[brcm63xx] drop support for 2.6.30 kernel

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20438 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 227 deletions

diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_livebox.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_livebox.c
deleted file mode 100644
index 06ca83b59..000000000
--- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_livebox.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <asm/addrspace.h>
-#include <bcm63xx_board.h>
-#include <bcm63xx_cpu.h>
-#include <bcm63xx_regs.h>
-#include <bcm63xx_io.h>
-#include <bcm63xx_board.h>
-#include <bcm63xx_dev_pci.h>
-#include <bcm63xx_dev_uart.h>
-#include <bcm63xx_dev_wdt.h>
-#include <bcm63xx_dev_enet.h>
-#include <bcm63xx_dev_pcmcia.h>
-#include <bcm63xx_dev_usb_ohci.h>
-#include <bcm63xx_dev_usb_ehci.h>
-#include <board_bcm963xx.h>
-
-#define PFX	"board_livebox: "
-
-static unsigned int mac_addr_used = 0;
-static struct board_info board;
-
-/*
- * known 6348 boards
- */
-#ifdef CONFIG_BCM63XX_CPU_6348
-static struct board_info __initdata board_livebox = {
-	.name				= "Livebox",
-	.expected_cpu_id		= 0x6348,
-
-	.has_enet0			= 1,
-	.has_enet1			= 1,
-	.has_pci			= 1,
-
-	.enet0 = {
-		.has_phy		= 1,
-		.use_internal_phy	= 1,
-	},
-
-	.enet1 = {
-		.force_speed_100	= 1,
-		.force_duplex_full	= 1,
-	},
-
-	.has_ohci0			= 1,
-	.has_pccard			= 1,
-	.has_ehci0			= 1,
-};
-#endif
-
-/*
- * all boards
- */
-static const struct board_info __initdata *bcm963xx_boards[] = {
-#ifdef CONFIG_BCM63XX_CPU_6348
-	&board_livebox
-#endif
-};
-
-/*
- * early init callback
- */
-void __init board_prom_init(void)
-{
-	u32 val;
-
-	/* read base address of boot chip select (0) */
-	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-	val &= MPI_CSBASE_BASE_MASK;
-
-	/* assume board is a Livebox */
-	memcpy(&board, bcm963xx_boards[0], sizeof(board));
-
-	/* setup pin multiplexing depending on board enabled device,
-	 * this has to be done this early since PCI init is done
-	 * inside arch_initcall */
-	val = 0;
-
-	if (board.has_pci) {
-		bcm63xx_pci_enabled = 1;
-		if (BCMCPU_IS_6348())
-			val |= GPIO_MODE_6348_G2_PCI;
-	}
-
-	if (board.has_pccard) {
-		if (BCMCPU_IS_6348())
-			val |= GPIO_MODE_6348_G1_MII_PCCARD;
-	}
-
-	if (board.has_enet0 && !board.enet0.use_internal_phy) {
-		if (BCMCPU_IS_6348())
-			val |= GPIO_MODE_6348_G3_EXT_MII |
-				GPIO_MODE_6348_G0_EXT_MII;
-	}
-
-	if (board.has_enet1 && !board.enet1.use_internal_phy) {
-		if (BCMCPU_IS_6348())
-			val |= GPIO_MODE_6348_G3_EXT_MII |
-				GPIO_MODE_6348_G0_EXT_MII;
-	}
-
-	bcm_gpio_writel(val, GPIO_MODE_REG);
-}
-
-/*
- * second stage init callback, good time to panic if we couldn't
- * identify on which board we're running since early printk is working
- */
-void __init board_setup(void)
-{
-	if (!board.name[0])
-		panic("unable to detect bcm963xx board");
-	printk(KERN_INFO PFX "board name: %s\n", board.name);
-
-	/* make sure we're running on expected cpu */
-	if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-		panic("unexpected CPU for bcm963xx board");
-}
-
-/*
- * return board name for /proc/cpuinfo
- */
-const char *board_get_name(void)
-{
-	return board.name;
-}
-
-/*
- * register & return a new board mac address
- */
-
-static int board_get_mac_address(u8 *mac)
-{
-	u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00};
-	u8 *p;
-	int count;
-
-	memcpy(mac, default_mac, ETH_ALEN);
-
-	p = mac + ETH_ALEN - 1;
-	count = mac_addr_used;
-
-	while (count--) {
-		do {
-			(*p)++;
-			if (*p != 0)
-				break;
-			p--;
-		} while (p != mac);
-	}
-
-	if (p == mac) {
-		printk(KERN_ERR PFX "unable to fetch mac address\n");
-		return -ENODEV;
-	}
-        mac_addr_used++;
-
-	return 0;
-}
-
-static struct resource mtd_resources[] = {
-	{
-		.start          = 0,    /* filled at runtime */
-		.end            = 0,    /* filled at runtime */
-		.flags          = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device mtd_dev = {
-	.name                   = "bcm963xx-flash",
-	.resource               = mtd_resources,
-	.num_resources          = ARRAY_SIZE(mtd_resources),
-};
-
-
-/*
- * third stage init callback, register all board devices.
- */
-int __init board_register_devices(void)
-{
-	u32 val;
-
-	bcm63xx_uart_register();
-	bcm63xx_wdt_register();
-
-	if (board.has_pccard)
-		bcm63xx_pcmcia_register();
-
-	if (board.has_enet0 &&
-	    !board_get_mac_address(board.enet0.mac_addr))
-		bcm63xx_enet_register(0, &board.enet0);
-
-	if (board.has_enet1 &&
-	    !board_get_mac_address(board.enet1.mac_addr))
-		bcm63xx_enet_register(1, &board.enet1);
-
-	if (board.has_ohci0)
-		bcm63xx_ohci_register();
-
-	if (board.has_ehci0)
-		bcm63xx_ehci_register();
-
-
-	/* read base address of boot chip select (0) */
-	val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-	val &= MPI_CSBASE_BASE_MASK;
-	mtd_resources[0].start = val;
-	mtd_resources[0].end = 0x1FFFFFFF;
-	
-	platform_device_register(&mtd_dev);
-
-	return 0;
-}
-