strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 293 deletions

diff --git a/target/linux/amazon-2.6/files/arch/mips/amazon/pci.c b/target/linux/amazon-2.6/files/arch/mips/amazon/pci.c
deleted file mode 100644
index ab305a983..000000000
--- a/target/linux/amazon-2.6/files/arch/mips/amazon/pci.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- *  Carsten Langgaard, carstenl@mips.com
- *  Copyright (C) 1999, 2000 MIPS Technologies, Inc.  All rights reserved.
- *  Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-
-/* FIXME: convert nasty volatile register derefs to readl/writel calls */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/paccess.h>
-#include <asm/amazon/irq.h>
-#include <asm/amazon/amazon.h>
-
-#define AMAZON_PCI_REG32( addr )		  (*(volatile u32 *)(addr))
-#ifndef AMAZON_PCI_MEM_BASE
-#define AMAZON_PCI_MEM_BASE    0xb2000000
-#endif
-#define AMAZON_PCI_MEM_SIZE    0x00400000
-#define AMAZON_PCI_IO_BASE     0xb2400000
-#define AMAZON_PCI_IO_SIZE     0x00002000
-
-#define AMAZON_PCI_CFG_BUSNUM_SHF 16
-#define AMAZON_PCI_CFG_DEVNUM_SHF 11
-#define AMAZON_PCI_CFG_FUNNUM_SHF 8
-
-#define PCI_ACCESS_READ  0
-#define PCI_ACCESS_WRITE 1
-
-static inline u32 amazon_r32(u32 addr)
-{
-	u32 *ptr = (u32 *) addr;
-	return __raw_readl(ptr);
-}
-
-static inline void amazon_w32(u32 addr, u32 val)
-{
-	u32 *ptr = (u32 *) addr;
-	__raw_writel(val, ptr);
-}
-
-
-static struct resource pci_io_resource = {
-	.name = "io pci IO space",
-#if 0
-	.start = AMAZON_PCI_IO_BASE,
-	.end = AMAZON_PCI_IO_BASE + AMAZON_PCI_IO_SIZE - 1,
-#endif
-	.start = 0,
-	.end = AMAZON_PCI_IO_SIZE - 1,
-	.flags = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-	.name = "ext pci memory space",
-	.start = AMAZON_PCI_MEM_BASE,
-	.end = AMAZON_PCI_MEM_BASE + AMAZON_PCI_MEM_SIZE - 1,
-	.flags = IORESOURCE_MEM
-};
-
-static inline u32 amazon_pci_swap(u32 val)
-{
-#ifdef CONFIG_AMAZON_PCI_HW_SWAP
-	return swab32(val);
-#else
-	return val;
-#endif
-}
-
-static int amazon_pci_config_access(unsigned char access_type,
-	struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data)
-{
-	unsigned long flags;
-	u32 pci_addr;
-	u32 val;
-	int ret;
-   
-	/* Amazon support slot from 0 to 15 */
-	/* devfn 0 & 0x20 is itself */
-	if ((bus != 0) || (devfn == 0) || (devfn == 0x20))
-		return 1;
-
-	pci_addr=AMAZON_PCI_CFG_BASE |
-		bus->number << AMAZON_PCI_CFG_BUSNUM_SHF |
-		devfn << AMAZON_PCI_CFG_FUNNUM_SHF |
-		(where & ~0x3);
-    
-	local_irq_save(flags);
-	if (access_type == PCI_ACCESS_WRITE) {
-		val = amazon_pci_swap(*data);
-		ret = put_dbe(val, (u32 *)pci_addr);
-	} else {
-		ret = get_dbe(val, (u32 *)pci_addr);
-		*data = amazon_pci_swap(val);
-	}
-
-	amazon_w32(PCI_MODE, amazon_r32(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)));
-	amazon_w32(STATUS_COMMAND_ADDR, amazon_r32(STATUS_COMMAND_ADDR));
-	amazon_w32(PCI_MODE, amazon_r32(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)));
-	local_irq_restore(flags);
-
-	return ret; 
-}
-
-
-static int amazon_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
-{
-	u32 data = 0;
-	int ret = PCIBIOS_SUCCESSFUL;
-
-	if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) {
-		data = ~0;
-		ret = -1;
-	}
-
-	switch (size) {
-		case 1:
-			*((u8 *) val) = (data >> ((where & 3) << 3)) & 0xff;
-			break;
-		case 2:
-			*((u16 *) val) = (data >> ((where & 3) << 3)) & 0xffff;
-			break;
-		case 4:
-			*val = data;
-			break;
-		default:
-			return -1;
-	}
-
-	return ret;
-}
-
-
-static int amazon_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
-{
-	if (size != 4) {
-		u32 data;
-
-		if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
-			return -1;
-
-		if (size == 1)
-			val = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
-		else if (size == 2)
-			val = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3));
-		else
-			return -1;
-	}
-
-	if (amazon_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
-	       return -1;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops amazon_pci_ops = {
-	amazon_pci_read,
-	amazon_pci_write
-};
-
