* what device initiates the DMA */ - int priority, /* priority of the DMA */ - u32 flags, /* flags describing the DMA */ - u32 funcDesc -/* a description of byte swapping, bit swapping, and CRC actions */ -); - -/* - * MCD_initDma() initializes the DMA API by setting up a pointer to the DMA - * registers, relocating and creating the appropriate task structures, and - * setting up some global settings - */ -int MCD_initDma(dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags); - -/* - * MCD_dmaStatus() returns the status of the DMA on the requested channel. - */ -int MCD_dmaStatus(int channel); - -/* - * MCD_XferProgrQuery() returns progress of DMA on requested channel - */ -int MCD_XferProgrQuery(int channel, MCD_XferProg *progRep); - -/* - * MCD_killDma() halts the DMA on the requested channel, without any - * intention of resuming the DMA. - */ -int MCD_killDma(int channel); - -/* - * MCD_continDma() continues a DMA which as stopped due to encountering an - * unready buffer descriptor. - */ -int MCD_continDma(int channel); - -/* - * MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is - * running on that channel). - */ -int MCD_pauseDma(int channel); - -/* - * MCD_resumeDma() resumes the DMA on a given channel (if any DMA is - * running on that channel). - */ -int MCD_resumeDma(int channel); - -/* - * MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA - */ -int MCD_csumQuery(int channel, u32 *csum); - -/* - * MCD_getCodeSize provides the packed size required by the microcoded task - * and structures. - */ -int MCD_getCodeSize(void); - -/* - * MCD_getVersion provides a pointer to a version string and returns a - * version number. - */ -int MCD_getVersion(char **longVersion); - -/* macro for setting a location in the variable table */ -#define MCD_SET_VAR(taskTab, idx, value) ((u32 *)(taskTab)->varTab)[idx] = value - /* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function, - so I'm avoiding surrounding it with "do {} while(0)" */ - -#endif /* DEFINESONLY */ - -#endif /* _MCD_API_H */ |