diff options
Diffstat (limited to 'target')
42 files changed, 0 insertions, 6845 deletions
diff --git a/target/linux/rb532/config-2.6.24 b/target/linux/rb532/config-2.6.24 deleted file mode 100644 index 4314051ba..000000000 --- a/target/linux/rb532/config-2.6.24 +++ /dev/null @@ -1,258 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_8139TOO is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -# CONFIG_ATM is not set -# CONFIG_AX25 is not set -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BITREVERSE=y -CONFIG_BLK_DEV_CF_MIPS=y -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_BT is not set -CONFIG_CEVT_R4K=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CSRC_R4K=y -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DETECT_SOFTLOCKUP is not set -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EXT2_FS=y -# CONFIG_FAULT_INJECTION is not set -CONFIG_FORCED_INLINING=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HID is not set -CONFIG_HID_SUPPORT=y -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -CONFIG_INPUT_KEYBOARD=y -CONFIG_IRQ_CPU=y -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_KEXEC=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -CONFIG_KORINA=y -CONFIG_LEDS_RB500=y -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MIKROTIK_RB500=y -# CONFIG_MINI_FO is not set -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=4 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MIPS_UNCACHED is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_ALAUDA is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_BLOCK2MTD=y -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_NET_SCH_ESFQ_NFCT is not set -# CONFIG_NET_VENDOR_3COM is not set -CONFIG_NF_CONNTRACK=y -# CONFIG_NO_IOPORT is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -CONFIG_PCI=y -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_DOMAINS=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PROVE_LOCKING is not set -CONFIG_RC32434_WDT=y -# CONFIG_RCU_TORTURE_TEST is not set -# CONFIG_RTC is not set -CONFIG_RTC_LIB=y -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_RUNTIME_DEBUG is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_SCHED_DEBUG is not set -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_WAIT_SCAN is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SLABINFO=y -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SOUND is not set -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_SSB_POSSIBLE=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_TC35815 is not set -# CONFIG_TICK_ONESHOT is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_USB is not set -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USER_NS is not set -# CONFIG_VGASTATE is not set -CONFIG_VIA_RHINE=y -# CONFIG_VIA_RHINE_MMIO is not set -CONFIG_VIA_RHINE_NAPI=y -# CONFIG_YAFFS_9BYTE_TAGS is not set -CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y -CONFIG_YAFFS_AUTO_YAFFS2=y -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0 -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -CONFIG_YAFFS_DOES_ECC=y -CONFIG_YAFFS_ECC_WRONG_ORDER=y -CONFIG_YAFFS_FS=y -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_YAFFS_YAFFS1=y -CONFIG_YAFFS_YAFFS2=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/rb532/files-2.6.24/arch/mips/pci/fixup-rb500.c b/target/linux/rb532/files-2.6.24/arch/mips/pci/fixup-rb500.c deleted file mode 100644 index 76c465fea..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/pci/fixup-rb500.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2001 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * stevel@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/pci.h> -#include <asm/io.h> - -#include <asm/rc32434/rc32434.h> - -static int __devinitdata irq_map[2][12] = { - { 0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1 }, - { 0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3 } -}; - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq = 0; - - if (dev->bus->number < 2 && PCI_SLOT(dev->devfn) < 12) { - irq = irq_map[dev->bus->number][PCI_SLOT(dev->devfn)]; - } - return irq + GROUP4_IRQ_BASE + 4; -} - diff --git a/target/linux/rb532/files-2.6.24/arch/mips/pci/ops-rc32434.c b/target/linux/rb532/files-2.6.24/arch/mips/pci/ops-rc32434.c deleted file mode 100644 index b90ab1d12..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/pci/ops-rc32434.c +++ /dev/null @@ -1,218 +0,0 @@ -/************************************************************************** - * - * BRIEF MODULE DESCRIPTION - * pci_ops for IDT EB434 board - * - * Copyright 2004 IDT Inc. (rischelp@idt.com) - * Copyright 2006 Felix Fietkau <nbd@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - ************************************************************************** - * May 2004 rkt, neb - * - * Initial Release - * - * - * - ************************************************************************** - */ - -#include <linux/autoconf.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/types.h> -#include <linux/delay.h> - -#include <asm/cpu.h> -#include <asm/io.h> - -#include <asm/rc32434/rc32434.h> -#include <asm/rc32434/pci.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - - -#define PCI_CFG_SET(bus,slot,func,off) \ - (rc32434_pci->pcicfga = (0x80000000 | \ - ((bus) << 16) | ((slot)<<11) | \ - ((func)<<8) | (off))) - -static inline int config_access(unsigned char access_type, struct pci_bus *bus, - unsigned int devfn, unsigned char where, - u32 * data) -{ - unsigned int slot = PCI_SLOT(devfn); - u8 func = PCI_FUNC(devfn); - - /* Setup address */ - PCI_CFG_SET(bus->number, slot, func, where); - rc32434_sync(); - - if (access_type == PCI_ACCESS_WRITE) - rc32434_pci->pcicfgd = *data; - else - *data = rc32434_pci->pcicfgd; - - rc32434_sync(); - - return 0; -} - - -/* - * We can't address 8 and 16 bit words directly. Instead we have to - * read/write a 32bit word and mask/modify the data we actually want. - */ -static int read_config_byte(struct pci_bus *bus, unsigned int devfn, - int where, u8 * val) -{ - u32 data; - int ret; - - ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); - *val = (data >> ((where & 3) << 3)) & 0xff; - return ret; -} - -static int read_config_word(struct pci_bus *bus, unsigned int devfn, - int where, u16 * val) -{ - u32 data; - int ret; - - ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); - *val = (data >> ((where & 3) << 3)) & 0xffff; - return ret; -} - -static int read_config_dword(struct pci_bus *bus, unsigned int devfn, - int where, u32 * val) -{ - int ret; - int delay = 1; - - if (bus->number == 0 && PCI_SLOT(devfn) > 21) - return 0; - -retry: - ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val); - - /* PCI scan: check for invalid values, device may not have - * finished initializing */ - - if (where == PCI_VENDOR_ID) { - if (ret == 0xffffffff || ret == 0x00000000 || - ret == 0x0000ffff || ret == 0xffff0000) { - - if (delay > 4) - return 0; - - delay *= 2; - msleep(delay); - goto retry; - } - } - - return ret; -} - -static int -write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, - u8 val) -{ - u32 data = 0; - - if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return -1; - - data = (data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - - -static int -write_config_word(struct pci_bus *bus, unsigned int devfn, int where, - u16 val) -{ - u32 data = 0; - - if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return -1; - - data = (data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - - if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) - return -1; - - - return PCIBIOS_SUCCESSFUL; -} - - -static int -write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, - u32 val) -{ - if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -static int pci_config_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) -{ - switch (size) { - case 1: - return read_config_byte(bus, devfn, where, (u8 *) val); - case 2: - return read_config_word(bus, devfn, where, (u16 *) val); - default: - return read_config_dword(bus, devfn, where, val); - } -} - -static int pci_config_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - switch (size) { - case 1: - return write_config_byte(bus, devfn, where, (u8) val); - case 2: - return write_config_word(bus, devfn, where, (u16) val); - default: - return write_config_dword(bus, devfn, where, val); - } -} - -struct pci_ops rc32434_pci_ops = { - .read = pci_config_read, - .write = pci_config_write, -}; diff --git a/target/linux/rb532/files-2.6.24/arch/mips/pci/pci-rc32434.c b/target/linux/rb532/files-2.6.24/arch/mips/pci/pci-rc32434.c deleted file mode 100644 index 9ae596c22..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/pci/pci-rc32434.c +++ /dev/null @@ -1,236 +0,0 @@ -/************************************************************************** - * - * BRIEF MODULE DESCRIPTION - * PCI initialization for IDT EB434 board - * - * Copyright 2004 IDT Inc. (rischelp@idt.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - ************************************************************************** - * May 2004 rkt, neb - * - * Initial Release - * - * - * - ************************************************************************** - */ - -#include <linux/autoconf.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/rc32434/rc32434.h> -#include <asm/rc32434/pci.h> - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -/* define an unsigned array for the PCI registers */ -unsigned int korinaCnfgRegs[25] = { - KORINA_CNFG1, KORINA_CNFG2, KORINA_CNFG3, KORINA_CNFG4, - KORINA_CNFG5, KORINA_CNFG6, KORINA_CNFG7, KORINA_CNFG8, - KORINA_CNFG9, KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12, - KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16, - KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20, - KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24 -}; -static struct resource rc32434_res_pci_mem1; -static struct resource rc32434_res_pci_mem2; - -static struct resource rc32434_res_pci_mem1 = { - .name = "PCI MEM1", - .start = 0x50000000, - .end = 0x5FFFFFFF, - .flags = IORESOURCE_MEM, - .parent = &rc32434_res_pci_mem1, - .sibling = NULL, - .child = &rc32434_res_pci_mem2 -}; - -static struct resource rc32434_res_pci_mem2 = { - .name = "PCI Mem2", - .start = 0x60000000, - .end = 0x6FFFFFFF, - .flags = IORESOURCE_MEM, - .parent = &rc32434_res_pci_mem1, - .sibling = NULL, - .child = NULL -}; - -static struct resource rc32434_res_pci_io1 = { - .name = "PCI I/O1", - .start = 0x18800000, - .end = 0x188FFFFF, - .flags = IORESOURCE_IO, -}; - -extern struct pci_ops rc32434_pci_ops; - -#define PCI_MEM1_START PCI_ADDR_START -#define PCI_MEM1_END PCI_ADDR_START + CPUTOPCI_MEM_WIN - 1 -#define PCI_MEM2_START PCI_ADDR_START + CPUTOPCI_MEM_WIN -#define PCI_MEM2_END PCI_ADDR_START + ( 2* CPUTOPCI_MEM_WIN) - 1 -#define PCI_IO1_START PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) -#define PCI_IO1_END PCI_ADDR_START + (2* CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN -1 -#define PCI_IO2_START PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN -#define PCI_IO2_END PCI_ADDR_START + (2* CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) -1 - - -struct pci_controller rc32434_controller2; - -struct pci_controller rc32434_controller = { - .pci_ops = &rc32434_pci_ops, - .mem_resource = &rc32434_res_pci_mem1, - .io_resource = &rc32434_res_pci_io1, - .mem_offset = 0, - .io_offset = 0, - -}; - -#ifdef __MIPSEB__ -#define PCI_ENDIAN_FLAG PCILBAC_sb_m -#else -#define PCI_ENDIAN_FLAG 0 -#endif - -static int __init rc32434_pcibridge_init(void) -{ - unsigned int pcicValue, pcicData = 0; - unsigned int dummyRead, pciCntlVal; - int loopCount; - unsigned int pciConfigAddr; - - pcicValue = rc32434_pci->pcic; - pcicValue = (pcicValue >> PCIM_SHFT) & PCIM_BIT_LEN; - if (!((pcicValue == PCIM_H_EA) || - (pcicValue == PCIM_H_IA_FIX) || - (pcicValue == PCIM_H_IA_RR))) { - printk("PCI init error!!!\n"); - /* Not in Host Mode, return ERROR */ - return -1; - } - /* Enables the Idle Grant mode, Arbiter Parking */ - pcicData |=(PCIC_igm_m|PCIC_eap_m|PCIC_en_m); - rc32434_pci->pcic = pcicData; /* Enable the PCI bus Interface */ - /* Zero out the PCI status & PCI Status Mask */ - for(;;) - { - pcicData = rc32434_pci->pcis; - if (!(pcicData & PCIS_rip_m)) - break; - } - - rc32434_pci->pcis = 0; - rc32434_pci->pcism = 0xFFFFFFFF; - /* Zero out the PCI decoupled registers */ - rc32434_pci->pcidac=0; /* disable PCI decoupled accesses at initialization */ - rc32434_pci->pcidas=0; /* clear the status */ - rc32434_pci->pcidasm=0x0000007F; /* Mask all the interrupts */ - /* Mask PCI Messaging Interrupts */ - rc32434_pci_msg->pciiic = 0; - rc32434_pci_msg->pciiim = 0xFFFFFFFF; - rc32434_pci_msg->pciioic = 0; - rc32434_pci_msg->pciioim = 0; - - - /* Setup PCILB0 as Memory Window */ - rc32434_pci->pcilba[0].a = (unsigned int) (PCI_ADDR_START); - - /* setup the PCI map address as same as the local address */ - - rc32434_pci->pcilba[0].m = (unsigned int) (PCI_ADDR_START); - - - /* Setup PCILBA1 as MEM */ - rc32434_pci->pcilba[0].c = ( ((SIZE_256MB & 0x1f) << PCILBAC_size_b) | PCI_ENDIAN_FLAG); - dummyRead = rc32434_pci->pcilba[0].c; /* flush the CPU write Buffers */ - rc32434_pci->pcilba[1].a = 0x60000000; - rc32434_pci->pcilba[1].m = 0x60000000; - - /* setup PCILBA2 as IO Window*/ - rc32434_pci->pcilba[1].c = (((SIZE_256MB & 0x1f) << PCILBAC_size_b )| PCI_ENDIAN_FLAG); - dummyRead = rc32434_pci->pcilba[1].c; /* flush the CPU write Buffers */ - rc32434_pci->pcilba[2].a = 0x18C00000; - rc32434_pci->pcilba[2].m = 0x18FFFFFF; - - /* setup PCILBA2 as IO Window*/ - rc32434_pci->pcilba[2].c = (((SIZE_4MB & 0x1f) << PCILBAC_size_b) | PCI_ENDIAN_FLAG ); - dummyRead = rc32434_pci->pcilba[2].c; /* flush the CPU write Buffers */ - - /* Setup PCILBA3 as IO Window */ - rc32434_pci->pcilba[3].a = 0x18800000; - rc32434_pci->pcilba[3].m = 0x18800000; - rc32434_pci->pcilba[3].c = ( (((SIZE_1MB & 0x1ff) << PCILBAC_size_b) | PCILBAC_msi_m) | PCI_ENDIAN_FLAG); - dummyRead = rc32434_pci->pcilba[3].c; /* flush the CPU write Buffers */ - - pciConfigAddr=(unsigned int)(0x80000004); - for(loopCount=0;loopCount<24;loopCount++){ - rc32434_pci->pcicfga=pciConfigAddr; - dummyRead=rc32434_pci->pcicfga; - rc32434_pci->pcicfgd = korinaCnfgRegs[loopCount]; - dummyRead=rc32434_pci->pcicfgd; - pciConfigAddr += 4; - } - rc32434_pci->pcitc = (unsigned int)((PCITC_RTIMER_VAL&0xff) << PCITC_rtimer_b) - | ((PCITC_DTIMER_VAL&0xff) << PCITC_dtimer_b); - - pciCntlVal=rc32434_pci->pcic; - pciCntlVal &=~(PCIC_tnr_m); - rc32434_pci->pcic = pciCntlVal; - pciCntlVal=rc32434_pci->pcic; - return 0; -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) { - /* disable prefetched memory range */ - pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0); - pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10); - - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4); - } - return 0; -} - -static int __init rc32434_pci_init(void) -{ - printk("PCI: Initializing PCI\n"); - - ioport_resource.start = rc32434_res_pci_io1.start; - ioport_resource.end = rc32434_res_pci_io1.end; - - rc32434_pcibridge_init(); - - register_pci_controller(&rc32434_controller); - rc32434_sync(); - - return 0; -} - -arch_initcall(rc32434_pci_init); - diff --git a/target/linux/rb532/files-2.6.24/arch/mips/rb500/Makefile b/target/linux/rb532/files-2.6.24/arch/mips/rb500/Makefile deleted file mode 100644 index d3ae3d912..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/rb500/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the RB500 board specific parts of the kernel -# - -obj-y += irq.o time.o setup.o serial.o prom.o gpio.o devices.o diff --git a/target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c b/target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c deleted file mode 100644 index 6372737de..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/rb500/devices.c +++ /dev/null @@ -1,338 +0,0 @@ -/* - * RouterBoard 500 Platform devices - * - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/ctype.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> - -#include <asm/bootinfo.h> - -#include <asm/rc32434/rc32434.h> -#include <asm/rc32434/dma.h> -#include <asm/rc32434/dma_v.h> -#include <asm/rc32434/eth.h> -#include <asm/rc32434/rb.h> - -#define ETH0_DMA_RX_IRQ GROUP1_IRQ_BASE + 0 -#define ETH0_DMA_TX_IRQ GROUP1_IRQ_BASE + 1 -#define ETH0_RX_OVR_IRQ GROUP3_IRQ_BASE + 9 -#define ETH0_TX_UND_IRQ GROUP3_IRQ_BASE + 10 - -#define ETH0_RX_DMA_ADDR (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET) -#define ETH0_TX_DMA_ADDR (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET) - -/* NAND definitions */ -#define MEM32(x) *((volatile unsigned *) (x)) - -#define GPIO_RDY (1 << 0x08) -#define GPIO_WPX (1 << 0x09) -#define GPIO_ALE (1 << 0x0a) -#define GPIO_CLE (1 << 0x0b) - -extern char* board_type; - -static struct resource korina_dev0_res[] = { - { - .name = "korina_regs", - .start = ETH0_PhysicalAddress, - .end = ETH0_PhysicalAddress + sizeof(ETH_t), - .flags = IORESOURCE_MEM, - }, { - .name = "korina_rx", - .start = ETH0_DMA_RX_IRQ, - .end = ETH0_DMA_RX_IRQ, - .flags = IORESOURCE_IRQ - }, { - .name = "korina_tx", - .start = ETH0_DMA_TX_IRQ, - .end = ETH0_DMA_TX_IRQ, - .flags = IORESOURCE_IRQ - }, { - .name = "korina_ovr", - .start = ETH0_RX_OVR_IRQ, - .end = ETH0_RX_OVR_IRQ, - .flags = IORESOURCE_IRQ - }, { - .name = "korina_und", - .start = ETH0_TX_UND_IRQ, - .end = ETH0_TX_UND_IRQ, - .flags = IORESOURCE_IRQ - }, { - .name = "korina_dma_rx", - .start = ETH0_RX_DMA_ADDR, - .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1, - .flags = IORESOURCE_MEM, - }, { - .name = "korina_dma_tx", - .start = ETH0_TX_DMA_ADDR, - .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct korina_device korina_dev0_data = { - .name = "korina0", - .mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee} -}; - -static struct platform_device korina_dev0 = { - .id = 0, - .name = "korina", - .dev.platform_data = &korina_dev0_data, - .resource = korina_dev0_res, - .num_resources = ARRAY_SIZE(korina_dev0_res), -}; - -#define CF_GPIO_NUM 13 - -static struct resource cf_slot0_res[] = { - { - .name = "cf_membase", - .flags = IORESOURCE_MEM - }, { - .name = "cf_irq", - .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */ - .end = (8 + 4 * 32 + CF_GPIO_NUM), - .flags = IORESOURCE_IRQ - } -}; - -static struct cf_device cf_slot0_data = { - .gpio_pin = 13 -}; - -static struct platform_device cf_slot0 = { - .id = 0, - .name = "rb500-cf", - .dev.platform_data = &cf_slot0_data, - .resource = cf_slot0_res, - .num_resources = ARRAY_SIZE(cf_slot0_res), -}; - -/* Resources and device for NAND. There is no data needed and no irqs, so just define the memory used. */ - -/* - * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader - * will not be able to find the kernel that we load. So set the oobinfo - * when creating the partitions - */ -static struct nand_ecclayout rb500_nand_ecclayout = { - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } } -}; - -int rb500_dev_ready(struct mtd_info *mtd) -{ - return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY; -} - -void rb500_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - unsigned char orbits, nandbits; - - if (ctrl & NAND_CTRL_CHANGE) { - - orbits = (ctrl & NAND_CLE) << 1; - orbits |= (ctrl & NAND_ALE) >> 1; - - nandbits = (~ctrl & NAND_CLE) << 1; - nandbits |= (~ctrl & NAND_ALE) >> 1; - - changeLatchU5(orbits, nandbits); - } - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W); -} - -static struct resource nand_slot0_res[] = { - [0] = { - .name = "nand_membase", - .flags = IORESOURCE_MEM - } -}; - -struct platform_nand_data rb500_nand_data = { - .ctrl.dev_ready = rb500_dev_ready, - .ctrl.cmd_ctrl = rb500_cmd_ctrl, -}; - -static struct platform_device nand_slot0 = { - .name = "gen_nand", - .id = -1, - .resource = nand_slot0_res, - .num_resources = ARRAY_SIZE(nand_slot0_res), - .dev.platform_data = &rb500_nand_data, -}; - -static struct mtd_partition rb500_partition_info[] = { - { - .name = "Routerboard NAND boot", - .offset = 0, - .size = 4 * 1024 * 1024, - }, { - .name = "rootfs", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device rb500_led = { - .name = "rb500-led", - .id = 0, -}; - -static struct gpio_keys_button rb500_gpio_btn[] = { - { - .gpio = 1, - .code = BTN_0, - .desc = "S1", - .active_low = 1, - } -}; - -static struct gpio_keys_platform_data rb500_gpio_btn_data = { - .buttons = rb500_gpio_btn, - .nbuttons = ARRAY_SIZE(rb500_gpio_btn), -}; - -static struct platform_device rb500_button = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &rb500_gpio_btn_data, - } -}; - -static struct platform_device *rb500_devs[] = { - &korina_dev0, - &nand_slot0, - &cf_slot0, - &rb500_led, - &rb500_button -}; - -static void __init parse_mac_addr(char *macstr) -{ - int i, j; - unsigned char result, value; - - for (i = 0; i < 6; i++) { - result = 0; - - if (i != 5 && *(macstr + 2) != ':') - return; - - for (j = 0; j < 2; j++) { - if (isxdigit(*macstr) - && (value = - isdigit(*macstr) ? *macstr - - '0' : toupper(*macstr) - 'A' + 10) < 16) { - result = result * 16 + value; - macstr++; - } else - return; - } - - macstr++; - korina_dev0_data.mac[i] = result; - } -} - - -/* DEVICE CONTROLLER 1 */ -#define CFG_DC_DEV1 (void*)0xb8010010 -#define CFG_DC_DEV2 (void*)0xb8010020 -#define CFG_DC_DEVBASE 0x0 -#define CFG_DC_DEVMASK 0x4 -#define CFG_DC_DEVC 0x8 -#define CFG_DC_DEVTC 0xC - -/* NAND definitions */ -#define NAND_CHIP_DELAY 25 - -static int rb500_nand_fixup(struct mtd_info *mtd) -{ - struct nand_chip *chip = mtd->priv; - - if (mtd->writesize == 512) - chip->ecc.layout = &rb500_nand_ecclayout; - - return 0; -} - -static void __init rb500_nand_setup(void) -{ - switch (mips_machtype) { - case MACH_MIKROTIK_RB532A: - changeLatchU5(LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE | LO_WPX); - break; - default: - changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE); - break; - } - - /* Setup NAND specific settings */ - rb500_nand_data.chip.nr_chips = 1; - rb500_nand_data.chip.nr_partitions = ARRAY_SIZE(rb500_partition_info); - rb500_nand_data.chip.partitions = rb500_partition_info; - rb500_nand_data.chip.chip_delay = NAND_CHIP_DELAY; - rb500_nand_data.chip.options = NAND_NO_AUTOINCR; - - rb500_nand_data.chip.chip_fixup = &rb500_nand_fixup; -} - - -static int __init plat_setup_devices(void) -{ - /* Look for the CF card reader */ - if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK)) - rb500_devs[1] = NULL; - else { - cf_slot0_res[0].start = - readl(CFG_DC_DEV1 + CFG_DC_DEVBASE); - cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000; - } - - /* Read the NAND resources from the device controller */ - nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE); - nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000; - - /* Initialise the NAND device */ - rb500_nand_setup(); - - return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs)); -} - -static int __init setup_kmac(char *s) -{ - printk("korina mac = %s\n", s); - parse_mac_addr(s); - return 0; -} - -__setup("kmac=", setup_kmac); - -arch_initcall(plat_setup_devices); diff --git a/target/linux/rb532/files-2.6.24/arch/mips/rb500/gpio.c b/target/linux/rb532/files-2.6.24/arch/mips/rb500/gpio.c deleted file mode 100644 index 6c92a8fe5..