-static struct pci_controller amazon_pci_controller = {
-	.pci_ops = &amazon_pci_ops,
-	.mem_resource = &pci_mem_resource,
-	.io_resource = &pci_io_resource
-};
-
-int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	switch (slot) {
-		case 13:
-			/* IDSEL = AD29 --> USB Host Controller */
-			return INT_NUM_IM2_IRL15;
-		case 14:
-			/* IDSEL = AD30 --> mini PCI connector */
-			return INT_NUM_IM2_IRL14;
-		default:
-			printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
-			return 0;
-	}
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	switch(dev->irq) {
-		case INT_NUM_IM2_IRL15:
-			/* 
-			 * IDSEL = AD29 --> USB Host Controller
-			 * PCI_INTA/B/C--GPIO Port0.2--EXIN3
-			 * IN/ALT0:1 ALT1:0
-			 * PULL UP
-			 */
-			(*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffb;
-			(*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 4;
-			(*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffb;
-			(*AMAZON_GPIO_P0_PUDSEL) =  (*AMAZON_GPIO_P0_PUDSEL) | 4;
-			(*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 4;
-			//External Interrupt Node
-			(*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x6000; /* Low Level triggered */
-			(*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x8;
-			pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-			break;
-		case INT_NUM_IM2_IRL14:
-			/* 
-			 * IDSEL = AD30 --> mini PCI connector 
-			 * PCI_INTA--GPIO Port0.1--EXIN2
-			 * IN/ALT0:1 ALT1:0
-			 * PULL UP
-			 */
-			(*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffd;
-			(*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 2;
-			(*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffd;
-			(*AMAZON_GPIO_P0_PUDSEL) =  (*AMAZON_GPIO_P0_PUDSEL) | 2;
-			(*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 2;
-			//External Interrupt Node
-			(*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x600;
-			(*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x4;
-			pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-			break;
-		default:
-			return 1;
-	}
-	return 0;
-}
-
-int amazon_pci_init(void)
-{
-	u32 temp_buffer;
-
-#ifdef CONFIG_AMAZON_PCI_HW_SWAP
-	AMAZON_PCI_REG32(IRM) = AMAZON_PCI_REG32(IRM) | (1<<27) | (1<<28);
-	wmb();
-#endif
-
-	AMAZON_PCI_REG32(CLOCK_CONTROL) = AMAZON_PCI_REG32(CLOCK_CONTROL) | (1<<ARB_CTRL_bit);
-	amazon_w32(PCI_MODE, amazon_r32(PCI_MODE) & (~(1<<PCI_MODE_cfgok_bit)));
-
-	AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) = AMAZON_PCI_REG32(STATUS_COMMAND_ADDR) | (1<<BUS_MASTER_ENABLE_BIT) |(1<<MEM_SPACE_ENABLE_BIT);
-
-	temp_buffer = AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR);
-	temp_buffer = temp_buffer | (1<< INTERNAL_ARB_ENABLE_BIT);
-	temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_REQ_MASK_2BITS);
-	temp_buffer = temp_buffer & ~(3<< PCI_MASTER0_GNT_MASK_2BITS);
-
-	/* flash */
-	temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_REQ_MASK_2BITS);
-	temp_buffer = temp_buffer & ~(3<< PCI_MASTER1_GNT_MASK_2BITS);
-
-	/* external master */
-	temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_REQ_MASK_2BITS);
-	temp_buffer = temp_buffer & ~(3<< PCI_MASTER2_GNT_MASK_2BITS);
-
-	AMAZON_PCI_REG32(PCI_ARB_CTRL_STATUS_ADDR) = temp_buffer;
-	wmb();
-
-	AMAZON_PCI_REG32(FPI_ADDRESS_MAP_0) = 0xb2000000;
-	AMAZON_PCI_REG32(FPI_ADDRESS_MAP_1) = 0xb2100000;
-	AMAZON_PCI_REG32(FPI_ADDRESS_MAP_2) = 0xb2200000;
-	AMAZON_PCI_REG32(FPI_ADDRESS_MAP_3) = 0xb2300000;
-	AMAZON_PCI_REG32(FPI_ADDRESS_MAP_4) = 0xb2400000;
-	AMAZON_PCI_REG32(FPI_ADDRESS_MAP_5) = 0xb2500000;
-	AMAZON_PCI_REG32(FPI_ADDRESS_MAP_6) = 0xb2600000;
-	AMAZON_PCI_REG32(FPI_ADDRESS_MAP_7) = 0xb2700000;
-	   
-	AMAZON_PCI_REG32(BAR11_MASK) = 0x0f000008;
-	AMAZON_PCI_REG32(PCI_ADDRESS_MAP_11) = 0x0;
-	AMAZON_PCI_REG32(BAR1_ADDR) = 0x0;
-	amazon_w32(PCI_MODE, amazon_r32(PCI_MODE) | (~(1<<PCI_MODE_cfgok_bit)));
-	//use 8 dw burse length
-	AMAZON_PCI_REG32(FPI_BURST_LENGTH) = 0x303;
-
-	set_io_port_base(ioremap(AMAZON_PCI_IO_BASE, AMAZON_PCI_IO_SIZE));
-	register_pci_controller(&amazon_pci_controller);
-	return 0;
-}
-arch_initcall(amazon_pci_init);