diff options
| author | florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2013-03-14 14:45:56 +0000 |
|---|---|---|
| committer | florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73> | 2013-03-14 14:45:56 +0000 |
| commit | 05ea13b746e715f03c70e29068b650a62e5e5d79 (patch) | |
| tree | 08d6be7813310be182259388518215a17afcc18c /target/linux/generic/patches-3.9/726-phy_rtl8366.patch | |
| parent | 54d0b82f17bde2e67b8a2b58c1cb3e9ba294e9b7 (diff) | |
kernel: add support for 3.9-rc2
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36008 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/generic/patches-3.9/726-phy_rtl8366.patch')
| -rw-r--r-- | target/linux/generic/patches-3.9/726-phy_rtl8366.patch | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/target/linux/generic/patches-3.9/726-phy_rtl8366.patch b/target/linux/generic/patches-3.9/726-phy_rtl8366.patch new file mode 100644 index 000000000..c57dc18ae --- /dev/null +++ b/target/linux/generic/patches-3.9/726-phy_rtl8366.patch @@ -0,0 +1,45 @@ +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -214,6 +214,30 @@ config MDIO_BUS_MUX_MMIOREG + + Currently, only 8-bit registers are supported. + ++config RTL8366_SMI ++ tristate "Driver for the RTL8366 SMI interface" ++ depends on GENERIC_GPIO ++ ---help--- ++ This module implements the SMI interface protocol which is used ++ by some RTL8366 ethernet switch devices via the generic GPIO API. ++ ++if RTL8366_SMI ++ ++config RTL8366_SMI_DEBUG_FS ++ bool "RTL8366 SMI interface debugfs support" ++ depends on DEBUG_FS ++ default n ++ ++config RTL8366S_PHY ++ tristate "Driver for the Realtek RTL8366S switch" ++ select SWCONFIG ++ ++config RTL8366RB_PHY ++ tristate "Driver for the Realtek RTL8366RB switch" ++ select SWCONFIG ++ ++endif # RTL8366_SMI ++ + endif # PHYLIB + + config MICREL_KS8995MA +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -23,6 +23,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o + obj-$(CONFIG_REALTEK_PHY) += realtek.o + obj-$(CONFIG_AR8216_PHY) += ar8216.o + obj-$(CONFIG_RTL8306_PHY) += rtl8306.o ++obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o ++obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o ++obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o + obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o + obj-$(CONFIG_FIXED_PHY) += fixed.o + obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o |