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/rb500/gpio.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Miscellaneous functions for IDT EB434 board - * - * Copyright 2004 IDT Inc. (rischelp@idt.com) - * Copyright 2006 Phil Sutter <n0-1@freewrt.org> - * Copyright 2007 Florian Fainelli <florian@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/spinlock.h> -#include <linux/io.h> -#include <linux/platform_device.h> - -#include <asm/addrspace.h> -#include <asm/gpio.h> - -#include <asm/rc32434/rb.h> - -#define GPIO_BADDR 0x18050000 - -static volatile unsigned char *devCtl3Base; -static unsigned char latchU5State; -static spinlock_t clu5Lock = SPIN_LOCK_UNLOCKED; - -struct rb500_gpio_reg __iomem *rb500_gpio_reg0; -EXPORT_SYMBOL(rb500_gpio_reg0); - -static struct resource rb500_gpio_reg0_res[] = { - { - .name = "gpio_reg0", - .start = GPIO_BADDR, - .end = GPIO_BADDR + sizeof(struct rb500_gpio_reg), - .flags = IORESOURCE_MEM, - } -}; - -void set434Reg(unsigned regOffs, unsigned bit, unsigned len, unsigned val) -{ - unsigned flags, data; - unsigned i = 0; - - spin_lock_irqsave(&clu5Lock, flags); - data = *(volatile unsigned *) (IDT434_REG_BASE + regOffs); - for (i = 0; i != len; ++i) { - if (val & (1 << i)) - data |= (1 << (i + bit)); - else - data &= ~(1 << (i + bit)); - } - *(volatile unsigned *) (IDT434_REG_BASE + regOffs) = data; - spin_unlock_irqrestore(&clu5Lock, flags); -} -EXPORT_SYMBOL(set434Reg); - -void changeLatchU5(unsigned char orMask, unsigned char nandMask) -{ - unsigned flags; - - spin_lock_irqsave(&clu5Lock, flags); - latchU5State = (latchU5State | orMask) & ~nandMask; - if (!devCtl3Base) - devCtl3Base = (volatile unsigned char *) - KSEG1ADDR(*(volatile unsigned *) - KSEG1ADDR(0x18010030)); - *devCtl3Base = latchU5State; - spin_unlock_irqrestore(&clu5Lock, flags); -} -EXPORT_SYMBOL(changeLatchU5); - -unsigned char getLatchU5State(void) -{ - return latchU5State; -} -EXPORT_SYMBOL(getLatchU5State); - -int rb500_gpio_get_value(unsigned gpio) -{ - return readl(&rb500_gpio_reg0->gpiod) & (1 << gpio); -} -EXPORT_SYMBOL(rb500_gpio_get_value); - -void rb500_gpio_set_value(unsigned gpio, int value) -{ - unsigned tmp; - - tmp = readl(&rb500_gpio_reg0->gpiod) & ~(1 << gpio); - if (value) - tmp |= 1 << gpio; - - writel(tmp, (void *)&rb500_gpio_reg0->gpiod); -} -EXPORT_SYMBOL(rb500_gpio_set_value); - -int rb500_gpio_direction_input(unsigned gpio) -{ - writel(readl(&rb500_gpio_reg0->gpiocfg) & ~(1 << gpio), (void *)&rb500_gpio_reg0->gpiocfg); - - return 0; -} -EXPORT_SYMBOL(rb500_gpio_direction_input); - -int rb500_gpio_direction_output(unsigned gpio, int value) -{ - gpio_set_value(gpio, value); - writel(readl(&rb500_gpio_reg0->gpiocfg) | (1 << gpio), (void *)&rb500_gpio_reg0->gpiocfg); - - return 0; -} -EXPORT_SYMBOL(rb500_gpio_direction_output); - -void rb500_gpio_set_int_level(unsigned gpio, int value) -{ - unsigned tmp; - - tmp = readl(&rb500_gpio_reg0->gpioilevel) & ~(1 << gpio); - if (value) - tmp |= 1 << gpio; - writel(tmp, (void *)&rb500_gpio_reg0->gpioilevel); -} -EXPORT_SYMBOL(rb500_gpio_set_int_level); - -int rb500_gpio_get_int_level(unsigned gpio) -{ - return readl(&rb500_gpio_reg0->gpioilevel) & (1 << gpio); -} -EXPORT_SYMBOL(rb500_gpio_get_int_level); - -void rb500_gpio_set_int_status(unsigned gpio, int value) -{ - unsigned tmp; - - tmp = readl(&rb500_gpio_reg0->gpioistat); - if (value) - tmp |= 1 << gpio; - writel(tmp, (void *)&rb500_gpio_reg0->gpioistat); -} -EXPORT_SYMBOL(rb500_gpio_set_int_status); - -int rb500_gpio_get_int_status(unsigned gpio) -{ - return readl(&rb500_gpio_reg0->gpioistat) & (1 << gpio); -} -EXPORT_SYMBOL(rb500_gpio_get_int_status); - -void rb500_gpio_set_func(unsigned gpio, int value) -{ - unsigned tmp; - - tmp = readl(&rb500_gpio_reg0->gpiofunc); - if (value) - tmp |= 1 << gpio; - writel(tmp, (void *)&rb500_gpio_reg0->gpiofunc); -} -EXPORT_SYMBOL(rb500_gpio_set_func); - -int rb500_gpio_get_func(unsigned gpio) -{ - return readl(&rb500_gpio_reg0->gpiofunc) & (1 << gpio); -} -EXPORT_SYMBOL(rb500_gpio_get_func); - -int __init rb500_gpio_init(void) -{ - rb500_gpio_reg0 = ioremap_nocache(rb500_gpio_reg0_res[0].start, - rb500_gpio_reg0_res[0].end - - rb500_gpio_reg0_res[0].start); - - if (!rb500_gpio_reg0) { - printk(KERN_ERR "rb500: cannot remap GPIO register 0\n"); - return -ENXIO; - } - - return 0; -} -arch_initcall(rb500_gpio_init); diff --git a/target/linux/rb532/files-2.6.24/arch/mips/rb500/irq.c b/target/linux/rb532/files-2.6.24/arch/mips/rb500/irq.c deleted file mode 100644 index 3f3e900c9..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/rb500/irq.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * RC32434 interrupt routines. - * - * Copyright 2002 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * stevel@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/delay.h> - -#include <asm/bitops.h> -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/time.h> -#include <asm/mipsregs.h> -#include <asm/system.h> -#include <asm/rc32434/rc32434.h> -#include <asm/rc32434/gpio.h> - -extern void set_debug_traps(void); -extern irq_cpustat_t irq_stat [NR_CPUS]; -unsigned int local_bh_count[NR_CPUS]; -unsigned int local_irq_count[NR_CPUS]; - -static unsigned int startup_irq(unsigned int irq); -static void rb500_end_irq(unsigned int irq_nr); -static void mask_and_ack_irq(unsigned int irq_nr); -static void rb500_enable_irq(unsigned int irq_nr); -static void rb500_disable_irq(unsigned int irq_nr); - -extern void __init init_generic_irq(void); -extern struct rb500_gpio_reg __iomem *rb500_gpio_reg0; - -typedef struct { - u32 mask; /* mask of valid bits in pending/mask registers */ - volatile u32 *base_addr; -} intr_group_t; - -#define RC32434_NR_IRQS (GROUP4_IRQ_BASE + 32) - -#if (NR_IRQS < RC32434_NR_IRQS) -#error Too little irqs defined. Did you override <asm/irq.h> ? -#endif - -static const intr_group_t intr_group[NUM_INTR_GROUPS] = { - { 0x0000efff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET) }, - { 0x00001fff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET) }, - { 0x00000007, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET) }, - { 0x0003ffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET) }, - { 0xffffffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET) } -}; - -#define READ_PEND(base) (*(base)) -#define READ_MASK(base) (*(base + 2)) -#define WRITE_MASK(base, val) (*(base + 2) = (val)) - -static inline int irq_to_group(unsigned int irq_nr) -{ - return ((irq_nr - GROUP0_IRQ_BASE) >> 5); -} - -static inline int group_to_ip(unsigned int group) -{ - return group + 2; -} - -static inline void enable_local_irq(unsigned int ip) -{ - int ipnum = 0x100 << ip; - clear_c0_cause(ipnum); - set_c0_status(ipnum); -} - -static inline void disable_local_irq(unsigned int ip) -{ - int ipnum = 0x100 << ip; - clear_c0_status(ipnum); -} - -static inline void ack_local_irq(unsigned int ip) -{ - int ipnum = 0x100 << ip; - clear_c0_cause(ipnum); -} - -static void rb500_enable_irq(unsigned int irq_nr) -{ - int ip = irq_nr - GROUP0_IRQ_BASE; - unsigned int group, intr_bit; - volatile unsigned int *addr; - - - if (ip < 0) - enable_local_irq(irq_nr); - else { - group = ip >> 5; - - ip &= (1<<5)-1; - intr_bit = 1 << ip; - - enable_local_irq(group_to_ip(group)); - - addr = intr_group[group].base_addr; - WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit); - } -} - -static void rb500_disable_irq(unsigned int irq_nr) -{ - int ip = irq_nr - GROUP0_IRQ_BASE; - unsigned int group, intr_bit, mask; - volatile unsigned int *addr; - - if (ip < 0) { - disable_local_irq(irq_nr); - }else{ - group = ip >> 5; - - ip &= (1<<5) -1; - intr_bit = 1 << ip; - addr = intr_group[group].base_addr; - mask = READ_MASK(addr); - mask |= intr_bit; - WRITE_MASK(addr,mask); - - /* - * if there are no more interrupts enabled in this - * group, disable corresponding IP - */ - if (mask == intr_group[group].mask) - disable_local_irq(group_to_ip(group)); - } -} - -static unsigned int startup_irq(unsigned int irq_nr) -{ - rb500_enable_irq(irq_nr); - return 0; -} - -static void shutdown_irq(unsigned int irq_nr) -{ - rb500_disable_irq(irq_nr); - return; -} - -static void mask_and_ack_irq(unsigned int irq_nr) -{ - rb500_disable_irq(irq_nr); - ack_local_irq(group_to_ip(irq_to_group(irq_nr))); -} - -static void rb500_end_irq(unsigned int irq_nr) -{ - - int ip = irq_nr - GROUP0_IRQ_BASE; - unsigned int intr_bit, group; - volatile unsigned int *addr; - - if ((irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { - printk("warning: end_irq %d did not enable (%x)\n", - irq_nr, irq_desc[irq_nr].status); - return; - } - - if (ip < 0) { - enable_local_irq(irq_nr); - } else { - group = ip >> 5; - - ip &= (1 << 5) - 1; - intr_bit = 1 << ip; - - if (irq_nr >= GROUP4_IRQ_BASE && irq_nr <= (GROUP4_IRQ_BASE + 13)) { - rb500_gpio_reg0->gpioistat = rb500_gpio_reg0->gpioistat & ~intr_bit; - } - - enable_local_irq(group_to_ip(group)); - - addr = intr_group[group].base_addr; - WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit); - } -} - -static struct hw_interrupt_type rc32434_irq_type = { - .typename = "RB500", - .startup = startup_irq, - .shutdown = shutdown_irq, - .enable = rb500_enable_irq, - .disable = rb500_disable_irq, - .ack = mask_and_ack_irq, - .end = rb500_end_irq, -}; - - -void __init arch_init_irq(void) -{ - int i; - - printk("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS); - memset(irq_desc, 0, sizeof(irq_desc)); - - for (i = 0; i < RC32434_NR_IRQS; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &rc32434_irq_type; - spin_lock_init(&irq_desc[i].lock); - } -} - -/* Main Interrupt dispatcher */ -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int ip, pend, group; - volatile unsigned int *addr; - unsigned int cp0_cause = read_c0_cause() & read_c0_status(); - - if (cp0_cause & CAUSEF_IP7) { - do_IRQ(7); - } else if ((ip = (cp0_cause & 0x7c00))) { - group = 21 - rc32434_clz(ip); - - addr = intr_group[group].base_addr; - - pend = READ_PEND(addr); - pend &= ~READ_MASK(addr); // only unmasked interrupts - pend = 39 - rc32434_clz(pend); - do_IRQ((group << 5) + pend); - } -} diff --git a/target/linux/rb532/files-2.6.24/arch/mips/rb500/prom.c b/target/linux/rb532/files-2.6.24/arch/mips/rb500/prom.c deleted file mode 100644 index 2d03b57f9..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/rb500/prom.c +++ /dev/null @@ -1,177 +0,0 @@ -/* -* prom.c -********************************************************************** -* P . Sadik Oct 10, 2003 -* -* Started change log -* idt_cpu_freq is make a kernel configuration parameter -* idt_cpu_freq is exported so that other modules can use it. -* Code cleanup -********************************************************************** -* P. Sadik Oct 20, 2003 -* -* Removed NVRAM code from here, since they are already available under -* nvram directory. -* Added serial port initialisation. -********************************************************************** -********************************************************************** -* P. Sadik Oct 30, 2003 -* -* Added reset_cons_port -********************************************************************** - - P.Christeas, 2005-2006 - Port to 2.6, add 2.6 cmdline parsing - -*/ - -#include <linux/autoconf.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/console.h> -#include <asm/bootinfo.h> -#include <linux/bootmem.h> -#include <linux/ioport.h> -#include <linux/blkdev.h> -#include <asm/rc32434/ddr.h> - -#define PROM_ENTRY(x) (0xbfc00000+((x)*8)) -extern void __init setup_serial_port(void); - -unsigned int idt_cpu_freq = 132000000; -EXPORT_SYMBOL(idt_cpu_freq); -unsigned int gpio_bootup_state = 0; -EXPORT_SYMBOL(gpio_bootup_state); - -char mips_mac_address[18] = "08:00:06:05:40:01"; -EXPORT_SYMBOL(mips_mac_address); - -/* what to append to cmdline when button is [not] pressed */ -#define GPIO_INIT_NOBUTTON "" -#define GPIO_INIT_BUTTON " 2" - -#ifdef CONFIG_MIKROTIK_RB500 -unsigned soft_reboot = 0; -EXPORT_SYMBOL(soft_reboot); -#endif - -#define SR_NMI 0x00180000 /* NMI */ -#define SERIAL_SPEED_ENTRY 0x00000001 - -#ifdef CONFIG_REMOTE_DEBUG -extern int remote_debug; -#endif - -#define FREQ_TAG "HZ=" -#define GPIO_TAG "gpio=" -#define KMAC_TAG "kmac=" -#define MEM_TAG "mem=" -#define BOARD_TAG "board=" -#define IGNORE_CMDLINE_MEM 1 -#define DEBUG_DDR - -#define BOARD_RB532 "500" -#define BOARD_RB532A "500r5" - -void parse_soft_settings(unsigned *ptr, unsigned size); -void parse_hard_settings(unsigned *ptr, unsigned size); - -void __init prom_setup_cmdline(void); - -void __init prom_init(void) -{ - DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */ - phys_t memsize = 0-ddr->ddrmask; - - /* this should be the very first message, even before serial is properly initialized */ - prom_setup_cmdline(); - setup_serial_port(); - - soft_reboot = read_c0_status() & SR_NMI; - pm_power_off = NULL; - - /* - * give all RAM to boot allocator, - * except for the first 0x400 and the last 0x200 bytes - */ - add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM); -} - -void __init prom_free_prom_memory(void) -{ - /* No prom memory to free */ -} - -static inline int match_tag(char *arg, const char *tag) -{ - return (strncmp(arg, tag, strlen(tag)) == 0); -} - -static inline unsigned long tag2ul(char *arg, const char *tag) -{ - char *num = arg+strlen(tag); - return simple_strtoul(num, 0, 10); -} - -extern char _image_cmdline; -void __init prom_setup_cmdline(void){ - char cmd_line[CL_SIZE]; - char *cp; - int prom_argc; - char **prom_argv, **prom_envp; - int i; - - prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; - - cp=cmd_line; - /* Note: it is common that parameters start at argv[1] and not argv[0], - however, our elf loader starts at [0] */ - for(i=0;i<prom_argc;i++){ - if (match_tag(prom_argv[i], FREQ_TAG)) { - idt_cpu_freq = tag2ul(prom_argv[i], FREQ_TAG); - continue; - } -#ifdef IGNORE_CMDLINE_MEM - /* parses out the "mem=xx" arg */ - if (match_tag(prom_argv[i], MEM_TAG)) { - continue; - } -#endif - if (i>0) *(cp++) = ' '; - if (match_tag(prom_argv[i], BOARD_TAG)) { - char *board = prom_argv[i] + strlen(BOARD_TAG); - if (match_tag(board, BOARD_RB532A)) - mips_machtype = MACH_MIKROTIK_RB532A; - else - mips_machtype = MACH_MIKROTIK_RB532; - } - - if (match_tag(prom_argv[i], GPIO_TAG)) { - gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG); - } - strcpy(cp,prom_argv[i]); - cp+=strlen(prom_argv[i]); - } - *(cp++) = ' '; - strcpy(cp,(&_image_cmdline + 8)); - cp += strlen(&_image_cmdline); - - i=strlen(arcs_cmdline); - if (i>0){ - *(cp++) = ' '; - strcpy(cp,arcs_cmdline); - cp+=strlen(arcs_cmdline); - } - if (gpio_bootup_state&0x02) - strcpy(cp,GPIO_INIT_NOBUTTON); - else - strcpy(cp,GPIO_INIT_BUTTON); - cmd_line[CL_SIZE-1] = '\0'; - - strcpy(arcs_cmdline,cmd_line); -} - diff --git a/target/linux/rb532/files-2.6.24/arch/mips/rb500/serial.c b/target/linux/rb532/files-2.6.24/arch/mips/rb500/serial.c deleted file mode 100644 index 25a03e010..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/rb500/serial.c +++ /dev/null @@ -1,78 +0,0 @@ -/************************************************************************** - * - * BRIEF MODULE DESCRIPTION - * Serial port initialisation. - * - * Copyright 2004 IDT Inc. (rischelp@idt.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - ************************************************************************** - * May 2004 rkt, neb - * - * Initial Release - * - * - * - ************************************************************************** - */ - - -#include <linux/autoconf.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/serial_8250.h> - -#include <asm/time.h> -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/serial.h> -#include <asm/rc32434/rc32434.h> - -extern unsigned int idt_cpu_freq; - -static struct uart_port serial_req = { - .type = PORT_16550A, - .line = 0, - .irq = RC32434_UART0_IRQ, - //.flags = STD_COM_FLAGS, - .iotype = UPIO_MEM, - .membase = (char *) KSEG1ADDR(RC32434_UART0_BASE), -// .fifosize = 14 - .regshift = 2 -}; - -int __init setup_serial_port(void) -{ - serial_req.uartclk = idt_cpu_freq; - - if (early_serial_setup(&serial_req)) - return -ENODEV; - - return(0); -} diff --git a/target/linux/rb532/files-2.6.24/arch/mips/rb500/setup.c b/target/linux/rb532/files-2.6.24/arch/mips/rb500/setup.c deleted file mode 100644 index 0da7e6340..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/rb500/setup.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * setup.c - boot time setup code - */ - -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/irq.h> -#include <linux/ioport.h> -#include <linux/pm.h> -#include <asm/bootinfo.h> -#include <asm/mipsregs.h> -#include <asm/pgtable.h> -#include <asm/reboot.h> -#include <asm/addrspace.h> /* for KSEG1ADDR() */ -#include <asm/time.h> -#include <asm/io.h> -#include <asm/rc32434/rc32434.h> -#include <asm/rc32434/pci.h> - -#ifdef CONFIG_PCI -extern void rc32434_time_init(void); -extern int __init rc32434_pcibridge_init(void); -#endif - -#define epldMask ((volatile unsigned char *)0xB900000d) - -static void rb_machine_restart(char *command) -{ - /* just jump to the reset vector */ - * (volatile unsigned *) KSEG1ADDR(0x18008000) = 0x80000001; - ((void (*)(void))KSEG1ADDR(0x1FC00000u))(); -} - -static void rb_machine_halt(void) -{ - for(;;) continue; -} - -#ifdef CONFIG_CPU_HAS_WB -void (*__wbflush) (void); - -static void rb_write_buffer_flush(void) -{ - __asm__ __volatile__ - ("sync\n\t" "nop\n\t" "loop: bc0f loop\n\t" "nop\n\t"); -} -#endif - -void __init plat_mem_setup(void) -{ - unsigned int pciCntlVal; - - //board_time_init = rc32434_time_init; - -#ifdef CONFIG_CPU_HAS_WB - __wbflush = rb_write_buffer_flush; -#endif - _machine_restart = rb_machine_restart; - _machine_halt = rb_machine_halt; - /*_machine_power_off = rb_machine_power_halt;*/ - pm_power_off = rb_machine_halt; - - set_io_port_base(KSEG1); - - pciCntlVal=rc32434_pci->pcic; - pciCntlVal &= 0xFFFFFF7; - rc32434_pci->pcic = pciCntlVal; - -#ifdef CONFIG_PCI - /* Enable PCI interrupts in EPLD Mask register */ - *epldMask = 0x0; - *(epldMask + 1) = 0x0; -#endif - write_c0_wired(0); -} - -const char *get_system_type(void) -{ - return "MIPS RB500"; -} diff --git a/target/linux/rb532/files-2.6.24/arch/mips/rb500/time.c b/target/linux/rb532/files-2.6.24/arch/mips/rb500/time.c deleted file mode 100644 index db8584906..000000000 --- a/target/linux/rb532/files-2.6.24/arch/mips/rb500/time.c +++ /dev/null @@ -1,82 +0,0 @@ -/* -**************************************************************************** -* Carsten Langgaard, carstenl@mips.com -* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -* -*************************************************************************** -* -* This program is free software; you can distribute it and/or modify it -* under the terms of the GNU General Public License (Version 2) as -* published by the Free Software Foundation. -* -* This program is distributed in the hope it will be useful, but WITHOUT -* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -* for more details. -* -* You should have received a copy of the GNU General Public License along -* with this program; if not, write to the Free Software Foundation, Inc., -* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -* -**************************************************************************** -* -* Setting up the clock on the MIPS boards. -* -**************************************************************************** -* P. Sadik Oct 10, 2003 -* -* Started change log. -* mips_counter_frequency is now calculated at run time, based on idt_cpu_freq. -* Code cleanup -**************************************************************************** -*/ - -#include <linux/autoconf.