From 4d29beaf0f856d215e951c05f3b66ba8f1130802 Mon Sep 17 00:00:00 2001 From: claudio Date: Sun, 20 Mar 2011 22:49:27 +0000 Subject: [at91] Update to 2.6.38 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26246 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/at91/patches/800-netus-support.patch | 68 ----------------------- 1 file changed, 68 deletions(-) delete mode 100755 target/linux/at91/patches/800-netus-support.patch (limited to 'target/linux/at91/patches/800-netus-support.patch') diff --git a/target/linux/at91/patches/800-netus-support.patch b/target/linux/at91/patches/800-netus-support.patch deleted file mode 100755 index ad3301762..000000000 --- a/target/linux/at91/patches/800-netus-support.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- a/arch/arm/mach-at91/Kconfig -+++ b/arch/arm/mach-at91/Kconfig -@@ -354,6 +354,13 @@ config MACH_CPU9G20 - Select this if you are using a Eukrea Electromatique's - CPU9G20 Board - -+config MACH_NETUS_FOXBOARD -+ bool "Acmesystems NetusG20 board" -+ depends on ARCH_AT91SAM9G20 -+ help -+ Select this if you are using a Acmesystems NetusG20 -+ board -+ - endif - - # ---------------------------------------------------------- -@@ -444,6 +451,40 @@ - On AT91SAM926x boards both types of NAND flash can be present - (8 and 16 bit data bus width). - -+config NETUS_HEARTBEAT_LED -+ bool "Use heartbeat trigger for led" -+ depends on MACH_NETUS_FOXBOARD -+ select LEDS_TRIGGER_HEARTBEAT -+ help -+ Select this option to enable default trigger heartbeart for -+ FoxBoardG20 user led. -+ -+config NETUS_SERIALS -+ bool "Enable serials" -+ depends on MACH_NETUS_FOXBOARD -+ help -+ Select this option to enable serials interface /dev/ttyS1, -+ /dev/ttyS2 and /dev/ttyS5 (for oLed interface) -+ -+config NETUS_USE_DATAFLASH -+ bool "Enable the dataflash" -+ select MTD_DATAFLASH -+ select MTD_PARTITIONS -+ select MTD_CMDLINE_PARTS -+ select MTD_CHAR -+ select MTD_BLOCK -+ depends on MACH_NETUS_FOXBOARD -+ help -+ Select this option to use the dataflash. -+ -+config NETUS_FOXGM -+ bool "Enable support for FoxGM board" -+ depends on MACH_NETUS_FOXBOARD -+ select LEDS_TRIGGER_HEARTBEAT -+ help -+ Select this option to auto-configure leds and -+ serial ports according to FOXGM board. -+ - # ---------------------------------------------------------- - - comment "AT91 Feature Selections" ---- linux-2.6.35.4.orig/arch/arm/mach-at91/Makefile 2010-09-18 13:29:33.000000000 +0200 -+++ linux-2.6.35.4/arch/arm/mach-at91/Makefile 2010-09-18 13:31:31.000000000 +0200 -@@ -65,6 +65,7 @@ - obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o - obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o - obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o -+obj-$(CONFIG_MACH_NETUS_FOXBOARD) += board-netus-foxboard.o - - # AT91SAM9G45 board-specific support - obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o - -- cgit v1.2.3