[adm5120] experimental support for 2.6.27

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12863 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 0 insertions, 64 deletions

diff --git a/target/linux/adm5120/files-2.6.26/include/asm-mips/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files-2.6.26/include/asm-mips/mach-adm5120/adm5120_uart.h
deleted file mode 100644
index 6308f6bd1..000000000
--- a/target/linux/adm5120/files-2.6.26/include/asm-mips/mach-adm5120/adm5120_uart.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- *  ADM5120 UART definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in UARTs.
- *
- *  Copyright (C) 2007 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MACH_ADM5120_UART_H
-#define _MACH_ADM5120_UART_H
-
-#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
-
-#define UART_REG_DATA	0x00
-#define UART_REG_RSR	0x04
-#define UART_REG_ECR	UART_REG_RSR
-#define UART_REG_LCRH	0x08
-#define UART_REG_LCRM	0x0C
-#define UART_REG_LCRL	0x10
-#define UART_REG_CTRL	0x14
-#define UART_REG_FLAG	0x18
-
-/* Receive Status Register bits */
-#define UART_RSR_FE	( 1 << 0 )
-#define UART_RSR_PE	( 1 << 1 )
-#define UART_RSR_BE	( 1 << 2 )
-#define UART_RSR_OE	( 1 << 3 )
-#define UART_RSR_ERR	( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE )
-
-#define UART_ECR_ALL	0xFF
-
-/* Line Control High register bits */
-#define UART_LCRH_BRK	( 1 << 0 ) /* send break */
-#define UART_LCRH_PEN	( 1 << 1 ) /* parity enable */
-#define UART_LCRH_EPS	( 1 << 2 ) /* even parity select */
-#define UART_LCRH_STP1	( 0 << 3 ) /* one stop bits select */
-#define UART_LCRH_STP2	( 1 << 3 ) /* two stop bits select */
-#define UART_LCRH_FEN	( 1 << 4 ) /* FIFO enable */
-
-#define UART_LCRH_WLEN5	( 0 << 5 )
-#define UART_LCRH_WLEN6	( 1 << 5 )
-#define UART_LCRH_WLEN7	( 2 << 5 )
-#define UART_LCRH_WLEN8	( 3 << 5 )
-
-/* Control register bits */
-#define UART_CTRL_EN	( 1 << 0 )
-
-/* Flag register bits */
-#define UART_FLAG_CTS	( 1 << 0 )
-#define UART_FLAG_DSR	( 1 << 1 )
-#define UART_FLAG_DCD	( 1 << 2 )
-#define UART_FLAG_BUSY	( 1 << 3 )
-#define UART_FLAG_RXFE	( 1 << 4 )
-#define UART_FLAG_TXFF	( 1 << 5 )
-#define UART_FLAG_RXFF	( 1 << 6 )
-#define UART_FLAG_TXFE	( 1 << 7 )
-
-#endif /* _MACH_ADM5120_UART_H */