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/mc146818rtc.h> -#include <linux/irq.h> -#include <linux/timex.h> - -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> -#include <asm/ptrace.h> -#include <asm/debug.h> -#include <asm/rc32434/rc32434.h> - -static unsigned long r4k_offset; /* Amount to incr compare reg each time */ -extern unsigned int mips_hpt_frequency; -extern unsigned int idt_cpu_freq; - -/* - * Figure out the r4k offset, the amount to increment the compare - * register for each time tick. There is no RTC available. - * - * The RC32434 counts at half the CPU *core* speed. - */ -static unsigned long __init cal_r4koff(void) -{ - mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2; - return (mips_hpt_frequency / HZ); -} - - -void __init plat_time_init(void) -{ - unsigned int est_freq, flags; - - local_irq_save(flags); - - printk("calculating r4koff... "); - r4k_offset = cal_r4koff(); - printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); - - est_freq = 2*r4k_offset*HZ; - est_freq += 5000; /* round */ - est_freq -= est_freq%10000; - printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, - (est_freq%1000000)*100/1000000); - local_irq_restore(flags); -} diff --git a/target/linux/rb532/files-2.6.24/drivers/block/rb500/Makefile b/target/linux/rb532/files-2.6.24/drivers/block/rb500/Makefile deleted file mode 100644 index 3e14dc35b..000000000 --- a/target/linux/rb532/files-2.6.24/drivers/block/rb500/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -## Makefile for the RB532 CF port - -obj-y += bdev.o ata.o diff --git a/target/linux/rb532/files-2.6.24/drivers/block/rb500/ata.c b/target/linux/rb532/files-2.6.24/drivers/block/rb500/ata.c deleted file mode 100644 index 31e6782fa..000000000 --- a/target/linux/rb532/files-2.6.24/drivers/block/rb500/ata.c +++ /dev/null @@ -1,487 +0,0 @@ -/* CF-mips driver - This is a block driver for the direct (mmaped) interface to the CF-slot, - found in Routerboard.com's RB532 board - See SDK provided from routerboard.com. - - Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6. - Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org> - - This work is redistributed under the terms of the GNU General Public License. -*/ - -#include <linux/kernel.h> /* printk() */ -#include <linux/module.h> /* module to be loadable */ -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/ioport.h> /* request_mem_region() */ - -#include <asm/gpio.h> -#include <asm/unaligned.h> /* ioremap() */ -#include <asm/io.h> /* ioremap() */ -#include <asm/rc32434/rb.h> - -#include "ata.h" - -#define REQUEST_MEM_REGION 0 -#define DEBUG 1 - -#if DEBUG -#define DEBUGP printk -#else -#define DEBUGP(format, args...) -#endif - -#define SECS 1000000 /* unit for wait_not_busy() is 1us */ - -unsigned cf_head = 0; -unsigned cf_cyl = 0; -unsigned cf_spt = 0; -unsigned cf_sectors = 0; -static unsigned cf_block_size = 1; -static void *baddr = 0; - -#define DBUF32 ((volatile u32 *)((unsigned long)dev->baddr | ATA_DBUF_OFFSET)) - - -static void cf_do_tasklet(unsigned long dev_l); - - -static inline void wareg(u8 val, unsigned reg, struct cf_mips_dev* dev) -{ - writeb(val, dev->baddr + ATA_REG_OFFSET + reg); -} - -static inline u8 rareg(unsigned reg, struct cf_mips_dev* dev) -{ - return readb(dev->baddr + ATA_REG_OFFSET + reg); -} - -static inline int cfrdy(struct cf_mips_dev *dev) -{ - return gpio_get_value(dev->pin); -} - -static inline void prepare_cf_irq(struct cf_mips_dev *dev) -{ - rb500_gpio_set_int_level(1, dev->pin); /* interrupt on cf ready (not busy) */ - rb500_gpio_set_int_status(0, dev->pin); /* clear interrupt status */ -} - -static inline int cf_present(struct cf_mips_dev* dev) -{ - /* TODO: read and configure CIS into memory mapped mode - * TODO: parse CISTPL_CONFIG on CF+ cards to get base address (0x200) - * TODO: maybe adjust power saving setting for Hitachi Microdrive - */ - int i; - - /* setup CFRDY GPIO as input */ - rb500_gpio_set_func(dev->pin, 0); - gpio_direction_input(dev->pin); - - for (i = 0; i < 0x10; ++i) { - if (rareg(i,dev) != 0xff) - return 1; - } - return 0; -} - -static inline int is_busy(struct cf_mips_dev *dev) -{ - return !cfrdy(dev); -} - -static int wait_not_busy(int to_us, int wait_for_busy,struct cf_mips_dev *dev) -{ - int us_passed = 0; - if (wait_for_busy && !is_busy(dev)) { - /* busy must appear within 400ns, - * but it may dissapear before we see it - * => must not wait for busy in a loop - */ - ndelay(400); - } - - do { - if (us_passed) - udelay(1); /* never reached in async mode */ - if (!is_busy(dev)) { - if (us_passed > 1 * SECS) { - printk(KERN_WARNING "cf-mips: not busy ok (after %dus)" - ", status 0x%02x\n", us_passed, (unsigned) rareg(ATA_REG_ST,dev)); - } - return CF_TRANS_OK; - } - if (us_passed == 1 * SECS) { - printk(KERN_WARNING "cf-mips: wait not busy %dus..\n", to_us); - } - if (dev->async_mode) { - dev->to_timer.expires = jiffies + (to_us * HZ / SECS); - dev->irq_enable_time = jiffies; - prepare_cf_irq(dev); - if (is_busy(dev)) { - add_timer(&dev->to_timer); - enable_irq(dev->irq); - return CF_TRANS_IN_PROGRESS; - } - continue; - } - ++us_passed; - } while (us_passed < to_us); - - printk(KERN_ERR "cf-mips: wait not busy timeout (%dus)" - ", status 0x%02x, state %d\n", - to_us, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate); - return CF_TRANS_FAILED; -} - -static irqreturn_t cf_irq_handler(int irq, void *dev_id) -{ - /* While tasklet has not disabled irq, irq will be retried all the time - * because of ILEVEL matching GPIO pin status => deadlock. - * To avoid this, we change ILEVEL to 0. - */ - struct cf_mips_dev *dev=dev_id; - - rb500_gpio_set_int_level(0, dev->pin); - rb500_gpio_set_int_status(0, dev->pin); - - del_timer(&dev->to_timer); - tasklet_schedule(&dev->tasklet); - return IRQ_HANDLED; -} - -static int do_reset(struct cf_mips_dev *dev) -{ - printk(KERN_INFO "cf-mips: resetting..\n"); - - wareg(ATA_REG_DC_SRST, ATA_REG_DC,dev); - udelay(1); /* FIXME: how long should we wait here? */ - wareg(0, ATA_REG_DC,dev); - - return wait_not_busy(30 * SECS, 1,dev); -} - -static int set_multiple(struct cf_mips_dev *dev) -{ - if (dev->block_size <= 1) - return CF_TRANS_OK; - - wareg(dev->block_size, ATA_REG_SC,dev); - wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev); - wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev); - - return wait_not_busy(10 * SECS, 1,dev); -} - -static int set_cmd(struct cf_mips_dev *dev) -{ - //DEBUGP(KERN_INFO "cf-mips: ata cmd 0x%02x\n", dev->tcmd); - // sector_count should be <=24 bits.. - BUG_ON(dev->tsect_start>=0x10000000); - // This way, it addresses 2^24 * 512 = 128G - - if (dev->tsector_count) { - wareg(dev->tsector_count & 0xff, ATA_REG_SC,dev); - wareg(dev->tsect_start & 0xff, ATA_REG_SN,dev); - wareg((dev->tsect_start >> 8) & 0xff, ATA_REG_CL,dev); - wareg((dev->tsect_start >> 16) & 0xff, ATA_REG_CH,dev); - } - wareg(((dev->tsect_start >> 24) & 0x0f) | ATA_REG_DH_BASE | ATA_REG_DH_LBA, - ATA_REG_DH,dev); /* select drive on all commands */ - wareg(dev->tcmd, ATA_REG_CMD,dev); - return wait_not_busy(10 * SECS, 1,dev); -} - -static int do_trans(struct cf_mips_dev *dev) -{ - int res; - unsigned st; - int transfered; - - //printk("do_trans: %d sectors left\n",dev->tsectors_left); - while (dev->tsectors_left) { - transfered = 0; - - st = rareg(ATA_REG_ST,dev); - if (!(st & ATA_REG_ST_DRQ)) { - printk(KERN_ERR "cf-mips: do_trans without DRQ (status 0x%x)!\n", st); - if (st & ATA_REG_ST_ERR) { - int errId = rareg(ATA_REG_ERR,dev); - printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n", - (dev->tread ? "read" : "write"), st, errId); - } - return CF_TRANS_FAILED; - } - do { /* Fill/read the buffer one block */ - u32 *qbuf, *qend; - qbuf = (u32 *)dev->tbuf; - qend = qbuf + CF_SECT_SIZE / sizeof(u32); - if (dev->tread) { - while (qbuf!=qend) - put_unaligned(*DBUF32,qbuf++); - //*(qbuf++) = *DBUF32; - } - else { - while(qbuf!=qend) - *DBUF32 = get_unaligned(qbuf++); - } - - dev->tsectors_left--; - dev->tbuf += CF_SECT_SIZE; - dev->tbuf_size -= CF_SECT_SIZE; - transfered++; - } while (transfered != dev->block_size && dev->tsectors_left > 0); - - res = wait_not_busy(10 * SECS, 1,dev); - if (res != CF_TRANS_OK) - return res; - }; - - st = rareg(ATA_REG_ST,dev); - if (st & (ATA_REG_ST_DRQ | ATA_REG_ST_DWF | ATA_REG_ST_ERR)) { - if (st & ATA_REG_ST_DRQ) { - printk(KERN_ERR "cf-mips: DRQ after all %d sectors are %s" - ", status 0x%x\n", dev->tsector_count, (dev->tread ? "read" : "written"), st); - } else if (st & ATA_REG_ST_DWF) { - printk(KERN_ERR "cf-mips: write fault, status 0x%x\n", st); - } else { - int errId = rareg(ATA_REG_ERR,dev); - printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n", - (dev->tread ? "read" : "write"), st, errId); - } - return CF_TRANS_FAILED; - } - return CF_TRANS_OK; -} - -static int cf_do_state(struct cf_mips_dev *dev) -{ - int res; - switch (dev->tstate) { /* fall through everywhere */ - case TS_IDLE: - dev->tstate = TS_READY; - if (is_busy(dev)) { - dev->tstate = TS_AFTER_RESET; - res = do_reset(dev); - if (res != CF_TRANS_OK) - break; - } - case TS_AFTER_RESET: - if (dev->tstate == TS_AFTER_RESET) { - dev->tstate = TS_READY; - res = set_multiple(dev); - if (res != CF_TRANS_OK) - break; - } - case TS_READY: - dev->tstate = TS_CMD; - res = set_cmd(dev); - if (res != CF_TRANS_OK) - break;; - case TS_CMD: - dev->tstate = TS_TRANS; - case TS_TRANS: - res = do_trans(dev); - break; - default: - printk(KERN_ERR "cf-mips: BUG: unknown tstate %d\n", dev->tstate); - return CF_TRANS_FAILED; - } - if (res != CF_TRANS_IN_PROGRESS) - dev->tstate = TS_IDLE; - return res; -} - -static void cf_do_tasklet(unsigned long dev_l) -{ - struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l; - int res; - - disable_irq(dev->irq); - - if (dev->tstate == TS_IDLE) - return; /* can happen when irq is first registered */ - -#if 0 - DEBUGP(KERN_WARNING "cf-mips: not busy ok (tasklet) status 0x%02x\n", - (unsigned) rareg(ATA_REG_ST,dev)); -#endif - - res = cf_do_state(dev); - if (res == CF_TRANS_IN_PROGRESS) - return; - cf_async_trans_done(dev,res); -} - -static void cf_async_timeout(unsigned long dev_l) -{ - struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l; - disable_irq(dev->irq); - /* Perhaps send abort to the device? */ - printk(KERN_ERR "cf-mips: wait not busy timeout (%lus)" - ", status 0x%02x, state %d\n", - jiffies - dev->irq_enable_time, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate); - dev->tstate = TS_IDLE; - cf_async_trans_done(dev,CF_TRANS_FAILED); -} - -int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect, - char* buffer, int is_write) -{ - BUG_ON(dev->tstate!=TS_IDLE); - if (nsect > ATA_MAX_SECT_PER_CMD) { - printk(KERN_WARNING "cf-mips: sector count %lu out of range\n",nsect); - return CF_TRANS_FAILED; - } - if (sector + nsect > dev->sectors) { - printk(KERN_WARNING "cf-mips: sector %lu out of range\n",sector); - return CF_TRANS_FAILED; - } - dev->tbuf = buffer; - dev->tbuf_size = nsect*512; - dev->tsect_start = sector; - dev->tsector_count = nsect; - dev->tsectors_left = dev->tsector_count; - dev->tread = (is_write)?0:1; - - dev->tcmd = (dev->block_size == 1 ? - (is_write ? ATA_CMD_WRITE_SECTORS : ATA_CMD_READ_SECTORS) : - (is_write ? ATA_CMD_WRITE_MULTIPLE : ATA_CMD_READ_MULTIPLE)); - - return cf_do_state(dev); -} - -static int do_identify(struct cf_mips_dev *dev) -{ - u16 sbuf[CF_SECT_SIZE >> 1]; - int res; - char tstr[17]; //serial - char tmp; - int i; - BUG_ON(dev->tstate!=TS_IDLE); - dev->tbuf = (char *) sbuf; - dev->tbuf_size = CF_SECT_SIZE; - dev->tsect_start = 0; - dev->tsector_count = 0; - dev->tsectors_left = 1; - dev->tread = 1; - dev->tcmd = ATA_CMD_IDENTIFY_DRIVE; - - DEBUGP(KERN_INFO "cf-mips: identify drive..\n"); - res = cf_do_state(dev); - if (res == CF_TRANS_IN_PROGRESS) { - printk(KERN_ERR "cf-mips: BUG: async identify cmd\n"); - return CF_TRANS_FAILED; - } - if (res != CF_TRANS_OK) - return 0; - - dev->head = sbuf[3]; - dev->cyl = sbuf[1]; - dev->spt = sbuf[6]; - dev->sectors = ((unsigned long) sbuf[7] << 16) | sbuf[8]; - dev->dtype=sbuf[0]; - memcpy(tstr, &sbuf[12], 16); - tstr[16] = '\0'; - - /* Byte-swap the serial number */ - for (i = 0; i<8; i++) { - tmp = tstr[i * 2]; - tstr[i * 2] = tstr[i * 2 +1]; - tstr[i * 2 + 1] = tmp; - } - - printk(KERN_INFO "cf-mips: %s detected, C/H/S=%d/%d/%d sectors=%u (%uMB) Serial=%s\n", - (sbuf[0] == 0x848A ? "CF card" : "ATA drive"), dev->cyl, dev->head, - dev->spt, dev->sectors, dev->sectors >> 11, tstr); - return 1; -} - -static void init_multiple(struct cf_mips_dev * dev) -{ - int res; - DEBUGP(KERN_INFO "cf-mips: detecting block size\n"); - - dev->block_size = 128; /* max block size = 128 sectors (64KB) */ - do { - wareg(dev->block_size, ATA_REG_SC,dev); - wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev); - wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev); - - res = wait_not_busy(10 * SECS, 1,dev); - if (res != CF_TRANS_OK) { - printk(KERN_ERR "cf-mips: failed to detect block size: busy!\n"); - dev->block_size = 1; - return; - } - if ((rareg(ATA_REG_ST,dev) & ATA_REG_ST_ERR) == 0) - break; - dev->block_size /= 2; - } while (dev->block_size > 1); - - printk(KERN_INFO "cf-mips: multiple sectors = %d\n", dev->block_size); -} - -int cf_init(struct cf_mips_dev *dev) -{ - tasklet_init(&dev->tasklet,cf_do_tasklet,(unsigned long)dev); - dev->baddr = ioremap_nocache((unsigned long)dev->base, CFDEV_BUF_SIZE); - if (!dev->baddr) { - printk(KERN_ERR "cf-mips: cf_init: ioremap for (%lx,%x) failed\n", - (unsigned long) dev->base, CFDEV_BUF_SIZE); - return -EBUSY; - } - - if (!cf_present(dev)) { - printk(KERN_WARNING "cf-mips: cf card not present\n"); - iounmap(dev->baddr); - return -ENODEV; - } - - if (do_reset(dev) != CF_TRANS_OK) { - printk(KERN_ERR "cf-mips: cf reset failed\n"); - iounmap(dev->baddr); - return -EBUSY; - } - - if (!do_identify(dev)) { - printk(KERN_ERR "cf-mips: cf identify failed\n"); - iounmap(dev->baddr); - return -EBUSY; - } - -/* set_apm_level(ATA_APM_WITH_STANDBY); */ - init_multiple(dev); - - init_timer(&dev->to_timer); - dev->to_timer.function = cf_async_timeout; - dev->to_timer.data = (unsigned long)dev; - - prepare_cf_irq(dev); - if (request_irq(dev->irq, cf_irq_handler, 0, "CF Mips", dev)) { - printk(KERN_ERR "cf-mips: failed to get irq\n"); - iounmap(dev->baddr); - return -EBUSY; - } - /* Disable below would be odd, because request will enable, and the tasklet - will disable it itself */ - //disable_irq(dev->irq); - - dev->async_mode = 1; - - return 0; -} - -void cf_cleanup(struct cf_mips_dev *dev) -{ - iounmap(dev->baddr); - free_irq(dev->irq, NULL); -#if REQUEST_MEM_REGION - release_mem_region((unsigned long)dev->base, CFDEV_BUF_SIZE); -#endif -} - - -/*eof*/ diff --git a/target/linux/rb532/files-2.6.24/drivers/block/rb500/ata.h b/target/linux/rb532/files-2.6.24/drivers/block/rb500/ata.h deleted file mode 100644 index 15e882630..000000000 --- a/target/linux/rb532/files-2.6.24/drivers/block/rb500/ata.h +++ /dev/null @@ -1,143 +0,0 @@ -/* CF-mips driver - This is a block driver for the direct (mmaped) interface to the CF-slot, - found in Routerboard.com's RB532 board - See SDK provided from routerboard.com. - - Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6. - Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org> - - This work is redistributed under the terms of the GNU General Public License. -*/ - -#ifndef __CFMIPS_ATA_H__ -#define __CFMIPS_ATA_H__ - -#include <linux/interrupt.h> - -#define CFG_DC_DEV1 (void*)0xb8010010 -#define CFG_DC_DEVBASE 0x0 -#define CFG_DC_DEVMASK 0x4 -#define CFG_DC_DEVC 0x8 -#define CFG_DC_DEVTC 0xC - -#define CFDEV_BUF_SIZE 0x1000 -#define ATA_CIS_OFFSET 0x200 -#define ATA_REG_OFFSET 0x800 -#define ATA_DBUF_OFFSET 0xC00 - -#define ATA_REG_FEAT 0x1 -#define ATA_REG_SC 0x2 -#define ATA_REG_SN 0x3 -#define ATA_REG_CL 0x4 -#define ATA_REG_CH 0x5 -#define ATA_REG_DH 0x6 -#define ATA_REG_DH_BASE 0xa0 -#define ATA_REG_DH_LBA 0x40 -#define ATA_REG_DH_DRV 0x10 -#define ATA_REG_CMD 0x7 -#define ATA_REG_ST 0x7 -#define ATA_REG_ST_BUSY 0x80 -#define ATA_REG_ST_RDY 0x40 -#define ATA_REG_ST_DWF 0x20 -#define ATA_REG_ST_DSC 0x10 -#define ATA_REG_ST_DRQ 0x08 -#define ATA_REG_ST_CORR 0x04 -#define ATA_REG_ST_ERR 0x01 -#define ATA_REG_ERR 0xd -#define ATA_REG_DC 0xe -#define ATA_REG_DC_IEN 0x02 -#define ATA_REG_DC_SRST 0x04 - -#define ATA_CMD_READ_SECTORS 0x20 -#define ATA_CMD_WRITE_SECTORS 0x30 -#define ATA_CMD_EXEC_DRIVE_DIAG 0x90 -#define ATA_CMD_READ_MULTIPLE 0xC4 -#define ATA_CMD_WRITE_MULTIPLE 0xC5 -#define ATA_CMD_SET_MULTIPLE 0xC6 -#define ATA_CMD_IDENTIFY_DRIVE 0xEC -#define ATA_CMD_SET_FEATURES 0xEF - -#define ATA_FEATURE_ENABLE_APM 0x05 -#define ATA_FEATURE_DISABLE_APM 0x85 -#define ATA_APM_DISABLED 0x00 -#define ATA_APM_MIN_POWER 0x01 -#define ATA_APM_WITH_STANDBY 0x7f -#define ATA_APM_WITHOUT_STANDBY 0x80 -#define ATA_APM_MAX_PERFORMANCE 0xfe - -#define CF_SECT_SIZE 0x200 -/* That is the ratio CF_SECT_SIZE/512 (the kernel sector size) */ -#define CF_KERNEL_MUL 1 -#define ATA_MAX_SECT_PER_CMD 0x100 - -#define CF_TRANS_FAILED 0 -#define CF_TRANS_OK 1 -#define CF_TRANS_IN_PROGRESS 2 - - -enum trans_state { - TS_IDLE = 0, - TS_AFTER_RESET, - TS_READY, - TS_CMD, - TS_TRANS -}; - -// -// #if DEBUG -// static unsigned long busy_time; -// #endif - -/** Struct to hold the cfdev -Actually, all the data here only has one instance. However, for -reasons of programming conformity, it is passed around as a pointer -*/ -struct cf_mips_dev { - void *base; /* base address for I/O */ - void *baddr; /* remapped address */ - - int pin; /* gpio pin */ - int irq; /* gpio irq */ - - unsigned head; - unsigned cyl; - unsigned spt; - unsigned sectors; - - unsigned short block_size; - unsigned dtype ; // ATA or CF - struct request_queue *queue; - struct gendisk *gd; - - /* Transaction state */ - enum trans_state tstate; - char *tbuf; - unsigned long tbuf_size; - sector_t tsect_start; - unsigned tsector_count; - unsigned tsectors_left; - int tread; - unsigned tcmd; - int async_mode; - unsigned long irq_enable_time; - - struct request *active_req; /* A request is being carried out. Is that different from tstate? */ - int users; - struct timer_list to_timer; - struct tasklet_struct tasklet; - - /** This lock ensures that the requests to this device are all done - atomically. Transfers can run in parallel, requests are all queued - one-by-one */ - spinlock_t lock; -}; - -int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect, - char* buffer, int is_write); -int cf_init(struct cf_mips_dev* dev); -void cf_cleanup(struct cf_mips_dev* dev); - -void cf_async_trans_done(struct cf_mips_dev* dev, int result); -// void *cf_get_next_buf(unsigned long *buf_size); - -#endif diff --git a/target/linux/rb532/files-2.6.24/drivers/block/rb500/bdev.c b/target/linux/rb532/files-2.6.24/drivers/block/rb500/bdev.c deleted file mode 100644 index f8a9b02d7..000000000 --- a/target/linux/rb532/files-2.6.24/drivers/block/rb500/bdev.c +++ /dev/null @@ -1,340 +0,0 @@ -/* CF-mips driver - This is a block driver for the direct (mmaped) interface to the CF-slot, - found in Routerboard.com's RB532 board - See SDK provided from routerboard.com. - - Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6. - Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org> - - This work is redistributed under the terms of the GNU General Public License. -*/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/time.h> -#include <linux/wait.h> -#include <linux/fs.h> -#include <linux/genhd.h> -#include <linux/blkdev.h> -#include <linux/blkpg.h> -#include <linux/hdreg.h> -#include <linux/platform_device.h> - -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/gpio.h> - -#include <asm/rc32434/rb.h> - -#ifdef DEBUG -#define DEBUGP printk -#define DLEVEL 1 -#else -#define DEBUGP(format, args...) -#define DLEVEL 0 -#endif - -#define CF_MIPS_MAJOR 13 -#define MAJOR_NR CF_MIPS_MAJOR -#define CF_MAX_PART 16 /* max 15 partitions */ - -#include "ata.h" - -//extern struct block_device_operations cf_bdops; - -// static struct hd_struct cf_parts[CF_MAX_PART]; -// static int cf_part_sizes[CF_MAX_PART]; -// static int cf_hsect_sizes[CF_MAX_PART]; -// static int cf_max_sectors[CF_MAX_PART]; -// static int cf_blksize_sizes[CF_MAX_PART]; - -// static spinlock_t lock = SPIN_LOCK_UNLOCKED; - -// volatile int cf_busy = 0; - -static struct request *active_req = NULL; - -static int cf_open (struct inode *, struct file *); -static int cf_release (struct inode *, struct file *); -static int cf_ioctl (struct inode *, struct file *, unsigned, unsigned long); - -static void cf_request(request_queue_t * q); -static int cf_transfer(const struct request *req); - -/*long (*unlocked_ioctl) (struct file *, unsigned, unsigned long); -long (*compat_ioctl) (struct file *, unsigned, unsigned long);*/ -// int (*direct_access) (struct block_device *, sector_t, unsigned long *); -// int (*media_changed) (struct gendisk *); -// int (*revalidate_disk) (struct gendisk *); - -static struct block_device_operations cf_bdops = { - .owner = THIS_MODULE, - .open = cf_open, - .release = cf_release, - .ioctl = cf_ioctl, - .media_changed = NULL, - .unlocked_ioctl = NULL, - .revalidate_disk = NULL, - .compat_ioctl = NULL, - .direct_access = NULL -}; - - -int cf_mips_probe(struct platform_device *pdev) -{ - struct gendisk* cf_gendisk=NULL; - struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data; - struct cf_mips_dev *dev; - struct resource *r; - int reg_result; - - reg_result = register_blkdev(MAJOR_NR, "cf-mips"); - if (reg_result < 0) { - printk(KERN_WARNING "cf-mips: can't get major %d\n", MAJOR_NR); - return reg_result; - } - - dev = (struct cf_mips_dev *)kmalloc(sizeof(struct cf_mips_dev),GFP_KERNEL); - if (!dev) - goto out_err; - memset(dev, 0, sizeof(struct cf_mips_dev)); - cdev->dev = dev; - - dev->pin = cdev->gpio_pin; - dev->irq = platform_get_irq_byname(pdev, "cf_irq"); - r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cf_membase"); - dev->base = (void *) r->start; - - if (cf_init(dev)) goto out_err; - printk("init done"); - - spin_lock_init(&dev->lock); - dev->queue = blk_init_queue(cf_request,&dev->lock); - if (!dev->queue){ - printk(KERN_ERR "cf-mips: no mem for queue\n"); - goto out_err; - } - blk_queue_max_sectors(dev->queue,ATA_MAX_SECT_PER_CMD); - - /* For memory devices, it is always better to avoid crossing segments - inside the same request. */ -/* if (dev->dtype==0x848A){ - printk(KERN_INFO "Setting boundary for cf to 0x%x",(dev->block_size*512)-1); - blk_queue_segment_boundary(dev->queue, (dev->block_size*512)-1); - }*/ - - dev->gd = alloc_disk(CF_MAX_PART); - cf_gendisk = dev->gd; - cdev->gd = dev->gd; - if (!cf_gendisk) goto out_err; /* Last of these goto's */ - - cf_gendisk->major = MAJOR_NR; - cf_gendisk->first_minor = 0; - cf_gendisk->queue=dev->queue; - BUG_ON(cf_gendisk->minors != CF_MAX_PART); - strcpy(cf_gendisk->disk_name,"cfa"); - cf_gendisk->fops = &cf_bdops; - cf_gendisk->flags = 0 ; /* is not yet GENHD_FL_REMOVABLE */ - cf_gendisk->private_data=dev; - - set_capacity(cf_gendisk,dev->sectors * CF_KERNEL_MUL); - - /* Let the disk go live */ - add_disk(cf_gendisk); -#if 0 - result = cf_init(); - - /* default cfg for all partitions */ - memset(cf_parts, 0, sizeof (cf_parts[0]) * CF_MAX_PART); - memset(cf_part_sizes, 0, sizeof (cf_part_sizes[0]) * CF_MAX_PART); - for (i = 0; i < CF_MAX_PART; ++i) { - cf_hsect_sizes[i] = CF_SECT_SIZE; - cf_max_sectors[i] = ATA_MAX_SECT_PER_CMD; - cf_blksize_sizes[i] = BLOCK_SIZE; - } - - /* setup info for whole disk (partition 0) */ - cf_part_sizes[0] = cf_sectors / 2; - cf_parts[0].nr_sects = cf_sectors; - - blk_size[MAJOR_NR] = cf_part_sizes; - blksize_size[MAJOR_NR] = cf_blksize_sizes; - max_sectors[MAJOR_NR] = cf_max_sectors; - hardsect_size[MAJOR_NR] = cf_hsect_sizes; - read_ahead[MAJOR_NR] = 8; /* (4kB) */ - - blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), DEVICE_REQUEST); - - add_gendisk(&cf_gendisk); -#endif -// printk(KERN_INFO "cf-mips partition check: \n"); -// register_disk(cf_gendisk, MKDEV(MAJOR_NR, 0), CF_MAX_PART, -// &cf_bdops, dev->sectors); - return 0; - -out_err: - if (dev->queue){ - blk_cleanup_queue(dev->queue); - } - if (reg_result) { - unregister_blkdev(MAJOR_NR, "cf-mips"); - return reg_result; - } - if (dev){ - cf_cleanup(dev); - kfree(dev); - } - return 1; -} - -static int -cf_mips_remove(struct platform_device *pdev) -{ - struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data; - struct cf_mips_dev *dev = (struct cf_mips_dev *) cdev->dev; - - unregister_blkdev(MAJOR_NR, "cf-mips"); - blk_cleanup_queue(dev->queue); - - del_gendisk(dev->gd); - cf_cleanup(dev); - return 0; -} - - -static struct platform_driver cf_driver = { - .driver.name = "rb500-cf", - .probe = cf_mips_probe, - .remove = cf_mips_remove, -}; - -static int __init cf_mips_init(void) -{ - printk(KERN_INFO "cf-mips module loaded\n"); - return platform_driver_register(&cf_driver); -} - -static void cf_mips_cleanup(void) -{ - platform_driver_unregister(&cf_driver); - printk(KERN_INFO "cf-mips module removed\n"); -} - -module_init(cf_mips_init); -module_exit(cf_mips_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS_BLOCKDEV_MAJOR(CF_MIPS_MAJOR); - - -static int cf_open(struct inode *inode, struct file *filp) -{ - struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data; - int minor = MINOR(inode->i_rdev); - - if (minor >= CF_MAX_PART) - return -ENODEV; - //DEBUGP(KERN_INFO "cf-mips module opened, minor %d\n", minor); - spin_lock(&dev->lock); - dev->users++; - spin_unlock(&dev->lock); - filp->private_data=dev; - - /* dirty workaround to set CFRDY GPIO as an input when some other - program sets it as an output */ - gpio_set_value(dev->pin, 0); - return 0; /* success */ -} - -static int cf_release(struct inode *inode, struct file *filp) -{ - int minor = MINOR(inode->i_rdev); - struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data; - spin_lock(&dev->lock); - dev->users--; - spin_unlock(&dev->lock); - return 0; -} - -static int cf_ioctl(struct inode *inode, struct file *filp, - unsigned int cmd, unsigned long arg) -{ - unsigned minor = MINOR(inode->i_rdev); - struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data; - - DEBUGP(KERN_INFO "cf_ioctl cmd %u\n", cmd); - switch (cmd) { - case BLKRRPART: /* re-read partition table */ - if (!capable(CAP_SYS_ADMIN)) - return -EACCES; - printk(KERN_INFO "cf-mips partition check: \n"); - register_disk(dev->gd); - return 0; - - case HDIO_GETGEO: - { - struct hd_geometry geo; - geo.cylinders = dev->cyl; - geo.heads = dev->head; - geo.sectors = dev->spt; - geo.start = (*dev->gd->part)[minor].start_sect; - if (copy_to_user((void *) arg, &geo, sizeof (geo))) - return -EFAULT; - } - return 0; - } - - return -EINVAL; /* unknown command */ -} - -static void cf_request(request_queue_t * q) -{ - struct cf_mips_dev* dev; - - struct request * req; - int status; - - /* We could have q->queuedata = dev , but haven't yet. */ - if (active_req) - return; - - while ((req=elv_next_request(q))!=NULL){ - dev=req->rq_disk->private_data; - status=cf_transfer(req); - if (status==CF_TRANS_IN_PROGRESS){ - active_req=req; - return; - } - end_request(req,status); - } -} - -static int cf_transfer(const struct request *req) -{ - struct cf_mips_dev* dev=req->rq_disk->private_data; - - if (!blk_fs_request(req)){ - if (printk_ratelimit()) - printk(KERN_WARNING "cf-mips: skipping non-fs request 0x%x\n",req->cmd[0]); - return CF_TRANS_FAILED; - } - - return cf_do_transfer(dev,req->sector,req->current_nr_sectors,req->buffer,rq_data_dir(req)); -} - -void cf_async_trans_done(struct cf_mips_dev * dev,int result) -{ - struct request *req; - - spin_lock(&dev->lock); - req=active_req; - active_req=NULL; - end_request(req,result); - spin_unlock(&dev->lock); - - spin_lock(&dev->lock); - cf_request(dev->queue); - spin_unlock(&dev->lock); -} - diff --git a/target/linux/rb532/files-2.6.24/drivers/leds/leds-rb500.c b/target/linux/rb532/files-2.6.24/drivers/leds/leds-rb500.c deleted file mode 100644 index 3ab530a75..000000000 --- a/target/linux/rb532/files-2.6.24/drivers/leds/leds-rb500.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * linux/drivers/leds/leds-rb500.c - * - * Copyright (C) 2006 - * Twente Institute for Wireless and Mobile Communications BV - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details (see file GPLv2). - * - * Author: Tjalling Hattink <tjalling.hattink@ti-wmc.nl> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/leds.h> -#include <asm/rc32434/rb.h> - -static void rb500led_amber_set(struct led_classdev *led_cdev, enum led_brightness value) -{ - if (value) - changeLatchU5(LO_ULED, 0); - else - changeLatchU5(0, LO_ULED); -} - -static struct led_classdev rb500_amber_led = { - .name = "rb500led:amber", - .default_trigger = "ide-disk", - .brightness_set = rb500led_amber_set, -}; - -static int rb500led_probe(struct platform_device *pdev) -{ - int ret; - - changeLatchU5(0, LO_ULED); - - ret = led_classdev_register(&pdev->dev, &rb500_amber_led); - - return ret; -} - -static int rb500led_remove(struct platform_device *pdev) -{ - led_classdev_unregister(&rb500_amber_led); - - return 0; -} - -static struct platform_driver rb500led_driver = { - .probe = rb500led_probe, - .remove = rb500led_remove, - .driver = { - .name = "rb500-led", - }, -}; - -static int __init rb500led_init(void) -{ - return platform_driver_register(&rb500led_driver); -} - -static void __exit rb500led_exit(void) -{ - platform_driver_unregister(&rb500led_driver); -} - -module_init(rb500led_init); -module_exit(rb500led_exit); - -MODULE_AUTHOR("tjalling.hattink@ti-wmc.nl"); -MODULE_DESCRIPTION("Mikrotik RB500 LED driver"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/rb532/files-2.6.24/drivers/net/korina.c b/target/linux/rb532/files-2.6.24/drivers/net/korina.c deleted file mode 100644 index 96b2ffe0e..000000000 --- a/target/linux/rb532/files-2.6.24/drivers/net/korina.c +++ /dev/null @@ -1,1118 +0,0 @@ -/************************************************************************** - * - * BRIEF MODULE DESCRIPTION - * Driver for the IDT RC32434 on-chip ethernet controller. - * - * Copyright 2004 IDT Inc. (rischelp@idt.com) - * Copyright 2006 Felix Fietkau <nbd@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - ************************************************************************** - * May 2004 rkt, neb - * - * Based on the driver developed by B. Maruthanayakam, H. Kou and others. - * - * Aug 2004 Sadik - * - * Added NAPI - * - ************************************************************************** - */ - -#include <linux/autoconf.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/moduleparam.h> -#include <linux/sched.h> -#include <linux/ctype.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ptrace.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/proc_fs.h> -#include <linux/in.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/errno.h> -#include <linux/platform_device.h> -#include <asm/bootinfo.h> -#include <asm/system.h> -#include <asm/bitops.h> -#include <asm/pgtable.h> -#include <asm/segment.h> -#include <asm/io.h> -#include <asm/dma.h> - -#include <asm/rc32434/rb.h> -#include "rc32434_eth.h" - -#define DRIVER_VERSION "(mar2904)" - -#define DRIVER_NAME "rc32434 Ethernet driver. " DRIVER_VERSION - -#define STATION_ADDRESS_HIGH(dev) (((dev)->dev_addr[0] << 8) | \ - ((dev)->dev_addr[1])) -#define STATION_ADDRESS_LOW(dev) (((dev)->dev_addr[2] << 24) | \ - ((dev)->dev_addr[3] << 16) | \ - ((dev)->dev_addr[4] << 8) | \ - ((dev)->dev_addr[5])) - -#define MII_CLOCK 1250000 /* no more than 2.5MHz */ -#define CONFIG_IDT_USE_NAPI 1 - - -static inline void rc32434_abort_tx(struct net_device *dev) -{ - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - rc32434_abort_dma(dev, lp->tx_dma_regs); - -} - -static inline void rc32434_abort_rx(struct net_device *dev) -{ - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - rc32434_abort_dma(dev, lp->rx_dma_regs); - -} - -static inline void rc32434_start_tx(struct rc32434_local *lp, volatile DMAD_t td) -{ - rc32434_start_dma(lp->tx_dma_regs, CPHYSADDR(td)); -} - -static inline void rc32434_start_rx(struct rc32434_local *lp, volatile DMAD_t rd) -{ - rc32434_start_dma(lp->rx_dma_regs, CPHYSADDR(rd)); -} - -static inline void rc32434_chain_tx(struct rc32434_local *lp, volatile DMAD_t td) -{ - rc32434_chain_dma(lp->tx_dma_regs, CPHYSADDR(td)); -} - -static inline void rc32434_chain_rx(struct rc32434_local *lp, volatile DMAD_t rd) -{ - rc32434_chain_dma(lp->rx_dma_regs, CPHYSADDR(rd)); -} - -#ifdef RC32434_PROC_DEBUG -static int rc32434_read_proc(char *buf, char **start, off_t fpos, - int length, int *eof, void *data) -{ - struct net_device *dev = (struct net_device *)data; - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - int len = 0; - - /* print out header */ - len += sprintf(buf + len, "\n\tKorina Ethernet Debug\n\n"); - len += sprintf (buf + len, - "DMA halt count = %10d, DMA run count = %10d\n", - lp->dma_halt_cnt, lp->dma_run_cnt); - - if (fpos >= len) { - *start = buf; - *eof = 1; - return 0; - } - *start = buf + fpos; - - if ((len -= fpos) > length) - return length; - *eof = 1; - - return len; - -} -#endif - - -/* - * Restart the RC32434 ethernet controller. - */ -static int rc32434_restart(struct net_device *dev) -{ - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - - /* - * Disable interrupts - */ - disable_irq(lp->rx_irq); - disable_irq(lp->tx_irq); -#ifdef RC32434_REVISION - disable_irq(lp->ovr_irq); -#endif - disable_irq(lp->und_irq); - - /* Mask F E bit in Tx DMA */ - __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) | DMASM_f_m | DMASM_e_m, &lp->tx_dma_regs->dmasm); - /* Mask D H E bit in Rx DMA */ - __raw_writel(__raw_readl(&lp->rx_dma_regs->dmasm) | DMASM_d_m | DMASM_h_m | DMASM_e_m, &lp->rx_dma_regs->dmasm); - - rc32434_init(dev); - rc32434_multicast_list(dev); - - enable_irq(lp->und_irq); -#ifdef RC32434_REVISION - enable_irq(lp->ovr_irq); -#endif - enable_irq(lp->tx_irq); - enable_irq(lp->rx_irq); - - return 0; -} - -static int rc32434_probe(struct platform_device *pdev) -{ - struct korina_device *bif = (struct korina_device *) pdev->dev.platform_data; - struct rc32434_local *lp = NULL; - struct net_device *dev = NULL; - struct resource *r; - int i, retval,err; - - dev = alloc_etherdev(sizeof(struct rc32434_local)); - if(!dev) { - ERR("Korina_eth: alloc_etherdev failed\n"); - return -1; - } - - platform_set_drvdata(pdev, dev); - SET_NETDEV_DEV(dev, &pdev->dev); - bif->dev = dev; - - memcpy(dev->dev_addr, bif->mac, 6); - - /* Initialize the device structure. */ - if (dev->priv == NULL) { - lp = (struct rc32434_local *)kmalloc(sizeof(*lp), GFP_KERNEL); - memset(lp, 0, sizeof(struct rc32434_local)); - } - else { - lp = (struct rc32434_local *)dev->priv; - } - - lp->rx_irq = platform_get_irq_byname(pdev, "korina_rx"); - lp->tx_irq = platform_get_irq_byname(pdev, "korina_tx"); - lp->ovr_irq = platform_get_irq_byname(pdev, "korina_ovr"); - lp->und_irq = platform_get_irq_byname(pdev, "korina_und"); - - r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_regs"); - dev->base_addr = r->start; - lp->eth_regs = ioremap_nocache(r->start, r->end - r->start); - if (!lp->eth_regs) { - ERR("Can't remap eth registers\n"); - retval = -ENXIO; - goto probe_err_out; - } - - r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_rx"); - lp->rx_dma_regs = ioremap_nocache(r->start, r->end - r->start); - if (!lp->rx_dma_regs) { - ERR("Can't remap Rx DMA registers\n"); - retval = -ENXIO; - goto probe_err_out; - } - - r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_tx"); - lp->tx_dma_regs = ioremap_nocache(r->start, r->end - r->start); - if (!lp->tx_dma_regs) { - ERR("Can't remap Tx DMA registers\n"); - retval = -ENXIO; - goto probe_err_out; - } - -#ifdef RC32434_PROC_DEBUG - lp->ps = create_proc_read_entry (bif->name, 0, proc_net, - rc32434_read_proc, dev); -#endif - - lp->td_ring = (DMAD_t)kmalloc(TD_RING_SIZE + RD_RING_SIZE, GFP_KERNEL); - if (!lp->td_ring) { - ERR("Can't allocate descriptors\n"); - retval = -ENOMEM; - goto probe_err_out; - } - - dma_cache_inv((unsigned long)(lp->td_ring), TD_RING_SIZE + RD_RING_SIZE); - - /* now convert TD_RING pointer to KSEG1 */ - lp->td_ring = (DMAD_t )KSEG1ADDR(lp->td_ring); - lp->rd_ring = &lp->td_ring[RC32434_NUM_TDS]; - - - spin_lock_init(&lp->lock); - - /* just use the rx dma irq */ - dev->irq = lp->rx_irq; - - dev->priv = lp; - lp->dev = dev; - - dev->open = rc32434_open; - dev->stop = rc32434_close; - dev->hard_start_xmit = rc32434_send_packet; - dev->get_stats = rc32434_get_stats; - dev->set_multicast_list = &rc32434_multicast_list; - dev->tx_timeout = rc32434_tx_timeout; - dev->watchdog_timeo = RC32434_TX_TIMEOUT; - - netif_napi_add(dev, &lp->napi, rc32434_poll, 64); - lp->tx_tasklet = kmalloc(sizeof(struct tasklet_struct), GFP_KERNEL); - tasklet_init(lp->tx_tasklet, rc32434_tx_tasklet, (unsigned long)dev); - - if ((err = register_netdev(dev))) { - printk(KERN_ERR "rc32434 ethernet. Cannot register net device %d\n", err); - free_netdev(dev); - retval = -EINVAL; - goto probe_err_out; - } - - INFO("Rx IRQ %d, Tx IRQ %d, ", lp->rx_irq, lp->tx_irq); - for (i = 0; i < 6; i++) { - printk("%2.2x", dev->dev_addr[i]); - if (i<5) - printk(":"); - } - printk("\n"); - - return 0; - - probe_err_out: - rc32434_cleanup_module(); - ERR(" failed. Returns %d\n", retval); - return retval; - -} - -static int rc32434_remove(struct platform_device *pdev) -{ - struct korina_device *bif = (struct korina_device *) pdev->dev.platform_data; - - if (bif->dev != NULL) { - struct rc32434_local *lp = (struct rc32434_local *)bif->dev->priv; - if (lp != NULL) { - if (lp->eth_regs) - iounmap((void*)lp->eth_regs); - if (lp->rx_dma_regs) - iounmap((void*)lp->rx_dma_regs); - if (lp->tx_dma_regs) - iounmap((void*)lp->tx_dma_regs); - if (lp->td_ring) - kfree((void*)KSEG0ADDR(lp->td_ring)); - -#ifdef RC32434_PROC_DEBUG - if (lp->ps) { - remove_proc_entry(bif->name, proc_net); - } -#endif - kfree(lp); - } - - platform_set_drvdata(pdev, NULL); - unregister_netdev(bif->dev); - free_netdev(bif->dev); - kfree(bif->dev); - } - return 0; -} - - -static int rc32434_open(struct net_device *dev) -{ - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - - /* Initialize */ - if (rc32434_init(dev)) { - ERR("Error: cannot open the Ethernet device\n"); - return -EAGAIN; - } - - /* Install the interrupt handler that handles the Done Finished Ovr and Und Events */ - if (request_irq(lp->rx_irq, &rc32434_rx_dma_interrupt, - IRQF_SHARED | IRQF_DISABLED, - "Korina ethernet Rx", dev)) { - ERR(": unable to get Rx DMA IRQ %d\n", - lp->rx_irq); - return -EAGAIN; - } - if (request_irq(lp->tx_irq, &rc32434_tx_dma_interrupt, - IRQF_SHARED | IRQF_DISABLED, - "Korina ethernet Tx", dev)) { - ERR(": unable to get Tx DMA IRQ %d\n", - lp->tx_irq); - free_irq(lp->rx_irq, dev); - return -EAGAIN; - } - -#ifdef RC32434_REVISION - /* Install handler for overrun error. */ - if (request_irq(lp->ovr_irq, &rc32434_ovr_interrupt, - IRQF_SHARED | IRQF_DISABLED, - "Ethernet Overflow", dev)) { - ERR(": unable to get OVR IRQ %d\n", - lp->ovr_irq); - free_irq(lp->rx_irq, dev); - free_irq(lp->tx_irq, dev); - return -EAGAIN; - } -#endif - - /* Install handler for underflow error. */ - if (request_irq(lp->und_irq, &rc32434_und_interrupt, - IRQF_SHARED | IRQF_DISABLED, - "Ethernet Underflow", dev)) { - ERR(": unable to get UND IRQ %d\n", - lp->und_irq); - free_irq(lp->rx_irq, dev); - free_irq(lp->tx_irq, dev); -#ifdef RC32434_REVISION - free_irq(lp->ovr_irq, dev); -#endif - return -EAGAIN; - } - - - return 0; -} - - - - -static int rc32434_close(struct net_device *dev) -{ - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - u32 tmp; - - /* Disable interrupts */ - disable_irq(lp->rx_irq); - disable_irq(lp->tx_irq); -#ifdef RC32434_REVISION - disable_irq(lp->ovr_irq); -#endif - disable_irq(lp->und_irq); - - tmp = __raw_readl(&lp->tx_dma_regs->dmasm); - tmp = tmp | DMASM_f_m | DMASM_e_m; - __raw_writel(tmp, &lp->tx_dma_regs->dmasm); - - tmp = __raw_readl(&lp->rx_dma_regs->dmasm); - tmp = tmp | DMASM_d_m | DMASM_h_m | DMASM_e_m; - __raw_writel(tmp, &lp->rx_dma_regs->dmasm); - - free_irq(lp->rx_irq, dev); - free_irq(lp->tx_irq, dev); -#ifdef RC32434_REVISION - free_irq(lp->ovr_irq, dev); -#endif - free_irq(lp->und_irq, dev); - return 0; -} - - -/* transmit packet */ -static int rc32434_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - unsigned long flags; - u32 length; - DMAD_t td; - - - spin_lock_irqsave(&lp->lock, flags); - - td = &lp->td_ring[lp->tx_chain_tail]; - - /* stop queue when full, drop pkts if queue already full */ - if(lp->tx_count >= (RC32434_NUM_TDS - 2)) { - lp->tx_full = 1; - - if(lp->tx_count == (RC32434_NUM_TDS - 2)) { - netif_stop_queue(dev); - } - else { - lp->stats.tx_dropped++; - dev_kfree_skb_any(skb); - spin_unlock_irqrestore(&lp->lock, flags); - return 1; - } - } - - lp->tx_count ++; - - lp->tx_skb[lp->tx_chain_tail] = skb; - - length = skb->len; - dma_cache_wback((u32)skb->data, skb->len); - - /* Setup the transmit descriptor. */ - dma_cache_inv((u32) td, sizeof(*td)); - td->ca = CPHYSADDR(skb->data); - - if(__raw_readl(&(lp->tx_dma_regs->dmandptr)) == 0) { - if( lp->tx_chain_status == empty ) { - td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */ - lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ - __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); /* Write to NDPTR */ - lp->tx_chain_head = lp->tx_chain_tail; /* Move head to tail */ - } - else { - td->control = DMA_COUNT(length) |DMAD_cof_m|DMAD_iof_m; /* Update tail */ - lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].control &= ~(DMAD_cof_m); /* Link to prev */ - lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].link = CPHYSADDR(td); /* Link to prev */ - lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ - __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); /* Write to NDPTR */ - lp->tx_chain_head = lp->tx_chain_tail; /* Move head to tail */ - lp->tx_chain_status = empty; - } - } - else { - if( lp->tx_chain_status == empty ) { - td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */ - lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ - lp->tx_chain_status = filled; - } - else { - td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */ - lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].control &= ~(DMAD_cof_m); /* Link to prev */ - lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].link = CPHYSADDR(td); /* Link to prev */ - lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ - } - } - dma_cache_wback((u32) td, sizeof(*td)); - - dev->trans_start = jiffies; - - spin_unlock_irqrestore(&lp->lock, flags); - - return 0; -} - - -/* Ethernet MII-PHY Handler */ -static void rc32434_mii_handler(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - unsigned long flags; - unsigned long duplex_status; - int port_addr = (lp->rx_irq == 0x2c? 1:0) << 8; - - spin_lock_irqsave(&lp->lock, flags); - - /* Two ports are using the same MII, the difference is the PHY address */ - __raw_writel(0, &rc32434_eth0_regs->miimcfg); - __raw_writel(0, &rc32434_eth0_regs->miimcmd); - __raw_writel(port_addr |0x05, &rc32434_eth0_regs->miimaddr); - __raw_writel(MIIMCMD_scn_m, &rc32434_eth0_regs->miimcmd); - while(__raw_readl(&rc32434_eth0_regs->miimind) & MIIMIND_nv_m); - - ERR("irq:%x port_addr:%x RDD:%x\n", - lp->rx_irq, port_addr, __raw_readl(&rc32434_eth0_regs->miimrdd)); - duplex_status = (__raw_readl(&rc32434_eth0_regs->miimrdd) & 0x140)? ETHMAC2_fd_m: 0; - if(duplex_status != lp->duplex_mode) { - ERR("The MII-PHY is Auto-negotiated to %s-Duplex mode for Eth-%x\n", duplex_status? "Full":"Half", lp->rx_irq == 0x2c? 1:0); - lp->duplex_mode = duplex_status; - rc32434_restart(dev); - } - - lp->mii_phy_timer.expires = jiffies + 10 * HZ; - add_timer(&lp->mii_phy_timer); - - spin_unlock_irqrestore(&lp->lock, flags); - -} - -#ifdef RC32434_REVISION -/* Ethernet Rx Overflow interrupt */ -static irqreturn_t -rc32434_ovr_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct rc32434_local *lp; - unsigned int ovr; - irqreturn_t retval = IRQ_NONE; - - ASSERT(dev != NULL); - - lp = (struct rc32434_local *)dev->priv; - spin_lock(&lp->lock); - ovr = __raw_readl(&lp->eth_regs->ethintfc); - - if(ovr & ETHINTFC_ovr_m) { - netif_stop_queue(dev); - - /* clear OVR bit */ - __raw_writel((ovr & ~ETHINTFC_ovr_m), &lp->eth_regs->ethintfc); - - /* Restart interface */ - rc32434_restart(dev); - retval = IRQ_HANDLED; - } - spin_unlock(&lp->lock); - - return retval; -} - -#endif - - -/* Ethernet Tx Underflow interrupt */ -static irqreturn_t -rc32434_und_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct rc32434_local *lp; - unsigned int und; - irqreturn_t retval = IRQ_NONE; - - ASSERT(dev != NULL); - - lp = (struct rc32434_local *)dev->priv; - - spin_lock(&lp->lock); - - und = __raw_readl(&lp->eth_regs->ethintfc); - - if(und & ETHINTFC_und_m) { - netif_stop_queue(dev); - - __raw_writel((und & ~ETHINTFC_und_m), &lp->eth_regs->ethintfc); - - /* Restart interface */ - rc32434_restart(dev); - retval = IRQ_HANDLED; - } - - spin_unlock(&lp->lock); - - return retval; -} - - -/* Ethernet Rx DMA interrupt */ -static irqreturn_t -rc32434_rx_dma_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct rc32434_local* lp; - volatile u32 dmas,dmasm; - irqreturn_t retval; - - ASSERT(dev != NULL); - - lp = (struct rc32434_local *)dev->priv; - - dmas = __raw_readl(&lp->rx_dma_regs->dmas); - if(dmas & (DMAS_d_m|DMAS_h_m|DMAS_e_m)) { - /* Mask D H E bit in Rx DMA */ - dmasm = __raw_readl(&lp->rx_dma_regs->dmasm); - __raw_writel(dmasm | (DMASM_d_m | DMASM_h_m | DMASM_e_m), &lp->rx_dma_regs->dmasm); - netif_rx_schedule(dev, &lp->napi); - - if (dmas & DMAS_e_m) - ERR(": DMA error\n"); - - retval = IRQ_HANDLED; - } - else - retval = IRQ_NONE; - - return retval; -} - - -static int rc32434_rx(struct net_device *dev, int limit) -{ - struct rc32434_local *lp = netdev_priv(dev); - volatile DMAD_t rd = &lp->rd_ring[lp->rx_next_done]; - struct sk_buff *skb, *skb_new; - u8 *pkt_buf; - u32 devcs, pkt_len, dmas, rx_free_desc; - u32 pktuncrc_len; - int count; - - dma_cache_inv((u32)rd, sizeof(*rd)); - for (count = 0; count < limit; count++) { - /* init the var. used for the later operations within the while loop */ - skb_new = NULL; - devcs = rd->devcs; - pkt_len = RCVPKT_LENGTH(devcs); - skb = lp->rx_skb[lp->rx_next_done]; - - if ((devcs & ( ETHRX_ld_m)) != ETHRX_ld_m) { - /* check that this is a whole packet */ - /* WARNING: DMA_FD bit incorrectly set in Rc32434 (errata ref #077) */ - lp->stats.rx_errors++; - lp->stats.rx_dropped++; - } - else if ( (devcs & ETHRX_rok_m) ) { - - /* must be the (first and) last descriptor then */ - pkt_buf = (u8*)lp->rx_skb[lp->rx_next_done]->data; - - pktuncrc_len = pkt_len - 4; - /* invalidate the cache */ - dma_cache_inv((unsigned long)pkt_buf, pktuncrc_len); - - /* Malloc up new buffer. */ - skb_new = netdev_alloc_skb(dev, RC32434_RBSIZE + 2); - - if (skb_new != NULL){ - /* Make room */ - skb_put(skb, pktuncrc_len); - - skb->protocol = eth_type_trans(skb, dev); - - /* pass the packet to upper layers */ - netif_receive_skb(skb); - - dev->last_rx = jiffies; - lp->stats.rx_packets++; - lp->stats.rx_bytes += pktuncrc_len; - - if (IS_RCV_MP(devcs)) - lp->stats.multicast++; - - /* 16 bit align */ - skb_reserve(skb_new, 2); - - skb_new->dev = dev; - lp->rx_skb[lp->rx_next_done] = skb_new; - } - else { - ERR("no memory, dropping rx packet.\n"); - lp->stats.rx_errors++; - lp->stats.rx_dropped++; - } - } - else { - /* This should only happen if we enable accepting broken packets */ - lp->stats.rx_errors++; - lp->stats.rx_dropped++; - - /* add statistics counters */ - if (IS_RCV_CRC_ERR(devcs)) { - DBG(2, "RX CRC error\n"); - lp->stats.rx_crc_errors++; - } - else if (IS_RCV_LOR_ERR(devcs)) { - DBG(2, "RX LOR error\n"); - lp->stats.rx_length_errors++; - } - else if (IS_RCV_LE_ERR(devcs)) { - DBG(2, "RX LE error\n"); - lp->stats.rx_length_errors++; - } - else if (IS_RCV_OVR_ERR(devcs)) { - lp->stats.rx_over_errors++; - } - else if (IS_RCV_CV_ERR(devcs)) { - /* code violation */ - DBG(2, "RX CV error\n"); - lp->stats.rx_frame_errors++; - } - else if (IS_RCV_CES_ERR(devcs)) { - DBG(2, "RX Preamble error\n"); - } - } - rd->devcs = 0; - - /* restore descriptor's curr_addr */ - if(skb_new) { - rd->ca = CPHYSADDR(skb_new->data); - } - else - rd->ca = CPHYSADDR(skb->data); - - rd->control = DMA_COUNT(RC32434_RBSIZE) |DMAD_cod_m |DMAD_iod_m; - lp->rd_ring[(lp->rx_next_done-1)& RC32434_RDS_MASK].control &= ~(DMAD_cod_m); - - lp->rx_next_done = (lp->rx_next_done + 1) & RC32434_RDS_MASK; - dma_cache_wback((u32)rd, sizeof(*rd)); - rd = &lp->rd_ring[lp->rx_next_done]; - __raw_writel( ~DMAS_d_m, &lp->rx_dma_regs->dmas); - } - - dmas = __raw_readl(&lp->rx_dma_regs->dmas); - - if(dmas & DMAS_h_m) { - /* Mask off halt and error bits */ - __raw_writel( ~(DMAS_h_m | DMAS_e_m), &lp->rx_dma_regs->dmas); -#ifdef RC32434_PROC_DEBUG - lp->dma_halt_cnt++; -#endif - rd->devcs = 0; - skb = lp->rx_skb[lp->rx_next_done]; - rd->ca = CPHYSADDR(skb->data); - dma_cache_wback((u32)rd, sizeof(*rd)); - rc32434_chain_rx(lp,rd); - } - - return count; -} - -static int rc32434_poll(struct napi_struct *napi, int budget) -{ - struct rc32434_local *lp = - container_of(napi, struct rc32434_local, napi); - struct net_device *dev = lp->dev; - int work_done; - - work_done = rc32434_rx(dev, budget); - if (work_done < budget) { - netif_rx_complete(dev, napi); - - /* Mask off interrupts */ - writel(readl(&lp->rx_dma_regs->dmasm) & - (DMASM_d_m | DMASM_h_m |DMASM_e_m), - &lp->rx_dma_regs->dmasm); - } - return work_done; -} - - - -/* Ethernet Tx DMA interrupt */ -static irqreturn_t -rc32434_tx_dma_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct rc32434_local *lp; - volatile u32 dmas,dmasm; - irqreturn_t retval; - - ASSERT(dev != NULL); - - lp = (struct rc32434_local *)dev->priv; - - dmas = __raw_readl(&lp->tx_dma_regs->dmas); - - if (dmas & (DMAS_f_m | DMAS_e_m)) { - dmasm = __raw_readl(&lp->tx_dma_regs->dmasm); - /* Mask F E bit in Tx DMA */ - __raw_writel(dmasm | (DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); - - tasklet_hi_schedule(lp->tx_tasklet); - - if(lp->tx_chain_status == filled && (__raw_readl(&(lp->tx_dma_regs->dmandptr)) == 0)) { - __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); - lp->tx_chain_status = empty; - lp->tx_chain_head = lp->tx_chain_tail; - dev->trans_start = jiffies; - } - - if (dmas & DMAS_e_m) - ERR(": DMA error\n"); - - retval = IRQ_HANDLED; - } - else - retval = IRQ_NONE; - - return retval; -} - - -static void rc32434_tx_tasklet(unsigned long tx_data_dev) -{ - struct net_device *dev = (struct net_device *)tx_data_dev; - struct rc32434_local* lp = (struct rc32434_local *)dev->priv; - volatile DMAD_t td = &lp->td_ring[lp->tx_next_done]; - u32 devcs; - unsigned long flags; - volatile u32 dmas; - - spin_lock_irqsave(&lp->lock, flags); - - /* process all desc that are done */ - while(IS_DMA_FINISHED(td->control)) { - if(lp->tx_full == 1) { - netif_wake_queue(dev); - lp->tx_full = 0; - } - - devcs = lp->td_ring[lp->tx_next_done].devcs; - if ((devcs & (ETHTX_fd_m | ETHTX_ld_m)) != (ETHTX_fd_m | ETHTX_ld_m)) { - lp->stats.tx_errors++; - lp->stats.tx_dropped++; - - /* should never happen */ - DBG(1, __FUNCTION__ ": split tx ignored\n"); - } - else if (IS_TX_TOK(devcs)) { - lp->stats.tx_packets++; - lp->stats.tx_bytes+=lp->tx_skb[lp->tx_next_done]->len; - } - else { - lp->stats.tx_errors++; - lp->stats.tx_dropped++; - - /* underflow */ - if (IS_TX_UND_ERR(devcs)) - lp->stats.tx_fifo_errors++; - - /* oversized frame */ - if (IS_TX_OF_ERR(devcs)) - lp->stats.tx_aborted_errors++; - - /* excessive deferrals */ - if (IS_TX_ED_ERR(devcs)) - lp->stats.tx_carrier_errors++; - - /* collisions: medium busy */ - if (IS_TX_EC_ERR(devcs)) - lp->stats.collisions++; - - /* late collision */ - if (IS_TX_LC_ERR(devcs)) - lp->stats.tx_window_errors++; - - } - - /* We must always free the original skb */ - if (lp->tx_skb[lp->tx_next_done] != NULL) { - dev_kfree_skb_any(lp->tx_skb[lp->tx_next_done]); - lp->tx_skb[lp->tx_next_done] = NULL; - } - - lp->td_ring[lp->tx_next_done].control = DMAD_iof_m; - lp->td_ring[lp->tx_next_done].devcs = ETHTX_fd_m | ETHTX_ld_m; - lp->td_ring[lp->tx_next_done].link = 0; - lp->td_ring[lp->tx_next_done].ca = 0; - lp->tx_count --; - - /* go on to next transmission */ - lp->tx_next_done = (lp->tx_next_done + 1) & RC32434_TDS_MASK; - td = &lp->td_ring[lp->tx_next_done]; - - } - - dmas = __raw_readl(&lp->tx_dma_regs->dmas); - __raw_writel( ~dmas, &lp->tx_dma_regs->dmas); - - /* Enable F E bit in Tx DMA */ - __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) & ~(DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); - spin_unlock_irqrestore(&lp->lock, flags); - -} - - -static struct net_device_stats * rc32434_get_stats(struct net_device *dev) -{ - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - return &lp->stats; -} - - -/* - * Set or clear the multicast filter for this adaptor. - */ -static void rc32434_multicast_list(struct net_device *dev) -{ - /* listen to broadcasts always and to treat */ - /* IFF bits independantly */ - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - unsigned long flags; - u32 recognise = ETHARC_ab_m; /* always accept broadcasts */ - - if (dev->flags & IFF_PROMISC) /* set promiscuous mode */ - recognise |= ETHARC_pro_m; - - if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) - recognise |= ETHARC_am_m; /* all multicast & bcast */ - else if (dev->mc_count > 0) { - DBG(2, __FUNCTION__ ": mc_count %d\n", dev->mc_count); - recognise |= ETHARC_am_m; /* for the time being */ - } - - spin_lock_irqsave(&lp->lock, flags); - __raw_writel(recognise, &lp->eth_regs->etharc); - spin_unlock_irqrestore(&lp->lock, flags); -} - - -static void rc32434_tx_timeout(struct net_device *dev) -{ - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - unsigned long flags; - - spin_lock_irqsave(&lp->lock, flags); - rc32434_restart(dev); - spin_unlock_irqrestore(&lp->lock, flags); - -} - - -/* - * Initialize the RC32434 ethernet controller. - */ -static int rc32434_init(struct net_device *dev) -{ - struct rc32434_local *lp = (struct rc32434_local *)dev->priv; - int i, j; - - /* Disable DMA */ - rc32434_abort_tx(dev); - rc32434_abort_rx(dev); - - /* reset ethernet logic */ - __raw_writel(0, &lp->eth_regs->ethintfc); - while((__raw_readl(&lp->eth_regs->ethintfc) & ETHINTFC_rip_m)) - dev->trans_start = jiffies; - - /* Enable Ethernet Interface */ - __raw_writel(ETHINTFC_en_m, &lp->eth_regs->ethintfc); - - tasklet_disable(lp->tx_tasklet); - - /* Initialize the transmit Descriptors */ - for (i = 0; i < RC32434_NUM_TDS; i++) { - lp->td_ring[i].control = DMAD_iof_m; - lp->td_ring[i].devcs = ETHTX_fd_m | ETHTX_ld_m; - lp->td_ring[i].ca = 0; - lp->td_ring[i].link = 0; - if (lp->tx_skb[i] != NULL) { - dev_kfree_skb_any(lp->tx_skb[i]); - lp->tx_skb[i] = NULL; - } - } - lp->tx_next_done = lp->tx_chain_head = lp->tx_chain_tail = lp->tx_full = lp->tx_count = 0; - lp-> tx_chain_status = empty; - - /* - * Initialize the receive descriptors so that they - * become a circular linked list, ie. let the last - * descriptor point to the first again. - */ - for (i=0; i<RC32434_NUM_RDS; i++) { - struct sk_buff *skb = lp->rx_skb[i]; - - if (lp->rx_skb[i] == NULL) { - skb = dev_alloc_skb(RC32434_RBSIZE + 2); - if (skb == NULL) { - ERR("No memory in the system\n"); - for (j = 0; j < RC32434_NUM_RDS; j ++) - if (lp->rx_skb[j] != NULL) - dev_kfree_skb_any(lp->rx_skb[j]); - - return 1; - } - else { - skb->dev = dev; - skb_reserve(skb, 2); - lp->rx_skb[i] = skb; - lp->rd_ring[i].ca = CPHYSADDR(skb->data); - - } - } - lp->rd_ring[i].control = DMAD_iod_m | DMA_COUNT(RC32434_RBSIZE); - lp->rd_ring[i].devcs = 0; - lp->rd_ring[i].ca = CPHYSADDR(skb->data); - lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]); - - } - /* loop back */ - lp->rd_ring[RC32434_NUM_RDS-1].link = CPHYSADDR(&lp->rd_ring[0]); - lp->rx_next_done = 0; - - lp->rd_ring[RC32434_NUM_RDS-1].control |= DMAD_cod_m; - lp->rx_chain_head = 0; - lp->rx_chain_tail = 0; - lp->rx_chain_status = empty; - - __raw_writel(0, &lp->rx_dma_regs->dmas); - /* Start Rx DMA */ - rc32434_start_rx(lp, &lp->rd_ring[0]); - - /* Enable F E bit in Tx DMA */ - __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) & ~(DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); - /* Enable D H E bit in Rx DMA */ - __raw_writel(__raw_readl(&lp->rx_dma_regs->dmasm) & ~(DMASM_d_m | DMASM_h_m | DMASM_e_m), &lp->rx_dma_regs->dmasm); - - /* Accept only packets destined for this Ethernet device address */ - __raw_writel(ETHARC_ab_m, &lp->eth_regs->etharc); - - /* Set all Ether station address registers to their initial values */ - __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal0); - __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah0); - - __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal1); - __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah1); - - __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal2); - __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah2); - - __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal3); - __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah3); - - - /* Frame Length Checking, Pad Enable, CRC Enable, Full Duplex set */ - __raw_writel(ETHMAC2_pe_m | ETHMAC2_cen_m | ETHMAC2_fd_m, &lp->eth_regs->ethmac2); - //ETHMAC2_flc_m ETHMAC2_fd_m lp->duplex_mode - - /* Back to back inter-packet-gap */ - __raw_writel(0x15, &lp->eth_regs->ethipgt); - /* Non - Back to back inter-packet-gap */ - __raw_writel(0x12, &lp->eth_regs->ethipgr); - - /* Management Clock Prescaler Divisor */ - /* Clock independent setting */ - __raw_writel(((idt_cpu_freq)/MII_CLOCK+1) & ~1, - &lp->eth_regs->ethmcp); - - /* don't transmit until fifo contains 48b */ - __raw_writel(48, &lp->eth_regs->ethfifott); - - __raw_writel(ETHMAC1_re_m, &lp->eth_regs->ethmac1); - - napi_enable(&lp->napi); - tasklet_enable(lp->tx_tasklet); - - netif_start_queue(dev); - - return 0; -} - -static struct platform_driver korina_driver = { - .driver.name = "korina", - .probe = rc32434_probe, - .remove = rc32434_remove, -}; - -static int __init rc32434_init_module(void) -{ - return platform_driver_register(&korina_driver); -} - -static void rc32434_cleanup_module(void) -{ - return platform_driver_unregister(&korina_driver); -} - -module_init(rc32434_init_module); -module_exit(rc32434_cleanup_module); diff --git a/target/linux/rb532/files-2.6.24/drivers/net/rc32434_eth.h b/target/linux/rb532/files-2.6.24/drivers/net/rc32434_eth.h deleted file mode 100644 index 5ac6dc354..000000000 --- a/target/linux/rb532/files-2.6.24/drivers/net/rc32434_eth.h +++ /dev/null @@ -1,173 +0,0 @@ -/************************************************************************** - * - * BRIEF MODULE DESCRIPTION - * Definitions for IDT RC32434 on-chip ethernet controller. - * - * Copyright 2004 IDT Inc. (rischelp@idt.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - ************************************************************************** - * May 2004 rkt, neb - * - * Initial Release - * - * Aug 2004 - * - * Added NAPI - * - ************************************************************************** - */ - - -#include <asm/rc32434/rc32434.h> -#include <asm/rc32434/dma_v.h> -#include <asm/rc32434/eth_v.h> - -#define CONFIG_IDT_USE_NAPI 1 -#define RC32434_DEBUG 2 -//#define RC32434_PROC_DEBUG -#undef RC32434_DEBUG - -#ifdef RC32434_DEBUG - -/* use 0 for production, 1 for verification, >2 for debug */ -static int rc32434_debug = RC32434_DEBUG; -#define ASSERT(expr) \ - if(!(expr)) { \ - printk( "Assertion failed! %s,%s,%s,line=%d\n", \ - #expr,__FILE__,__FUNCTION__,__LINE__); } -#define DBG(lvl, format, arg...) if (rc32434_debug > lvl) printk(KERN_INFO "%s: " format, dev->name , ## arg) -#else -#define ASSERT(expr) do {} while (0) -#define DBG(lvl, format, arg...) do {} while (0) -#endif - -#define INFO(format, arg...) printk(KERN_INFO "%s: " format, dev->name , ## arg) -#define ERR(format, arg...) printk(KERN_ERR "%s: " format, dev->name , ## arg) -#define WARN(format, arg...) printk(KERN_WARNING "%s: " format, dev->name , ## arg) - -/* the following must be powers of two */ -#ifdef CONFIG_IDT_USE_NAPI -#define RC32434_NUM_RDS 64 /* number of receive descriptors */ -#define RC32434_NUM_TDS 64 /* number of transmit descriptors */ -#else -#define RC32434_NUM_RDS 128 /* number of receive descriptors */ -#define RC32434_NUM_TDS 128 /* number of transmit descriptors */ -#endif - -#define RC32434_RBSIZE 1536 /* size of one resource buffer = Ether MTU */ -#define RC32434_RDS_MASK (RC32434_NUM_RDS-1) -#define RC32434_TDS_MASK (RC32434_NUM_TDS-1) -#define RD_RING_SIZE (RC32434_NUM_RDS * sizeof(struct DMAD_s)) -#define TD_RING_SIZE (RC32434_NUM_TDS * sizeof(struct DMAD_s)) - -#define RC32434_TX_TIMEOUT HZ * 100 - -#define rc32434_eth0_regs ((ETH_t)(ETH0_VirtualAddress)) -#define rc32434_eth1_regs ((ETH_t)(ETH1_VirtualAddress)) - -enum status { filled, empty}; -#define IS_DMA_FINISHED(X) (((X) & (DMAD_f_m)) != 0) -#define IS_DMA_DONE(X) (((X) & (DMAD_d_m)) != 0) - - -/* Information that need to be kept for each board. */ -struct rc32434_local { - ETH_t eth_regs; - DMA_Chan_t rx_dma_regs; - DMA_Chan_t tx_dma_regs; - volatile DMAD_t td_ring; /* transmit descriptor ring */ - volatile DMAD_t rd_ring; /* receive descriptor ring */ - - struct sk_buff* tx_skb[RC32434_NUM_TDS]; /* skbuffs for pkt to trans */ - struct sk_buff* rx_skb[RC32434_NUM_RDS]; /* skbuffs for pkt to trans */ - - struct tasklet_struct * tx_tasklet; - - int rx_next_done; - int rx_chain_head; - int rx_chain_tail; - enum status rx_chain_status; - - int tx_next_done; - int tx_chain_head; - int tx_chain_tail; - enum status tx_chain_status; - int tx_count; - int tx_full; - - struct timer_list mii_phy_timer; - unsigned long duplex_mode; - - int rx_irq; - int tx_irq; - int ovr_irq; - int und_irq; - - struct net_device_stats stats; - spinlock_t lock; - - /* debug /proc entry */ - struct proc_dir_entry *ps; - int dma_halt_cnt; int dma_run_cnt; - struct napi_struct napi; - struct net_device *dev; -}; - -extern unsigned int idt_cpu_freq; - -/* Index to functions, as function prototypes. */ -static int rc32434_open(struct net_device *dev); -static int rc32434_send_packet(struct sk_buff *skb, struct net_device *dev); -static void rc32434_mii_handler(unsigned long data); -static irqreturn_t rc32434_und_interrupt(int irq, void *dev_id); -static irqreturn_t rc32434_rx_dma_interrupt(int irq, void *dev_id); -static irqreturn_t rc32434_tx_dma_interrupt(int irq, void *dev_id); -#ifdef RC32434_REVISION -static irqreturn_t rc32434_ovr_interrupt(int irq, void *dev_id); -#endif -static int rc32434_close(struct net_device *dev); -static struct net_device_stats *rc32434_get_stats(struct net_device *dev); -static void rc32434_multicast_list(struct net_device *dev); -static int rc32434_init(struct net_device *dev); -static void rc32434_tx_timeout(struct net_device *dev); - -static void rc32434_tx_tasklet(unsigned long tx_data_dev); -static int rc32434_poll(struct napi_struct *napi, int budget); -static void rc32434_cleanup_module(void); - - -static inline void rc32434_abort_dma(struct net_device *dev, DMA_Chan_t ch) -{ - if (__raw_readl(&ch->dmac) & DMAC_run_m) { - __raw_writel(0x10, &ch->dmac); - - while (!(__raw_readl(&ch->dmas) & DMAS_h_m)) - dev->trans_start = jiffies; - - __raw_writel(0, &ch->dmas); - } - - __raw_writel(0, &ch->dmadptr); - __raw_writel(0, &ch->dmandptr); -} diff --git a/target/linux/rb532/files-2.6.24/drivers/watchdog/rc32434_wdt.c b/target/linux/rb532/files-2.6.24/drivers/watchdog/rc32434_wdt.c deleted file mode 100644 index 2266329de..000000000 --- a/target/linux/rb532/files-2.6.24/drivers/watchdog/rc32434_wdt.c +++ /dev/null @@ -1,240 +0,0 @@ -/* - * RC32434_WDT 0.01: IDT Interprise 79RC32434 watchdog driver - * Copyright (c) Ondrej Zajicek <santiago@crfreenet.org>, 2006 - * - * based on - * - * SoftDog 0.05: A Software Watchdog Device - * - * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/fs.h> -#include <linux/mm.h> -#include <linux/miscdevice.h> -#include <linux/watchdog.h> -#include <linux/reboot.h> -#include <linux/smp_lock.h> -#include <linux/init.h> -#include <asm/bootinfo.h> -#include <asm/time.h> -#include <asm/uaccess.h> -#include <asm/rc32434/integ.h> - -#define DEFAULT_TIMEOUT 15 /* (secs) Default is 15 seconds */ -#define MAX_TIMEOUT 20 -/* - * (secs) Max is 20 seconds - * (max frequency of counter is ~200 MHz, counter is 32-bit unsigned int) - */ - -#define NAME "rc32434_wdt" -#define VERSION "0.1" - -static INTEG_t rc_wdt = (INTEG_t) INTEG_VirtualAddress; - -static int expect_close = 0; -static int access = 0; -static int timeout = 0; - -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -MODULE_LICENSE("GPL"); - - -static inline void start_wdt(void) -{ - rc_wdt -> wtcount = 0; - rc_wdt -> errcs |= ERRCS_wre_m; - rc_wdt -> wtc |= WTC_en_m; -} - -static inline void stop_wdt(void) -{ - rc_wdt -> wtc &= ~WTC_en_m; - rc_wdt -> errcs &= ~ERRCS_wre_m; -} - -static inline void set_wdt(int new_timeout) -{ - u32 cmp = new_timeout * mips_hpt_frequency; - u32 state; - - timeout = new_timeout; - /* - * store and disable WTC - */ - state = rc_wdt -> wtc & WTC_en_m; - rc_wdt -> wtc &= ~WTC_en_m; - - rc_wdt -> wtcount = 0; - rc_wdt -> wtcompare = cmp; - - /* - * restore WTC - */ - rc_wdt -> wtc |= state; -} - -static inline void update_wdt(void) -{ - rc_wdt -> wtcount = 0; -} - -/* - * Allow only one person to hold it open - */ - -static int wdt_open(struct inode *inode, struct file *file) -{ - if (access) - return -EBUSY; - if (nowayout) { - __module_get(THIS_MODULE); - } - /* - * Activate timer - */ - start_wdt(); - printk(KERN_INFO NAME ": enabling watchdog timer\n"); - access = 1; - return 0; -} - -static int wdt_release(struct inode *inode, struct file *file) -{ - /* - * Shut off the timer. - * Lock it in if it's a module and we set nowayout - */ - if (expect_close && nowayout == 0) { - stop_wdt (); - printk(KERN_INFO NAME ": disabling watchdog timer\n"); - module_put(THIS_MODULE); - } else { - printk (KERN_CRIT NAME ": device closed unexpectedly. WDT will not stop!\n"); - } - access = 0; - return 0; -} - -static ssize_t wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos) -{ - /* - * Refresh the timer. - */ - if (len) { - if (!nowayout) { - size_t i; - - /* In case it was set long ago */ - expect_close = 0; - - for (i = 0; i != len; i++) { - char c; - if (get_user(c, data + i)) - return -EFAULT; - if (c == 'V') - expect_close = 1; - } - } - update_wdt (); - return len; - } - return 0; -} - -static int wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - int new_timeout; - static struct watchdog_info ident = { - .options = WDIOF_SETTIMEOUT | - WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE, - .firmware_version = 0, - .identity = "RC32434_WDT Watchdog", - }; - switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident))) - return -EFAULT; - return 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0,(int *)arg); - case WDIOC_KEEPALIVE: - update_wdt(); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_timeout, (int *)arg)) - return -EFAULT; - if (new_timeout < 1) - return -EINVAL; - if (new_timeout > MAX_TIMEOUT) - return -EINVAL; - set_wdt(new_timeout); - /* Fall */ - case WDIOC_GETTIMEOUT: - return put_user(timeout, (int *)arg); - } -} - -static struct file_operations wdt_fops = { - owner: THIS_MODULE, - llseek: no_llseek, - write: wdt_write, - ioctl: wdt_ioctl, - open: wdt_open, - release: wdt_release, -}; - -static struct miscdevice wdt_miscdev = { - minor: WATCHDOG_MINOR, - name: "watchdog", - fops: &wdt_fops, -}; - -static char banner[] __initdata = KERN_INFO NAME ": Watchdog Timer version " VERSION ", timer margin: %d sec\n"; - -static int __init watchdog_init(void) -{ - int ret; - - /* - * There should be check for RC32434 SoC - */ - if (mips_machgroup != MACH_GROUP_MIKROTIK) return -1; - - ret = misc_register(&wdt_miscdev); - - if (ret) - return ret; - - stop_wdt(); - set_wdt(DEFAULT_TIMEOUT); - - printk(banner, timeout); - - return 0; -} - -static void __exit watchdog_exit(void) -{ - misc_deregister(&wdt_miscdev); -} - -module_init(watchdog_init); -module_exit(watchdog_exit); diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/ddr.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/ddr.h deleted file mode 100644 index c990eca64..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/ddr.h +++ /dev/null @@ -1,172 +0,0 @@ -#ifndef __IDT_DDR_H__ -#define __IDT_DDR_H__ - -/******************************************************************************* - * - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * DDR register definition. - * - * - * Author : ryan.holmQVist@idt.com - * Date : 20011005 - * Update : - * $Log: ddr.h,v $ - * Revision 1.2 2002/06/06 18:34:03 astichte - * Added XXX_PhysicalAddress and XXX_VirtualAddress - * - * Revision 1.1 2002/05/29 17:33:21 sysarch - * jba File moved from vcode/include/idt/acacia - * - * - ******************************************************************************/ - -enum -{ - DDR0_PhysicalAddress = 0x18018000, - DDR_PhysicalAddress = DDR0_PhysicalAddress, // Default - - DDR0_VirtualAddress = 0xb8018000, - DDR_VirtualAddress = DDR0_VirtualAddress, // Default -} ; - -typedef struct DDR_s -{ - u32 ddrbase ; - u32 ddrmask ; - u32 res1; - u32 res2; - u32 ddrc ; - u32 ddrabase ; - u32 ddramask ; - u32 ddramap ; - u32 ddrcust; - u32 ddrrdc; - u32 ddrspare; -} volatile *DDR_t ; - -enum -{ - DDR0BASE_baseaddr_b = 16, - DDR0BASE_baseaddr_m = 0xffff0000, - - DDR0MASK_mask_b = 16, - DDR0MASK_mask_m = 0xffff0000, - - DDR1BASE_baseaddr_b = 16, - DDR1BASE_baseaddr_m = 0xffff0000, - - DDR1MASK_mask_b = 16, - DDR1MASK_mask_m = 0xffff0000, - - DDRC_ata_b = 5, - DDRC_ata_m = 0x000000E0, - DDRC_dbw_b = 8, - DDRC_dbw_m = 0x00000100, - DDRC_wr_b = 9, - DDRC_wr_m = 0x00000600, - DDRC_ps_b = 11, - DDRC_ps_m = 0x00001800, - DDRC_dtype_b = 13, - DDRC_dtype_m = 0x0000e000, - DDRC_rfc_b = 16, - DDRC_rfc_m = 0x000f0000, - DDRC_rp_b = 20, - DDRC_rp_m = 0x00300000, - DDRC_ap_b = 22, - DDRC_ap_m = 0x00400000, - DDRC_rcd_b = 23, - DDRC_rcd_m = 0x01800000, - DDRC_cl_b = 25, - DDRC_cl_m = 0x06000000, - DDRC_dbm_b = 27, - DDRC_dbm_m = 0x08000000, - DDRC_sds_b = 28, - DDRC_sds_m = 0x10000000, - DDRC_atp_b = 29, - DDRC_atp_m = 0x60000000, - DDRC_re_b = 31, - DDRC_re_m = 0x80000000, - - DDRRDC_ces_b = 0, - DDRRDC_ces_m = 0x00000001, - DDRRDC_ace_b = 1, - DDRRDC_ace_m = 0x00000002, - - DDRABASE_baseaddr_b = 16, - DDRABASE_baseaddr_m = 0xffff0000, - - DDRAMASK_mask_b = 16, - DDRAMASK_mask_m = 0xffff0000, - - DDRAMAP_map_b = 16, - DDRAMAP_map_m = 0xffff0000, - - DDRCUST_cs_b = 0, - DDRCUST_cs_m = 0x00000003, - DDRCUST_we_b = 2, - DDRCUST_we_m = 0x00000004, - DDRCUST_ras_b = 3, - DDRCUST_ras_m = 0x00000008, - DDRCUST_cas_b = 4, - DDRCUST_cas_m = 0x00000010, - DDRCUST_cke_b = 5, - DDRCUST_cke_m = 0x00000020, - DDRCUST_ba_b = 6, - DDRCUST_ba_m = 0x000000c0, - - RCOUNT_rcount_b = 0, - RCOUNT_rcount_m = 0x0000ffff, - - RCOMPARE_rcompare_b = 0, - RCOMPARE_rcompare_m = 0x0000ffff, - - RTC_ce_b = 0, - RTC_ce_m = 0x00000001, - RTC_to_b = 1, - RTC_to_m = 0x00000002, - RTC_rqe_b = 2, - RTC_rqe_m = 0x00000004, - - DDRDQSC_dm_b = 0, - DDRDQSC_dm_m = 0x00000003, - DDRDQSC_dqsbs_b = 2, - DDRDQSC_dqsbs_m = 0x000000fc, - DDRDQSC_db_b = 8, - DDRDQSC_db_m = 0x00000100, - DDRDQSC_dbsp_b = 9, - DDRDQSC_dbsp_m = 0x01fffe00, - DDRDQSC_bdp_b = 25, - DDRDQSC_bdp_m = 0x7e000000, - - DDRDLLC_eao_b = 0, - DDRDLLC_eao_m = 0x00000001, - DDRDLLC_eo_b = 1, - DDRDLLC_eo_m = 0x0000003e, - DDRDLLC_fs_b = 6, - DDRDLLC_fs_m = 0x000000c0, - DDRDLLC_as_b = 8, - DDRDLLC_as_m = 0x00000700, - DDRDLLC_sp_b = 11, - DDRDLLC_sp_m = 0x001ff800, - - DDRDLLFC_men_b = 0, - DDRDLLFC_men_m = 0x00000001, - DDRDLLFC_aen_b = 1, - DDRDLLFC_aen_m = 0x00000002, - DDRDLLFC_ff_b = 2, - DDRDLLFC_ff_m = 0x00000004, - - DDRDLLTA_addr_b = 2, - DDRDLLTA_addr_m = 0xfffffffc, - - DDRDLLED_dbe_b = 0, - DDRDLLED_dbe_m = 0x00000001, - DDRDLLED_dte_b = 1, - DDRDLLED_dte_m = 0x00000002, - - -} ; - -#endif // __IDT_DDR_H__ diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/dma.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/dma.h deleted file mode 100644 index af34bad45..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/dma.h +++ /dev/null @@ -1,167 +0,0 @@ -#ifndef __IDT_DMA_H__ -#define __IDT_DMA_H__ - -/******************************************************************************* - * - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * DMA register definition. - * - * - * Author : ryan.holmQVist@idt.com - * Date : 20011005 - * Update : - * $Log: dma.h,v $ - * Revision 1.3 2002/06/06 18:34:03 astichte - * Added XXX_PhysicalAddress and XXX_VirtualAddress - * - * Revision 1.2 2002/06/05 18:30:46 astichte - * Removed IDTField - * - * Revision 1.1 2002/05/29 17:33:21 sysarch - * jba File moved from vcode/include/idt/acacia - * - * - ******************************************************************************/ - -enum -{ - DMA0_PhysicalAddress = 0x18040000, - DMA_PhysicalAddress = DMA0_PhysicalAddress, // Default - - DMA0_VirtualAddress = 0xb8040000, - DMA_VirtualAddress = DMA0_VirtualAddress, // Default -} ; - -/* - * DMA descriptor (in physical memory). - */ - -typedef struct DMAD_s -{ - u32 control ; // Control. use DMAD_* - u32 ca ; // Current Address. - u32 devcs ; // Device control and status. - u32 link ; // Next descriptor in chain. -} volatile *DMAD_t ; - -enum -{ - DMAD_size = sizeof (struct DMAD_s), - DMAD_count_b = 0, // in DMAD_t -> control - DMAD_count_m = 0x0003ffff, // in DMAD_t -> control - DMAD_ds_b = 20, // in DMAD_t -> control - DMAD_ds_m = 0x00300000, // in DMAD_t -> control - DMAD_ds_ethRcv_v = 0, - DMAD_ds_ethXmt_v = 0, - DMAD_ds_memToFifo_v = 0, - DMAD_ds_fifoToMem_v = 0, - DMAD_ds_pciToMem_v = 0, - DMAD_ds_memToPci_v = 0, - - DMAD_devcmd_b = 22, // in DMAD_t -> control - DMAD_devcmd_m = 0x01c00000, // in DMAD_t -> control - DMAD_devcmd_byte_v = 0, //memory-to-memory - DMAD_devcmd_halfword_v = 1, //memory-to-memory - DMAD_devcmd_word_v = 2, //memory-to-memory - DMAD_devcmd_2words_v = 3, //memory-to-memory - DMAD_devcmd_4words_v = 4, //memory-to-memory - DMAD_devcmd_6words_v = 5, //memory-to-memory - DMAD_devcmd_8words_v = 6, //memory-to-memory - DMAD_devcmd_16words_v = 7, //memory-to-memory - DMAD_cof_b = 25, // chain on finished - DMAD_cof_m = 0x02000000, // - DMAD_cod_b = 26, // chain on done - DMAD_cod_m = 0x04000000, // - DMAD_iof_b = 27, // interrupt on finished - DMAD_iof_m = 0x08000000, // - DMAD_iod_b = 28, // interrupt on done - DMAD_iod_m = 0x10000000, // - DMAD_t_b = 29, // terminated - DMAD_t_m = 0x20000000, // - DMAD_d_b = 30, // done - DMAD_d_m = 0x40000000, // - DMAD_f_b = 31, // finished - DMAD_f_m = 0x80000000, // -} ; - -/* - * DMA register (within Internal Register Map). - */ - -struct DMA_Chan_s -{ - u32 dmac ; // Control. - u32 dmas ; // Status. - u32 dmasm ; // Mask. - u32 dmadptr ; // Descriptor pointer. - u32 dmandptr ; // Next descriptor pointer. -}; - -typedef struct DMA_Chan_s volatile *DMA_Chan_t ; - -//DMA_Channels use DMACH_count instead - -enum -{ - DMAC_run_b = 0, // - DMAC_run_m = 0x00000001, // - DMAC_dm_b = 1, // done mask - DMAC_dm_m = 0x00000002, // - DMAC_mode_b = 2, // - DMAC_mode_m = 0x0000000c, // - DMAC_mode_auto_v = 0, - DMAC_mode_burst_v = 1, - DMAC_mode_transfer_v = 2, //usually used - DMAC_mode_reserved_v = 3, - DMAC_a_b = 4, // - DMAC_a_m = 0x00000010, // - - DMAS_f_b = 0, // finished (sticky) - DMAS_f_m = 0x00000001, // - DMAS_d_b = 1, // done (sticky) - DMAS_d_m = 0x00000002, // - DMAS_c_b = 2, // chain (sticky) - DMAS_c_m = 0x00000004, // - DMAS_e_b = 3, // error (sticky) - DMAS_e_m = 0x00000008, // - DMAS_h_b = 4, // halt (sticky) - DMAS_h_m = 0x00000010, // - - DMASM_f_b = 0, // finished (1=mask) - DMASM_f_m = 0x00000001, // - DMASM_d_b = 1, // done (1=mask) - DMASM_d_m = 0x00000002, // - DMASM_c_b = 2, // chain (1=mask) - DMASM_c_m = 0x00000004, // - DMASM_e_b = 3, // error (1=mask) - DMASM_e_m = 0x00000008, // - DMASM_h_b = 4, // halt (1=mask) - DMASM_h_m = 0x00000010, // -} ; - -/* - * DMA channel definitions - */ - -enum -{ - DMACH_ethRcv = 0, - DMACH_ethXmt = 1, - DMACH_memToFifo = 2, - DMACH_fifoToMem = 3, - DMACH_pciToMem = 4, - DMACH_memToPci = 5, - - DMACH_count //must be last -}; - - -typedef struct DMAC_s -{ - struct DMA_Chan_s ch [DMACH_count] ; //use ch[DMACH_] -} volatile *DMA_t ; - -#endif // __IDT_DMA_H__ - diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/dma_v.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/dma_v.h deleted file mode 100644 index 9ccc208bb..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/dma_v.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __IDT_DMA_V_H__ -#define __IDT_DMA_V_H__ - -/******************************************************************************* - * - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * DMA register definition. - * - * - * Author : ryan.holmQVist@idt.com - * Date : 20011005 - * Update : - * $Log: dma.h,v $ - * Revision 1.3 2002/06/06 18:34:03 astichte - * Added XXX_PhysicalAddress and XXX_VirtualAddress - * - * Revision 1.2 2002/06/05 18:30:46 astichte - * Removed IDTField - * - * Revision 1.1 2002/05/29 17:33:21 sysarch - * jba File moved from vcode/include/idt/acacia - * - * - ******************************************************************************/ -#include <asm/rc32434/dma.h> -#include <asm/rc32434/rc32434.h> -#define DMA_CHAN_OFFSET 0x14 -#define IS_DMA_USED(X) (((X) & (DMAD_f_m | DMAD_d_m | DMAD_t_m)) != 0) -#define DMA_COUNT(count) \ - ((count) & DMAD_count_m) - -#define DMA_HALT_TIMEOUT 500 - - -static inline int rc32434_halt_dma(DMA_Chan_t ch) -{ - int timeout=1; - if (local_readl(&ch->dmac) & DMAC_run_m) { - local_writel(0, &ch->dmac); - for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) { - if (local_readl(&ch->dmas) & DMAS_h_m) { - local_writel(0, &ch->dmas); - break; - } - } - } - - return timeout ? 0 : 1; -} - -static inline void rc32434_start_dma(DMA_Chan_t ch, u32 dma_addr) -{ - local_writel(0, &ch->dmandptr); - local_writel(dma_addr, &ch->dmadptr); -} - -static inline void rc32434_chain_dma(DMA_Chan_t ch, u32 dma_addr) -{ - local_writel(dma_addr, &ch->dmandptr); -} - -#endif // __IDT_DMA_V_H__ - - - - - - - diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/eth.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/eth.h deleted file mode 100644 index 2a1b23c2f..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/eth.h +++ /dev/null @@ -1,319 +0,0 @@ -#ifndef __IDT_ETH_H__ -#define __IDT_ETH_H__ - -/******************************************************************************* - * - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * Ethernet register definition. - * - * - * Author : Allen.Stichter@idt.com - * Date : 20020605 - * Update : - * $Log: eth.h,v $ - * Revision 1.3 2002/06/06 18:34:04 astichte - * Added XXX_PhysicalAddress and XXX_VirtualAddress - * - * Revision 1.2 2002/06/05 18:19:46 astichte - * Added - * - * Revision 1.1 2002/05/29 17:33:22 sysarch - * jba File moved from vcode/include/idt/acacia - * - ******************************************************************************/ - -enum -{ - ETH0_PhysicalAddress = 0x18060000, - ETH_PhysicalAddress = ETH0_PhysicalAddress, // Default - - ETH0_VirtualAddress = 0xb8060000, - ETH_VirtualAddress = ETH0_VirtualAddress, // Default -} ; - -typedef struct -{ - u32 ethintfc ; - u32 ethfifott ; - u32 etharc ; - u32 ethhash0 ; - u32 ethhash1 ; - u32 ethu0 [4] ; // Reserved. - u32 ethpfs ; - u32 ethmcp ; - u32 eth_u1 [10] ; // Reserved. - u32 ethspare ; - u32 eth_u2 [42] ; // Reserved. - u32 ethsal0 ; - u32 ethsah0 ; - u32 ethsal1 ; - u32 ethsah1 ; - u32 ethsal2 ; - u32 ethsah2 ; - u32 ethsal3 ; - u32 ethsah3 ; - u32 ethrbc ; - u32 ethrpc ; - u32 ethrupc ; - u32 ethrfc ; - u32 ethtbc ; - u32 ethgpf ; - u32 eth_u9 [50] ; // Reserved. - u32 ethmac1 ; - u32 ethmac2 ; - u32 ethipgt ; - u32 ethipgr ; - u32 ethclrt ; - u32 ethmaxf ; - u32 eth_u10 ; // Reserved. - u32 ethmtest ; - u32 miimcfg ; - u32 miimcmd ; - u32 miimaddr ; - u32 miimwtd ; - u32 miimrdd ; - u32 miimind ; - u32 eth_u11 ; // Reserved. - u32 eth_u12 ; // Reserved. - u32 ethcfsa0 ; - u32 ethcfsa1 ; - u32 ethcfsa2 ; -} volatile *ETH_t; - -enum -{ - ETHINTFC_en_b = 0, - ETHINTFC_en_m = 0x00000001, - ETHINTFC_its_b = 1, - ETHINTFC_its_m = 0x00000002, - ETHINTFC_rip_b = 2, - ETHINTFC_rip_m = 0x00000004, - ETHINTFC_jam_b = 3, - ETHINTFC_jam_m = 0x00000008, - ETHINTFC_ovr_b = 4, - ETHINTFC_ovr_m = 0x00000010, - ETHINTFC_und_b = 5, - ETHINTFC_und_m = 0x00000020, - ETHINTFC_iom_b = 6, - ETHINTFC_iom_m = 0x000000c0, - - ETHFIFOTT_tth_b = 0, - ETHFIFOTT_tth_m = 0x0000007f, - - ETHARC_pro_b = 0, - ETHARC_pro_m = 0x00000001, - ETHARC_am_b = 1, - ETHARC_am_m = 0x00000002, - ETHARC_afm_b = 2, - ETHARC_afm_m = 0x00000004, - ETHARC_ab_b = 3, - ETHARC_ab_m = 0x00000008, - - ETHSAL_byte5_b = 0, - ETHSAL_byte5_m = 0x000000ff, - ETHSAL_byte4_b = 8, - ETHSAL_byte4_m = 0x0000ff00, - ETHSAL_byte3_b = 16, - ETHSAL_byte3_m = 0x00ff0000, - ETHSAL_byte2_b = 24, - ETHSAL_byte2_m = 0xff000000, - - ETHSAH_byte1_b = 0, - ETHSAH_byte1_m = 0x000000ff, - ETHSAH_byte0_b = 8, - ETHSAH_byte0_m = 0x0000ff00, - - ETHGPF_ptv_b = 0, - ETHGPF_ptv_m = 0x0000ffff, - - ETHPFS_pfd_b = 0, - ETHPFS_pfd_m = 0x00000001, - - ETHCFSA0_cfsa4_b = 0, - ETHCFSA0_cfsa4_m = 0x000000ff, - ETHCFSA0_cfsa5_b = 8, - ETHCFSA0_cfsa5_m = 0x0000ff00, - - ETHCFSA1_cfsa2_b = 0, - ETHCFSA1_cfsa2_m = 0x000000ff, - ETHCFSA1_cfsa3_b = 8, - ETHCFSA1_cfsa3_m = 0x0000ff00, - - ETHCFSA2_cfsa0_b = 0, - ETHCFSA2_cfsa0_m = 0x000000ff, - ETHCFSA2_cfsa1_b = 8, - ETHCFSA2_cfsa1_m = 0x0000ff00, - - ETHMAC1_re_b = 0, - ETHMAC1_re_m = 0x00000001, - ETHMAC1_paf_b = 1, - ETHMAC1_paf_m = 0x00000002, - ETHMAC1_rfc_b = 2, - ETHMAC1_rfc_m = 0x00000004, - ETHMAC1_tfc_b = 3, - ETHMAC1_tfc_m = 0x00000008, - ETHMAC1_lb_b = 4, - ETHMAC1_lb_m = 0x00000010, - ETHMAC1_mr_b = 31, - ETHMAC1_mr_m = 0x80000000, - - ETHMAC2_fd_b = 0, - ETHMAC2_fd_m = 0x00000001, - ETHMAC2_flc_b = 1, - ETHMAC2_flc_m = 0x00000002, - ETHMAC2_hfe_b = 2, - ETHMAC2_hfe_m = 0x00000004, - ETHMAC2_dc_b = 3, - ETHMAC2_dc_m = 0x00000008, - ETHMAC2_cen_b = 4, - ETHMAC2_cen_m = 0x00000010, - ETHMAC2_pe_b = 5, - ETHMAC2_pe_m = 0x00000020, - ETHMAC2_vpe_b = 6, - ETHMAC2_vpe_m = 0x00000040, - ETHMAC2_ape_b = 7, - ETHMAC2_ape_m = 0x00000080, - ETHMAC2_ppe_b = 8, - ETHMAC2_ppe_m = 0x00000100, - ETHMAC2_lpe_b = 9, - ETHMAC2_lpe_m = 0x00000200, - ETHMAC2_nb_b = 12, - ETHMAC2_nb_m = 0x00001000, - ETHMAC2_bp_b = 13, - ETHMAC2_bp_m = 0x00002000, - ETHMAC2_ed_b = 14, - ETHMAC2_ed_m = 0x00004000, - - ETHIPGT_ipgt_b = 0, - ETHIPGT_ipgt_m = 0x0000007f, - - ETHIPGR_ipgr2_b = 0, - ETHIPGR_ipgr2_m = 0x0000007f, - ETHIPGR_ipgr1_b = 8, - ETHIPGR_ipgr1_m = 0x00007f00, - - ETHCLRT_maxret_b = 0, - ETHCLRT_maxret_m = 0x0000000f, - ETHCLRT_colwin_b = 8, - ETHCLRT_colwin_m = 0x00003f00, - - ETHMAXF_maxf_b = 0, - ETHMAXF_maxf_m = 0x0000ffff, - - ETHMTEST_tb_b = 2, - ETHMTEST_tb_m = 0x00000004, - - ETHMCP_div_b = 0, - ETHMCP_div_m = 0x000000ff, - - MIIMCFG_rsv_b = 0, - MIIMCFG_rsv_m = 0x0000000c, - - MIIMCMD_rd_b = 0, - MIIMCMD_rd_m = 0x00000001, - MIIMCMD_scn_b = 1, - MIIMCMD_scn_m = 0x00000002, - - MIIMADDR_regaddr_b = 0, - MIIMADDR_regaddr_m = 0x0000001f, - MIIMADDR_phyaddr_b = 8, - MIIMADDR_phyaddr_m = 0x00001f00, - - MIIMWTD_wdata_b = 0, - MIIMWTD_wdata_m = 0x0000ffff, - - MIIMRDD_rdata_b = 0, - MIIMRDD_rdata_m = 0x0000ffff, - - MIIMIND_bsy_b = 0, - MIIMIND_bsy_m = 0x00000001, - MIIMIND_scn_b = 1, - MIIMIND_scn_m = 0x00000002, - MIIMIND_nv_b = 2, - MIIMIND_nv_m = 0x00000004, - -} ; - -/* - * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors. - */ -enum -{ - ETHRX_fd_b = 0, - ETHRX_fd_m = 0x00000001, - ETHRX_ld_b = 1, - ETHRX_ld_m = 0x00000002, - ETHRX_rok_b = 2, - ETHRX_rok_m = 0x00000004, - ETHRX_fm_b = 3, - ETHRX_fm_m = 0x00000008, - ETHRX_mp_b = 4, - ETHRX_mp_m = 0x00000010, - ETHRX_bp_b = 5, - ETHRX_bp_m = 0x00000020, - ETHRX_vlt_b = 6, - ETHRX_vlt_m = 0x00000040, - ETHRX_cf_b = 7, - ETHRX_cf_m = 0x00000080, - ETHRX_ovr_b = 8, - ETHRX_ovr_m = 0x00000100, - ETHRX_crc_b = 9, - ETHRX_crc_m = 0x00000200, - ETHRX_cv_b = 10, - ETHRX_cv_m = 0x00000400, - ETHRX_db_b = 11, - ETHRX_db_m = 0x00000800, - ETHRX_le_b = 12, - ETHRX_le_m = 0x00001000, - ETHRX_lor_b = 13, - ETHRX_lor_m = 0x00002000, - ETHRX_ces_b = 14, - ETHRX_ces_m = 0x00004000, - ETHRX_length_b = 16, - ETHRX_length_m = 0xffff0000, - - ETHTX_fd_b = 0, - ETHTX_fd_m = 0x00000001, - ETHTX_ld_b = 1, - ETHTX_ld_m = 0x00000002, - ETHTX_oen_b = 2, - ETHTX_oen_m = 0x00000004, - ETHTX_pen_b = 3, - ETHTX_pen_m = 0x00000008, - ETHTX_cen_b = 4, - ETHTX_cen_m = 0x00000010, - ETHTX_hen_b = 5, - ETHTX_hen_m = 0x00000020, - ETHTX_tok_b = 6, - ETHTX_tok_m = 0x00000040, - ETHTX_mp_b = 7, - ETHTX_mp_m = 0x00000080, - ETHTX_bp_b = 8, - ETHTX_bp_m = 0x00000100, - ETHTX_und_b = 9, - ETHTX_und_m = 0x00000200, - ETHTX_of_b = 10, - ETHTX_of_m = 0x00000400, - ETHTX_ed_b = 11, - ETHTX_ed_m = 0x00000800, - ETHTX_ec_b = 12, - ETHTX_ec_m = 0x00001000, - ETHTX_lc_b = 13, - ETHTX_lc_m = 0x00002000, - ETHTX_td_b = 14, - ETHTX_td_m = 0x00004000, - ETHTX_crc_b = 15, - ETHTX_crc_m = 0x00008000, - ETHTX_le_b = 16, - ETHTX_le_m = 0x00010000, - ETHTX_cc_b = 17, - ETHTX_cc_m = 0x001E0000, -} ; - -#endif // __IDT_ETH_H__ - - - - diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/eth_v.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/eth_v.h deleted file mode 100644 index aeb88a663..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/eth_v.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef __IDT_ETH_V_H__ -#define __IDT_ETH_V_H__ - -/******************************************************************************* - * - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * Ethernet register definition. - * - * - * Author : Allen.Stichter@idt.com - * Date : 20020605 - * Update : - * $Log: eth.h,v $ - * Revision 1.3 2002/06/06 18:34:04 astichte - * Added XXX_PhysicalAddress and XXX_VirtualAddress - * - * Revision 1.2 2002/06/05 18:19:46 astichte - * Added - * - * Revision 1.1 2002/05/29 17:33:22 sysarch - * jba File moved from vcode/include/idt/acacia - * - ******************************************************************************/ - -#include <asm/rc32434/eth.h> - -#define IS_TX_TOK(X) (((X) & (1<<ETHTX_tok_b)) >> ETHTX_tok_b ) /* Transmit Okay */ -#define IS_TX_MP(X) (((X) & (1<<ETHTX_mp_b)) >> ETHTX_mp_b ) /* Multicast */ -#define IS_TX_BP(X) (((X) & (1<<ETHTX_bp_b)) >> ETHTX_bp_b ) /* Broadcast */ -#define IS_TX_UND_ERR(X) (((X) & (1<<ETHTX_und_b)) >> ETHTX_und_b ) /* Transmit FIFO Underflow */ -#define IS_TX_OF_ERR(X) (((X) & (1<<ETHTX_of_b)) >> ETHTX_of_b ) /* Oversized frame */ -#define IS_TX_ED_ERR(X) (((X) & (1<<ETHTX_ed_b)) >> ETHTX_ed_b ) /* Excessive deferral */ -#define IS_TX_EC_ERR(X) (((X) & (1<<ETHTX_ec_b)) >> ETHTX_ec_b) /* Excessive collisions */ -#define IS_TX_LC_ERR(X) (((X) & (1<<ETHTX_lc_b)) >> ETHTX_lc_b ) /* Late Collision */ -#define IS_TX_TD_ERR(X) (((X) & (1<<ETHTX_td_b)) >> ETHTX_td_b ) /* Transmit deferred*/ -#define IS_TX_CRC_ERR(X) (((X) & (1<<ETHTX_crc_b)) >> ETHTX_crc_b ) /* CRC Error */ -#define IS_TX_LE_ERR(X) (((X) & (1<<ETHTX_le_b)) >> ETHTX_le_b ) /* Length Error */ - -#define TX_COLLISION_COUNT(X) (((X) & ETHTX_cc_m)>>ETHTX_cc_b) /* Collision Count */ - -#define IS_RCV_ROK(X) (((X) & (1<<ETHRX_rok_b)) >> ETHRX_rok_b) /* Receive Okay */ -#define IS_RCV_FM(X) (((X) & (1<<ETHRX_fm_b)) >> ETHRX_fm_b) /* Is Filter Match */ -#define IS_RCV_MP(X) (((X) & (1<<ETHRX_mp_b)) >> ETHRX_mp_b) /* Is it MP */ -#define IS_RCV_BP(X) (((X) & (1<<ETHRX_bp_b)) >> ETHRX_bp_b) /* Is it BP */ -#define IS_RCV_VLT(X) (((X) & (1<<ETHRX_vlt_b)) >> ETHRX_vlt_b) /* VLAN Tag Detect */ -#define IS_RCV_CF(X) (((X) & (1<<ETHRX_cf_b)) >> ETHRX_cf_b) /* Control Frame */ -#define IS_RCV_OVR_ERR(X) (((X) & (1<<ETHRX_ovr_b)) >> ETHRX_ovr_b) /* Receive Overflow */ -#define IS_RCV_CRC_ERR(X) (((X) & (1<<ETHRX_crc_b)) >> ETHRX_crc_b) /* CRC Error */ -#define IS_RCV_CV_ERR(X) (((X) & (1<<ETHRX_cv_b)) >> ETHRX_cv_b) /* Code Violation */ -#define IS_RCV_DB_ERR(X) (((X) & (1<<ETHRX_db_b)) >> ETHRX_db_b) /* Dribble Bits */ -#define IS_RCV_LE_ERR(X) (((X) & (1<<ETHRX_le_b)) >> ETHRX_le_b) /* Length error */ -#define IS_RCV_LOR_ERR(X) (((X) & (1<<ETHRX_lor_b)) >> ETHRX_lor_b) /* Length Out of Range */ -#define IS_RCV_CES_ERR(X) (((X) & (1<<ETHRX_ces_b)) >> ETHRX_ces_b) /* Preamble error */ -#define RCVPKT_LENGTH(X) (((X) & ETHRX_length_m) >> ETHRX_length_b) /* Length of the received packet */ -#endif // __IDT_ETH_V_H__ - - - - - diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/gpio.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/gpio.h deleted file mode 100644 index 859b9c921..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/gpio.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * GPIO register definition. - * - * Author : ryan.holmQVist@idt.com - * Date : 20011005 - * Copyright (C) 2001, 2002 Ryan Holm <ryan.holmQVist@idt.com> - * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> - */ - -#ifndef _RC32434_GPIO_H_ -#define _RC32434_GPIO_H_ - -#include <linux/types.h> - -struct rb500_gpio_reg { - u32 gpiofunc; /* GPIO Function Register - * gpiofunc[x]==0 bit = gpio - * func[x]==1 bit = altfunc - */ - u32 gpiocfg; /* GPIO Configuration Register - * gpiocfg[x]==0 bit = input - * gpiocfg[x]==1 bit = output - */ - u32 gpiod; /* GPIO Data Register - * gpiod[x] read/write gpio pinX status - */ - u32 gpioilevel; /* GPIO Interrupt Status Register - * interrupt level (see gpioistat) - */ - u32 gpioistat; /* Gpio Interrupt Status Register - * istat[x] = (gpiod[x] == level[x]) - * cleared in ISR (STICKY bits) - */ - u32 gpionmien; /* GPIO Non-maskable Interrupt Enable Register */ -}; - -/* UART GPIO signals */ -#define RC32434_UART0_SOUT (1 << 0) -#define RC32434_UART0_SIN (1 << 1) -#define RC32434_UART0_RTS (1 << 2) -#define RC32434_UART0_CTS (1 << 3) - -/* M & P bus GPIO signals */ -#define RC32434_MP_BIT_22 (1 << 4) -#define RC32434_MP_BIT_23 (1 << 5) -#define RC32434_MP_BIT_24 (1 << 6) -#define RC32434_MP_BIT_25 (1 << 7) - -/* CPU GPIO signals */ -#define RC32434_CPU_GPIO (1 << 8) - -/* Reserved GPIO signals */ -#define RC32434_AF_SPARE_6 (1 << 9) -#define RC32434_AF_SPARE_4 (1 << 10) -#define RC32434_AF_SPARE_3 (1 << 11) -#define RC32434_AF_SPARE_2 (1 << 12) - -/* PCI messaging unit */ -#define RC32434_PCI_MSU_GPIO (1 << 13) - -extern int rb500_gpio_get_value(unsigned gpio); -extern void rb500_gpio_set_value(unsigned gpio, int value); -extern int rb500_gpio_direction_input(unsigned gpio); -extern int rb500_gpio_direction_output(unsigned gpio, int value); -extern void rb500_gpio_set_int_level(unsigned gpio, int value); -extern int rb500_gpio_get_int_level(unsigned gpio); -extern void rb500_gpio_set_int_status(unsigned gpio, int value); -extern int rb500_gpio_get_int_status(unsigned gpio); -extern void rb500_gpio_set_func(unsigned gpio, int value); -extern int rb500_gpio_get_func(unsigned gpio); - - -/* Wrappers for the arch-neutral GPIO API */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - /* Not yet implemented */ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ - /* Not yet implemented */ -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return rb500_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return rb500_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return rb500_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - rb500_gpio_set_value(gpio, value); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return gpio; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq; -} - -/* For cansleep */ -#include <asm-generic/gpio.h> - -#endif /* _RC32434_GPIO_H_ */ diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/integ.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/integ.h deleted file mode 100644 index f0966e070..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/integ.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef __IDT_INTEG_H__ -#define __IDT_INTEG_H__ - -/******************************************************************************* - * - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * System Integrity register definition. - * - * - * Author : ryan.holmQVist@idt.com - * Date : 20011005 - * Update : - * $Log: integ.h,v $ - * Revision 1.3 2002/06/06 18:34:04 astichte - * Added XXX_PhysicalAddress and XXX_VirtualAddress - * - * Revision 1.2 2002/06/05 18:32:33 astichte - * Removed IDTField - * - * Revision 1.1 2002/05/29 17:33:22 sysarch - * jba File moved from vcode/include/idt/acacia - * - ******************************************************************************/ - -enum -{ - INTEG0_PhysicalAddress = 0x18030000, - INTEG_PhysicalAddress = INTEG0_PhysicalAddress, // Default - - INTEG0_VirtualAddress = 0xb8030000, - INTEG_VirtualAddress = INTEG0_VirtualAddress, // Default -} ; - -// if you are looing for CEA, try rst.h -typedef struct -{ - u32 filler [0xc] ; // 0x30 bytes unused. - u32 errcs ; // sticky use ERRCS_ - u32 wtcount ; // Watchdog timer count reg. - u32 wtcompare ; // Watchdog timer timeout value. - u32 wtc ; // Watchdog timer control. use WTC_ -} volatile *INTEG_t ; - -enum -{ - ERRCS_wto_b = 0, // In INTEG_t -> errcs - ERRCS_wto_m = 0x00000001, - ERRCS_wne_b = 1, // In INTEG_t -> errcs - ERRCS_wne_m = 0x00000002, - ERRCS_ucw_b = 2, // In INTEG_t -> errcs - ERRCS_ucw_m = 0x00000004, - ERRCS_ucr_b = 3, // In INTEG_t -> errcs - ERRCS_ucr_m = 0x00000008, - ERRCS_upw_b = 4, // In INTEG_t -> errcs - ERRCS_upw_m = 0x00000010, - ERRCS_upr_b = 5, // In INTEG_t -> errcs - ERRCS_upr_m = 0x00000020, - ERRCS_udw_b = 6, // In INTEG_t -> errcs - ERRCS_udw_m = 0x00000040, - ERRCS_udr_b = 7, // In INTEG_t -> errcs - ERRCS_udr_m = 0x00000080, - ERRCS_sae_b = 8, // In INTEG_t -> errcs - ERRCS_sae_m = 0x00000100, - ERRCS_wre_b = 9, // In INTEG_t -> errcs - ERRCS_wre_m = 0x00000200, - - WTC_en_b = 0, // In INTEG_t -> wtc - WTC_en_m = 0x00000001, - WTC_to_b = 1, // In INTEG_t -> wtc - WTC_to_m = 0x00000002, -} ; - -#endif // __IDT_INTEG_H__ diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/irq.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/irq.h deleted file mode 100644 index 65cc13c92..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/irq.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_MIPS_IRQ_H -#define __ASM_MACH_MIPS_IRQ_H - -#define NR_IRQS 256 -#include_next <irq.h> - -#endif /* __ASM_MACH_MIPS_IRQ_H */ diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/pci.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/pci.h deleted file mode 100644 index 585a0ae21..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/pci.h +++ /dev/null @@ -1,692 +0,0 @@ -/************************************************************************** - * - * BRIEF MODULE DESCRIPTION - * PCI register definitio - * - * Copyright 2004 IDT Inc. (rischelp@idt.com) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * - ************************************************************************** - * May 2004 rkt, neb. - * - * Initial Release - * - * - * - ************************************************************************** - */ - -#ifndef __IDT_PCI_H__ -#define __IDT_PCI_H__ - -enum -{ - PCI0_PhysicalAddress = 0x18080000, - PCI_PhysicalAddress = PCI0_PhysicalAddress, - - PCI0_VirtualAddress = 0xB8080000, - PCI_VirtualAddress = PCI0_VirtualAddress, -} ; - -enum -{ - PCI_LbaCount = 4, // Local base addresses. -} ; - -typedef struct -{ - u32 a ; // Address. - u32 c ; // Control. - u32 m ; // mapping. -} PCI_Map_s ; - -typedef struct -{ - u32 pcic ; - u32 pcis ; - u32 pcism ; - u32 pcicfga ; - u32 pcicfgd ; - PCI_Map_s pcilba [PCI_LbaCount] ; - u32 pcidac ; - u32 pcidas ; - u32 pcidasm ; - u32 pcidad ; - u32 pcidma8c ; - u32 pcidma9c ; - u32 pcitc ; -} volatile *PCI_t ; - -// PCI messaging unit. -enum -{ - PCIM_Count = 2, -} ; -typedef struct -{ - u32 pciim [PCIM_Count] ; - u32 pciom [PCIM_Count] ; - u32 pciid ; - u32 pciiic ; - u32 pciiim ; - u32 pciiod ; - u32 pciioic ; - u32 pciioim ; -} volatile *PCIM_t ; - -/******************************************************************************* - * - * PCI Control Register - * - ******************************************************************************/ -enum -{ - PCIC_en_b = 0, - PCIC_en_m = 0x00000001, - PCIC_tnr_b = 1, - PCIC_tnr_m = 0x00000002, - PCIC_sce_b = 2, - PCIC_sce_m = 0x00000004, - PCIC_ien_b = 3, - PCIC_ien_m = 0x00000008, - PCIC_aaa_b = 4, - PCIC_aaa_m = 0x00000010, - PCIC_eap_b = 5, - PCIC_eap_m = 0x00000020, - PCIC_pcim_b = 6, - PCIC_pcim_m = 0x000001c0, - PCIC_pcim_disabled_v = 0, - PCIC_pcim_tnr_v = 1, // Satellite - target not ready - PCIC_pcim_suspend_v = 2, // Satellite - suspended CPU. - PCIC_pcim_extern_v = 3, // Host - external arbiter. - PCIC_pcim_fixed_v = 4, // Host - fixed priority arb. - PCIC_pcim_roundrobin_v = 5, // Host - round robin priority. - PCIC_pcim_reserved6_v = 6, - PCIC_pcim_reserved7_v = 7, - PCIC_igm_b = 9, - PCIC_igm_m = 0x00000200, -} ; - -/******************************************************************************* - * - * PCI Status Register - * - ******************************************************************************/ -enum { - PCIS_eed_b = 0, - PCIS_eed_m = 0x00000001, - PCIS_wr_b = 1, - PCIS_wr_m = 0x00000002, - PCIS_nmi_b = 2, - PCIS_nmi_m = 0x00000004, - PCIS_ii_b = 3, - PCIS_ii_m = 0x00000008, - PCIS_cwe_b = 4, - PCIS_cwe_m = 0x00000010, - PCIS_cre_b = 5, - PCIS_cre_m = 0x00000020, - PCIS_mdpe_b = 6, - PCIS_mdpe_m = 0x00000040, - PCIS_sta_b = 7, - PCIS_sta_m = 0x00000080, - PCIS_rta_b = 8, - PCIS_rta_m = 0x00000100, - PCIS_rma_b = 9, - PCIS_rma_m = 0x00000200, - PCIS_sse_b = 10, - PCIS_sse_m = 0x00000400, - PCIS_ose_b = 11, - PCIS_ose_m = 0x00000800, - PCIS_pe_b = 12, - PCIS_pe_m = 0x00001000, - PCIS_tae_b = 13, - PCIS_tae_m = 0x00002000, - PCIS_rle_b = 14, - PCIS_rle_m = 0x00004000, - PCIS_bme_b = 15, - PCIS_bme_m = 0x00008000, - PCIS_prd_b = 16, - PCIS_prd_m = 0x00010000, - PCIS_rip_b = 17, - PCIS_rip_m = 0x00020000, -} ; - -/******************************************************************************* - * - * PCI Status Mask Register - * - ******************************************************************************/ -enum { - PCISM_eed_b = 0, - PCISM_eed_m = 0x00000001, - PCISM_wr_b = 1, - PCISM_wr_m = 0x00000002, - PCISM_nmi_b = 2, - PCISM_nmi_m = 0x00000004, - PCISM_ii_b = 3, - PCISM_ii_m = 0x00000008, - PCISM_cwe_b = 4, - PCISM_cwe_m = 0x00000010, - PCISM_cre_b = 5, - PCISM_cre_m = 0x00000020, - PCISM_mdpe_b = 6, - PCISM_mdpe_m = 0x00000040, - PCISM_sta_b = 7, - PCISM_sta_m = 0x00000080, - PCISM_rta_b = 8, - PCISM_rta_m = 0x00000100, - PCISM_rma_b = 9, - PCISM_rma_m = 0x00000200, - PCISM_sse_b = 10, - PCISM_sse_m = 0x00000400, - PCISM_ose_b = 11, - PCISM_ose_m = 0x00000800, - PCISM_pe_b = 12, - PCISM_pe_m = 0x00001000, - PCISM_tae_b = 13, - PCISM_tae_m = 0x00002000, - PCISM_rle_b = 14, - PCISM_rle_m = 0x00004000, - PCISM_bme_b = 15, - PCISM_bme_m = 0x00008000, - PCISM_prd_b = 16, - PCISM_prd_m = 0x00010000, - PCISM_rip_b = 17, - PCISM_rip_m = 0x00020000, -} ; - -/******************************************************************************* - * - * PCI Configuration Address Register - * - ******************************************************************************/ -enum { - PCICFGA_reg_b = 2, - PCICFGA_reg_m = 0x000000fc, - PCICFGA_reg_id_v = 0x00>>2, //use PCFGID_ - PCICFGA_reg_04_v = 0x04>>2, //use PCFG04_ - PCICFGA_reg_08_v = 0x08>>2, //use PCFG08_ - PCICFGA_reg_0C_v = 0x0C>>2, //use PCFG0C_ - PCICFGA_reg_pba0_v = 0x10>>2, //use PCIPBA_ - PCICFGA_reg_pba1_v = 0x14>>2, //use PCIPBA_ - PCICFGA_reg_pba2_v = 0x18>>2, //use PCIPBA_ - PCICFGA_reg_pba3_v = 0x1c>>2, //use PCIPBA_ - PCICFGA_reg_subsystem_v = 0x2c>>2, //use PCFGSS_ - PCICFGA_reg_3C_v = 0x3C>>2, //use PCFG3C_ - PCICFGA_reg_pba0c_v = 0x44>>2, //use PCIPBAC_ - PCICFGA_reg_pba0m_v = 0x48>>2, - PCICFGA_reg_pba1c_v = 0x4c>>2, //use PCIPBAC_ - PCICFGA_reg_pba1m_v = 0x50>>2, - PCICFGA_reg_pba2c_v = 0x54>>2, //use PCIPBAC_ - PCICFGA_reg_pba2m_v = 0x58>>2, - PCICFGA_reg_pba3c_v = 0x5c>>2, //use PCIPBAC_ - PCICFGA_reg_pba3m_v = 0x60>>2, - PCICFGA_reg_pmgt_v = 0x64>>2, - PCICFGA_func_b = 8, - PCICFGA_func_m = 0x00000700, - PCICFGA_dev_b = 11, - PCICFGA_dev_m = 0x0000f800, - PCICFGA_dev_internal_v = 0, - PCICFGA_bus_b = 16, - PCICFGA_bus_m = 0x00ff0000, - PCICFGA_bus_type0_v = 0, //local bus - PCICFGA_en_b = 31, // read only - PCICFGA_en_m = 0x80000000, -} ; - -enum { - PCFGID_vendor_b = 0, - PCFGID_vendor_m = 0x0000ffff, - PCFGID_vendor_IDT_v = 0x111d, - PCFGID_device_b = 16, - PCFGID_device_m = 0xffff0000, - PCFGID_device_Korinade_v = 0x0214, - - PCFG04_command_ioena_b = 1, - PCFG04_command_ioena_m = 0x00000001, - PCFG04_command_memena_b = 2, - PCFG04_command_memena_m = 0x00000002, - PCFG04_command_bmena_b = 3, - PCFG04_command_bmena_m = 0x00000004, - PCFG04_command_mwinv_b = 5, - PCFG04_command_mwinv_m = 0x00000010, - PCFG04_command_parena_b = 7, - PCFG04_command_parena_m = 0x00000040, - PCFG04_command_serrena_b = 9, - PCFG04_command_serrena_m = 0x00000100, - PCFG04_command_fastbbena_b = 10, - PCFG04_command_fastbbena_m = 0x00000200, - PCFG04_status_b = 16, - PCFG04_status_m = 0xffff0000, - PCFG04_status_66MHz_b = 21, // 66 MHz enable - PCFG04_status_66MHz_m = 0x00200000, - PCFG04_status_fbb_b = 23, - PCFG04_status_fbb_m = 0x00800000, - PCFG04_status_mdpe_b = 24, - PCFG04_status_mdpe_m = 0x01000000, - PCFG04_status_dst_b = 25, - PCFG04_status_dst_m = 0x06000000, - PCFG04_status_sta_b = 27, - PCFG04_status_sta_m = 0x08000000, - PCFG04_status_rta_b = 28, - PCFG04_status_rta_m = 0x10000000, - PCFG04_status_rma_b = 29, - PCFG04_status_rma_m = 0x20000000, - PCFG04_status_sse_b = 30, - PCFG04_status_sse_m = 0x40000000, - PCFG04_status_pe_b = 31, - PCFG04_status_pe_m = 0x40000000, - - PCFG08_revId_b = 0, - PCFG08_revId_m = 0x000000ff, - PCFG08_classCode_b = 0, - PCFG08_classCode_m = 0xffffff00, - PCFG08_classCode_bridge_v = 06, - PCFG08_classCode_proc_v = 0x0b3000, // processor-MIPS - PCFG0C_cacheline_b = 0, - PCFG0C_cacheline_m = 0x000000ff, - PCFG0C_masterLatency_b = 8, - PCFG0C_masterLatency_m = 0x0000ff00, - PCFG0C_headerType_b = 16, - PCFG0C_headerType_m = 0x00ff0000, - PCFG0C_bist_b = 24, - PCFG0C_bist_m = 0xff000000, - - PCIPBA_msi_b = 0, - PCIPBA_msi_m = 0x00000001, - PCIPBA_p_b = 3, - PCIPBA_p_m = 0x00000004, - PCIPBA_baddr_b = 8, - PCIPBA_baddr_m = 0xffffff00, - - PCFGSS_vendorId_b = 0, - PCFGSS_vendorId_m = 0x0000ffff, - PCFGSS_id_b = 16, - PCFGSS_id_m = 0xffff0000, - - PCFG3C_interruptLine_b = 0, - PCFG3C_interruptLine_m = 0x000000ff, - PCFG3C_interruptPin_b = 8, - PCFG3C_interruptPin_m = 0x0000ff00, - PCFG3C_minGrant_b = 16, - PCFG3C_minGrant_m = 0x00ff0000, - PCFG3C_maxLat_b = 24, - PCFG3C_maxLat_m = 0xff000000, - - PCIPBAC_msi_b = 0, - PCIPBAC_msi_m = 0x00000001, - PCIPBAC_p_b = 1, - PCIPBAC_p_m = 0x00000002, - PCIPBAC_size_b = 2, - PCIPBAC_size_m = 0x0000007c, - PCIPBAC_sb_b = 7, - PCIPBAC_sb_m = 0x00000080, - PCIPBAC_pp_b = 8, - PCIPBAC_pp_m = 0x00000100, - PCIPBAC_mr_b = 9, - PCIPBAC_mr_m = 0x00000600, - PCIPBAC_mr_read_v =0, //no prefetching - PCIPBAC_mr_readLine_v =1, - PCIPBAC_mr_readMult_v =2, - PCIPBAC_mrl_b = 11, - PCIPBAC_mrl_m = 0x00000800, - PCIPBAC_mrm_b = 12, - PCIPBAC_mrm_m = 0x00001000, - PCIPBAC_trp_b = 13, - PCIPBAC_trp_m = 0x00002000, - - PCFG40_trdyTimeout_b = 0, - PCFG40_trdyTimeout_m = 0x000000ff, - PCFG40_retryLim_b = 8, - PCFG40_retryLim_m = 0x0000ff00, -}; - -/******************************************************************************* - * - * PCI Local Base Address [0|1|2|3] Register - * - ******************************************************************************/ -enum { - PCILBA_baddr_b = 0, // In PCI_t -> pcilba [] .a - PCILBA_baddr_m = 0xffffff00, -} ; -/******************************************************************************* - * - * PCI Local Base Address Control Register - * - ******************************************************************************/ -enum { - PCILBAC_msi_b = 0, // In pPci->pcilba[i].c - PCILBAC_msi_m = 0x00000001, - PCILBAC_msi_mem_v = 0, - PCILBAC_msi_io_v = 1, - PCILBAC_size_b = 2, // In pPci->pcilba[i].c - PCILBAC_size_m = 0x0000007c, - PCILBAC_sb_b = 7, // In pPci->pcilba[i].c - PCILBAC_sb_m = 0x00000080, - PCILBAC_rt_b = 8, // In pPci->pcilba[i].c - PCILBAC_rt_m = 0x00000100, - PCILBAC_rt_noprefetch_v = 0, // mem read - PCILBAC_rt_prefetch_v = 1, // mem readline -} ; - -/******************************************************************************* - * - * PCI Local Base Address [0|1|2|3] Mapping Register - * - ******************************************************************************/ -enum { - PCILBAM_maddr_b = 8, - PCILBAM_maddr_m = 0xffffff00, -} ; - -/******************************************************************************* - * - * PCI Decoupled Access Control Register - * - ******************************************************************************/ -enum { - PCIDAC_den_b = 0, - PCIDAC_den_m = 0x00000001, -} ; - -/******************************************************************************* - * - * PCI Decoupled Access Status Register - * - ******************************************************************************/ -enum { - PCIDAS_d_b = 0, - PCIDAS_d_m = 0x00000001, - PCIDAS_b_b = 1, - PCIDAS_b_m = 0x00000002, - PCIDAS_e_b = 2, - PCIDAS_e_m = 0x00000004, - PCIDAS_ofe_b = 3, - PCIDAS_ofe_m = 0x00000008, - PCIDAS_off_b = 4, - PCIDAS_off_m = 0x00000010, - PCIDAS_ife_b = 5, - PCIDAS_ife_m = 0x00000020, - PCIDAS_iff_b = 6, - PCIDAS_iff_m = 0x00000040, -} ; - -/******************************************************************************* - * - * PCI DMA Channel 8 Configuration Register - * - ******************************************************************************/ -enum -{ - PCIDMA8C_mbs_b = 0, // Maximum Burst Size. - PCIDMA8C_mbs_m = 0x00000fff, // { pcidma8c } - PCIDMA8C_our_b = 12, // Optimize Unaligned Burst Reads. - PCIDMA8C_our_m = 0x00001000, // { pcidma8c } -} ; - -/******************************************************************************* - * - * PCI DMA Channel 9 Configuration Register - * - ******************************************************************************/ -enum -{ - PCIDMA9C_mbs_b = 0, // Maximum Burst Size. - PCIDMA9C_mbs_m = 0x00000fff, // { pcidma9c } -} ; - -/******************************************************************************* - * - * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors - * - ******************************************************************************/ -enum { - PCIDMAD_pt_b = 22, // in DEVCMD field (descriptor) - PCIDMAD_pt_m = 0x00c00000, // preferred transaction field - // These are for reads (DMA channel 8) - PCIDMAD_devcmd_mr_v = 0, //memory read - PCIDMAD_devcmd_mrl_v = 1, //memory read line - PCIDMAD_devcmd_mrm_v = 2, //memory read multiple - PCIDMAD_devcmd_ior_v = 3, //I/O read - // These are for writes (DMA channel 9) - PCIDMAD_devcmd_mw_v = 0, //memory write - PCIDMAD_devcmd_mwi_v = 1, //memory write invalidate - PCIDMAD_devcmd_iow_v = 3, //I/O write - - // Swap byte field applies to both DMA channel 8 and 9 - PCIDMAD_sb_b = 24, // in DEVCMD field (descriptor) - PCIDMAD_sb_m = 0x01000000, // swap byte field -} ; - - -/******************************************************************************* - * - * PCI Target Control Register - * - ******************************************************************************/ -enum -{ - PCITC_rtimer_b = 0, // In PCITC_t -> pcitc - PCITC_rtimer_m = 0x000000ff, - PCITC_dtimer_b = 8, // In PCITC_t -> pcitc - PCITC_dtimer_m = 0x0000ff00, - PCITC_rdr_b = 18, // In PCITC_t -> pcitc - PCITC_rdr_m = 0x00040000, - PCITC_ddt_b = 19, // In PCITC_t -> pcitc - PCITC_ddt_m = 0x00080000, -} ; -/******************************************************************************* - * - * PCI messaging unit [applies to both inbound and outbound registers ] - * - ******************************************************************************/ -enum -{ - PCIM_m0_b = 0, // In PCIM_t -> {pci{iic,iim,ioic,ioim}} - PCIM_m0_m = 0x00000001, // inbound or outbound message 0 - PCIM_m1_b = 1, // In PCIM_t -> {pci{iic,iim,ioic,ioim}} - PCIM_m1_m = 0x00000002, // inbound or outbound message 1 - PCIM_db_b = 2, // In PCIM_t -> {pci{iic,iim,ioic,ioim}} - PCIM_db_m = 0x00000004, // inbound or outbound doorbell -}; - - - - - - -#define PCI_MSG_VirtualAddress 0xB8088010 -#define rc32434_pci ((volatile PCI_t) PCI0_VirtualAddress) -#define rc32434_pci_msg ((volatile PCIM_t) PCI_MSG_VirtualAddress) - -#define PCIM_SHFT 0x6 -#define PCIM_BIT_LEN 0x7 -#define PCIM_H_EA 0x3 -#define PCIM_H_IA_FIX 0x4 -#define PCIM_H_IA_RR 0x5 - -#define PCI_ADDR_START 0x50000000 - -#define CPUTOPCI_MEM_WIN 0x02000000 -#define CPUTOPCI_IO_WIN 0x00100000 -#define PCILBA_SIZE_SHFT 2 -#define PCILBA_SIZE_MASK 0x1F -#define SIZE_256MB 0x1C -#define SIZE_128MB 0x1B -#define SIZE_64MB 0x1A -#define SIZE_32MB 0x19 -#define SIZE_16MB 0x18 -#define SIZE_4MB 0x16 -#define SIZE_2MB 0x15 -#define SIZE_1MB 0x14 -#define KORINA_CONFIG0_ADDR 0x80000000 -#define KORINA_CONFIG1_ADDR 0x80000004 -#define KORINA_CONFIG2_ADDR 0x80000008 -#define KORINA_CONFIG3_ADDR 0x8000000C -#define KORINA_CONFIG4_ADDR 0x80000010 -#define KORINA_CONFIG5_ADDR 0x80000014 -#define KORINA_CONFIG6_ADDR 0x80000018 -#define KORINA_CONFIG7_ADDR 0x8000001C -#define KORINA_CONFIG8_ADDR 0x80000020 -#define KORINA_CONFIG9_ADDR 0x80000024 -#define KORINA_CONFIG10_ADDR 0x80000028 -#define KORINA_CONFIG11_ADDR 0x8000002C -#define KORINA_CONFIG12_ADDR 0x80000030 -#define KORINA_CONFIG13_ADDR 0x80000034 -#define KORINA_CONFIG14_ADDR 0x80000038 -#define KORINA_CONFIG15_ADDR 0x8000003C -#define KORINA_CONFIG16_ADDR 0x80000040 -#define KORINA_CONFIG17_ADDR 0x80000044 -#define KORINA_CONFIG18_ADDR 0x80000048 -#define KORINA_CONFIG19_ADDR 0x8000004C -#define KORINA_CONFIG20_ADDR 0x80000050 -#define KORINA_CONFIG21_ADDR 0x80000054 -#define KORINA_CONFIG22_ADDR 0x80000058 -#define KORINA_CONFIG23_ADDR 0x8000005C -#define KORINA_CONFIG24_ADDR 0x80000060 -#define KORINA_CONFIG25_ADDR 0x80000064 -#define KORINA_CMD (PCFG04_command_ioena_m | \ - PCFG04_command_memena_m | \ - PCFG04_command_bmena_m | \ - PCFG04_command_mwinv_m | \ - PCFG04_command_parena_m | \ - PCFG04_command_serrena_m ) - -#define KORINA_STAT (PCFG04_status_mdpe_m | \ - PCFG04_status_sta_m | \ - PCFG04_status_rta_m | \ - PCFG04_status_rma_m | \ - PCFG04_status_sse_m | \ - PCFG04_status_pe_m) - -#define KORINA_CNFG1 ((KORINA_STAT<<16)|KORINA_CMD) - -#define KORINA_REVID 0 -#define KORINA_CLASS_CODE 0 -#define KORINA_CNFG2 ((KORINA_CLASS_CODE<<8) | \ - KORINA_REVID) - -#define KORINA_CACHE_LINE_SIZE 4 -#define KORINA_MASTER_LAT 0x3c -#define KORINA_HEADER_TYPE 0 -#define KORINA_BIST 0 - -#define KORINA_CNFG3 ((KORINA_BIST << 24) | \ - (KORINA_HEADER_TYPE<<16) | \ - (KORINA_MASTER_LAT<<8) | \ - KORINA_CACHE_LINE_SIZE ) - -#define KORINA_BAR0 0x00000008 /* 128 MB Memory */ -#define KORINA_BAR1 0x18800001 /* 1 MB IO */ -#define KORINA_BAR2 0x18000001 /* 2 MB IO window for Korina - internal Registers */ -#define KORINA_BAR3 0x48000008 /* Spare 128 MB Memory */ - -#define KORINA_CNFG4 KORINA_BAR0 -#define KORINA_CNFG5 KORINA_BAR1 -#define KORINA_CNFG6 KORINA_BAR2 -#define KORINA_CNFG7 KORINA_BAR3 - -#define KORINA_SUBSYS_VENDOR_ID 0x011d -#define KORINA_SUBSYSTEM_ID 0x0214 -#define KORINA_CNFG8 0 -#define KORINA_CNFG9 0 -#define KORINA_CNFG10 0 -#define KORINA_CNFG11 ((KORINA_SUBSYS_VENDOR_ID<<16) | \ - KORINA_SUBSYSTEM_ID) -#define KORINA_INT_LINE 1 -#define KORINA_INT_PIN 1 -#define KORINA_MIN_GNT 8 -#define KORINA_MAX_LAT 0x38 -#define KORINA_CNFG12 0 -#define KORINA_CNFG13 0 -#define KORINA_CNFG14 0 -#define KORINA_CNFG15 ((KORINA_MAX_LAT<<24) | \ - (KORINA_MIN_GNT<<16) | \ - (KORINA_INT_PIN<<8) | \ - KORINA_INT_LINE) -#define KORINA_RETRY_LIMIT 0x80 -#define KORINA_TRDY_LIMIT 0x80 -#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \ - KORINA_TRDY_LIMIT) -#define PCI_PBAxC_R 0x0 -#define PCI_PBAxC_RL 0x1 -#define PCI_PBAxC_RM 0x2 -#define SIZE_SHFT 2 - -#if defined(__MIPSEB__) -#define KORINA_PBA0C ( PCIPBAC_mrl_m | PCIPBAC_sb_m | \ - ((PCI_PBAxC_RM &0x3) << PCIPBAC_mr_b) | \ - PCIPBAC_pp_m | \ - (SIZE_128MB<<SIZE_SHFT) | \ - PCIPBAC_p_m) -#else -#define KORINA_PBA0C ( PCIPBAC_mrl_m | \ - ((PCI_PBAxC_RM &0x3) << PCIPBAC_mr_b) | \ - PCIPBAC_pp_m | \ - (SIZE_128MB<<SIZE_SHFT) | \ - PCIPBAC_p_m) -#endif -#define KORINA_CNFG17 KORINA_PBA0C -#define KORINA_PBA0M 0x0 -#define KORINA_CNFG18 KORINA_PBA0M - -#if defined(__MIPSEB__) -#define KORINA_PBA1C ((SIZE_1MB<<SIZE_SHFT) | PCIPBAC_sb_m | \ - PCIPBAC_msi_m) -#else -#define KORINA_PBA1C ((SIZE_1MB<<SIZE_SHFT) | \ - PCIPBAC_msi_m) -#endif -#define KORINA_CNFG19 KORINA_PBA1C -#define KORINA_PBA1M 0x0 -#define KORINA_CNFG20 KORINA_PBA1M - -#if defined(__MIPSEB__) -#define KORINA_PBA2C ((SIZE_2MB<<SIZE_SHFT) | PCIPBAC_sb_m | \ - PCIPBAC_msi_m) -#else -#define KORINA_PBA2C ((SIZE_2MB<<SIZE_SHFT) | \ - PCIPBAC_msi_m) -#endif -#define KORINA_CNFG21 KORINA_PBA2C -#define KORINA_PBA2M 0x18000000 -#define KORINA_CNFG22 KORINA_PBA2M -#define KORINA_PBA3C 0 -#define KORINA_CNFG23 KORINA_PBA3C -#define KORINA_PBA3M 0 -#define KORINA_CNFG24 KORINA_PBA3M - - - -#define PCITC_DTIMER_VAL 8 -#define PCITC_RTIMER_VAL 0x10 - - - - -#endif // __IDT_PCI_H__ - - - diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/rb.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/rb.h deleted file mode 100644 index 6800eb090..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/rb.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Copyright (C) 2004 IDT Inc. - * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ -#ifndef __MIPS_RB_H__ -#define __MIPS_RB_H__ -#include <linux/genhd.h> - -#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000)) -#define DEV0BASE 0x010000 -#define DEV0MASK 0x010004 -#define DEV0C 0x010008 -#define DEV0TC 0x01000C -#define DEV1BASE 0x010010 -#define DEV1MASK 0x010014 -#define DEV1C 0x010018 -#define DEV1TC 0x01001C -#define DEV2BASE 0x010020 -#define DEV2MASK 0x010024 -#define DEV2C 0x010028 -#define DEV2TC 0x01002C -#define DEV3BASE 0x010030 -#define DEV3MASK 0x010034 -#define DEV3C 0x010038 -#define DEV3TC 0x01003C -#define BTCS 0x010040 -#define BTCOMPARE 0x010044 -#define GPIOFUNC 0x050000 -#define GPIOCFG 0x050004 -#define GPIOD 0x050008 -#define GPIOILEVEL 0x05000C -#define GPIOISTAT 0x050010 -#define GPIONMIEN 0x050014 -#define IMASK6 0x038038 - -#define LO_WPX (1 << 0) -#define LO_ALE (1 << 1) -#define LO_CLE (1 << 2) -#define LO_CEX (1 << 3) -#define LO_FOFF (1 << 5) -#define LO_SPICS (1 << 6) -#define LO_ULED (1 << 7) - -typedef enum { - FUNC = 0x00, - CFG = 0x04, - DATA = 0x08, - ILEVEL = 0x0c, - ISTAT = 0x10, - NMIEN = 0x14 -} gpio_func; - -extern void changeLatchU5(unsigned char orMask, unsigned char nandMask); -extern unsigned get434Reg(unsigned regOffs); -extern void set434Reg(unsigned regOffs, unsigned bit, unsigned len, unsigned val); -extern void gpio_set(gpio_func func, u32 mask, u32 value); -extern u32 gpio_get(gpio_func func); - -#define get434Reg(x) (*(volatile unsigned *) (IDT434_REG_BASE + (x))) - -struct korina_device { - char *name; - unsigned char mac[6]; - struct net_device *dev; -}; - -struct cf_device { - int gpio_pin; - void *dev; - struct gendisk *gd; -}; - -#endif diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/rc32434.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/rc32434.h deleted file mode 100644 index f3e53e433..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/rc32434.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - *************************************************************************** - * Definitions for IDT RC323434 CPU. - * - **************************************************************************** - * Kiran Rao - * - * Original form - **************************************************************************** - * P. Sadik Oct 08, 2003 - * - * Started revision history - * Made IDT_BUS_FREQ a kernel configuration parameter - **************************************************************************** - * P. Sadik Oct 10, 2003 - * - * Removed IDT_BUS_FREQ, since this parameter is no longer required. Instead - * idt_cpu_freq is used everywhere - **************************************************************************** - * P. Sadik Oct 20, 2003 - * - * Removed RC32434_BASE_BAUD - **************************************************************************** -*/ -#ifndef _RC32434_H_ -#define _RC32434_H_ - -#include <linux/autoconf.h> -#include <linux/delay.h> -#include <asm/io.h> - -#define RC32434_REG_BASE 0x18000000 - -#define interrupt ((volatile INT_t ) INT0_VirtualAddress) - - -#define IDT_CLOCK_MULT 2 -#define MIPS_CPU_TIMER_IRQ 7 -/* Interrupt Controller */ -#define IC_GROUP0_PEND (RC32434_REG_BASE + 0x38000) -#define IC_GROUP0_MASK (RC32434_REG_BASE + 0x38008) -#define IC_GROUP_OFFSET 0x0C - -#define NUM_INTR_GROUPS 5 -/* 16550 UARTs */ - -#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */ -#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) /* GRP3 IRQ numbers start here */ -#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) /* GRP4 IRQ numbers start here */ -#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32) /* GRP5 IRQ numbers start here */ -#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32) - - -#ifdef __MIPSEB__ -#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58003) -#else -#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58000) -#endif - -#define RC32434_UART0_IRQ GROUP3_IRQ_BASE + 0 -// #define EB434_UART1_IRQ GROUP4_IRQ_BASE + 11 - -#define local_readl(addr) __raw_readl(addr) -#define local_writel(l,addr) __raw_writel(l,addr) - -/* cpu pipeline flush */ -static inline void rc32434_sync(void) -{ - __asm__ volatile ("sync"); -} - -static inline void rc32434_sync_udelay(int us) -{ - __asm__ volatile ("sync"); - udelay(us); -} - -static inline void rc32434_sync_delay(int ms) -{ - __asm__ volatile ("sync"); - mdelay(ms); -} - -/* - * C access to CLZ and CLO instructions - * (count leading zeroes/ones). - */ -static inline int rc32434_clz(unsigned long val) -{ - int ret; - __asm__ volatile ( - ".set\tnoreorder\n\t" - ".set\tnoat\n\t" - ".set\tmips32\n\t" - "clz\t%0,%1\n\t" - ".set\tmips0\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (ret) - : "r" (val)); - - return ret; -} -static inline int rc32434_clo(unsigned long val) -{ - int ret; - __asm__ volatile ( - ".set\tnoreorder\n\t" - ".set\tnoat\n\t" - ".set\tmips32\n\t" - "clo\t%0,%1\n\t" - ".set\tmips0\n\t" - ".set\tat\n\t" - ".set\treorder" - : "=r" (ret) - : "r" (val)); - - return ret; -} - -#endif /* _RC32434_H_ */ diff --git a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/war.h b/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/war.h deleted file mode 100644 index 3ddf187e9..000000000 --- a/target/linux/rb532/files-2.6.24/include/asm-mips/rc32434/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_MIPS_WAR_H -#define __ASM_MIPS_MACH_MIPS_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 1 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch b/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch deleted file mode 100644 index f9eae4b52..000000000 --- a/target/linux/rb532/patches-2.6.24/100-rb5xx_support.patch +++ /dev/null @@ -1,95 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -687,6 +687,23 @@ config WR_PPMC - This enables support for the Wind River MIPS32 4KC PPMC evaluation - board, which is based on GT64120 bridge chip. - -+config MIKROTIK_RB500 -+ bool "Support for RB5xx boards" -+ select HW_HAS_PCI -+ select CEVT_R4K -+ select CSRC_R4K -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SWAP_IO_SPACE -+ select DMA_NONCOHERENT -+ select GENERIC_GPIO -+ help -+ Support the Mikrotik(tm) Routerboard 500 series, -+ such as the RB532. -+ -+ - endchoice - - source "arch/mips/au1000/Kconfig" -@@ -967,6 +984,7 @@ config MIPS_L1_CACHE_SHIFT - default "4" if MACH_DECSTATION - default "7" if SGI_IP27 || SNI_RM - default "4" if PMC_MSP4200_EVAL -+ default "4" if MIKROTIK_RB500 - default "5" - - config HAVE_STD_PC_SERIAL_PORT ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -297,6 +297,13 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xfffffff - cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote - - # -+# Routerboard 532 board -+# -+core-$(CONFIG_MIKROTIK_RB500) += arch/mips/rb500/ -+cflags-$(CONFIG_MIKROTIK_RB500) += -Iinclude/asm-mips/rc32434 -+load-$(CONFIG_MIKROTIK_RB500) += 0xffffffff80101000 -+ -+# - # For all MIPS, Inc. eval boards - # - core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/ ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- - obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o -+obj-$(CONFIG_MIKROTIK_RB500) += pci-rc32434.o ops-rc32434.o fixup-rb500.o ---- a/drivers/pci/Makefile -+++ b/drivers/pci/Makefile -@@ -35,6 +35,7 @@ obj-$(CONFIG_PPC32) += setup-irq.o - obj-$(CONFIG_PPC64) += setup-bus.o - obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o - obj-$(CONFIG_X86_VISWS) += setup-irq.o -+obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o - - # - # ACPI Related PCI FW Functions ---- a/include/asm-mips/bootinfo.h -+++ b/include/asm-mips/bootinfo.h -@@ -198,6 +198,14 @@ - #define MACH_GROUP_BRCM 23 /* Broadcom */ - #define MACH_BCM47XX 1 /* Broadcom BCM47XX */ - -+ -+/* -+ * Valid machtype for group Mikrotik -+ */ -+#define MACH_GROUP_MIKROTIK 29 /* Mikrotik Boards */ -+#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ -+#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); ---- a/include/asm-mips/cpu.h -+++ b/include/asm-mips/cpu.h -@@ -196,7 +196,7 @@ enum cpu_type_enum { - */ - CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_74K, CPU_AU1000, - CPU_AU1100, CPU_AU1200, CPU_AU1500, CPU_AU1550, CPU_PR4450, -- CPU_BCM3302, CPU_BCM4710, -+ CPU_BCM3302, CPU_BCM4710, CPU_RC32300, - - /* - * MIPS64 class processors diff --git a/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch b/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch deleted file mode 100644 index 3c46590f9..000000000 --- a/target/linux/rb532/patches-2.6.24/110-korina_ethernet.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -362,6 +362,13 @@ config AX88796_93CX6 - help - Select this if your platform comes with an external 93CX6 eeprom. - -+config KORINA -+ tristate "Korina Local Ethernet support" -+ depends on NET_ETHERNET && ( IDT_EB434 || MIKROTIK_RB500) -+ help -+ IDT RC32434 has one local ethernet port. Say Y here to enable it. -+ To compile this driver as a module, choose M here. -+ - config MACE - tristate "MACE (Power Mac ethernet) support" - depends on PPC_PMAC && PPC32 ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -30,6 +30,8 @@ ucc_geth_driver-objs := ucc_geth.o ucc_g - # - obj-$(CONFIG_PLIP) += plip.o - -+obj-$(CONFIG_KORINA) += korina.o -+ - obj-$(CONFIG_ROADRUNNER) += rrunner.o - - obj-$(CONFIG_HAPPYMEAL) += sunhme.o diff --git a/target/linux/rb532/patches-2.6.24/120-cf.patch b/target/linux/rb532/patches-2.6.24/120-cf.patch deleted file mode 100644 index 15b84a1db..000000000 --- a/target/linux/rb532/patches-2.6.24/120-cf.patch +++ /dev/null @@ -1,27 +0,0 @@ ---- a/drivers/block/Kconfig -+++ b/drivers/block/Kconfig -@@ -408,6 +408,14 @@ config SUNVDC - Support for virtual disk devices as a client under Sun - Logical Domains. - -+config BLK_DEV_CF_MIPS -+ bool "CF slot of RB532 board" -+ depends on MIKROTIK_RB500 -+ default y -+ help -+ The Routerboard 532 has a CF slot on it. Enable the special block -+ device driver for it. -+ - source "drivers/s390/block/Kconfig" - - config XILINX_SYSACE ---- a/drivers/block/Makefile -+++ b/drivers/block/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o - obj-$(CONFIG_XILINX_SYSACE) += xsysace.o - obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o - obj-$(CONFIG_SUNVDC) += sunvdc.o -+obj-$(CONFIG_BLK_DEV_CF_MIPS) += rb500/ - - obj-$(CONFIG_BLK_DEV_UMEM) += umem.o - obj-$(CONFIG_BLK_DEV_NBD) += nbd.o diff --git a/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch b/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch deleted file mode 100644 index 29a4e1966..000000000 --- a/target/linux/rb532/patches-2.6.24/140-cmdline_hack.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/mips/kernel/head.S -+++ b/arch/mips/kernel/head.S -@@ -122,6 +122,10 @@ - - j kernel_entry - nop -+ -+EXPORT(_image_cmdline) -+ .ascii "CMDLINE:" -+ - #ifndef CONFIG_NO_EXCEPT_FILL - /* - * Reserved space for exception handlers. diff --git a/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch b/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch deleted file mode 100644 index 552b7282e..000000000 --- a/target/linux/rb532/patches-2.6.24/200-bridge_resource_hack.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/arch/mips/pci/pci.c -+++ b/arch/mips/pci/pci.c -@@ -64,8 +64,10 @@ pcibios_align_resource(void *data, struc - /* - * Put everything into 0x00-0xff region modulo 0x400 - */ -+#ifndef CONFIG_MIKROTIK_RB500 - if (start & 0x300) - start = (start + 0x3ff) & ~0x3ff; -+#endif - } else if (res->flags & IORESOURCE_MEM) { - /* Make sure we start at our min on all hoses */ - if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start) diff --git a/target/linux/rb532/patches-2.6.24/220-serial_fix.patch b/target/linux/rb532/patches-2.6.24/220-serial_fix.patch deleted file mode 100644 index 59194da34..000000000 --- a/target/linux/rb532/patches-2.6.24/220-serial_fix.patch +++ /dev/null @@ -1,16 +0,0 @@ ---- a/drivers/serial/8250.c -+++ b/drivers/serial/8250.c -@@ -433,6 +433,13 @@ serial_out(struct uart_8250_port *up, in - default: - outb(value, up->port.iobase + offset); - } -+ -+#if defined(CONFIG_IDT_EB434) || defined(CONFIG_MIKROTIK_RB500) -+ __SLOW_DOWN_IO; -+ __SLOW_DOWN_IO; -+ __SLOW_DOWN_IO; -+ __SLOW_DOWN_IO; -+#endif - } - - static void diff --git a/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch b/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch deleted file mode 100644 index ba66d40bd..000000000 --- a/target/linux/rb532/patches-2.6.24/240-via_rhine_performance.patch +++ /dev/null @@ -1,98 +0,0 @@ ---- a/drivers/net/via-rhine.c -+++ b/drivers/net/via-rhine.c -@@ -33,6 +33,8 @@ - #define DRV_VERSION "1.4.3" - #define DRV_RELDATE "2007-03-06" - -+#define PKT_ALIGN 1 -+ - - /* A few user-configurable values. - These may be modified when a driver module is loaded. */ -@@ -40,6 +42,7 @@ - static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ - static int max_interrupt_work = 20; - -+#ifndef PKT_ALIGN - /* Set the copy breakpoint for the copy-only-tiny-frames scheme. - Setting to > 1518 effectively disables this feature. */ - #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \ -@@ -49,6 +52,7 @@ static int rx_copybreak = 1518; - #else - static int rx_copybreak; - #endif -+#endif /* PKT_ALIGN */ - - /* Work-around for broken BIOSes: they are unable to get the chip back out of - power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */ -@@ -111,6 +115,7 @@ static const int multicast_filter_limit - #include <asm/io.h> - #include <asm/irq.h> - #include <asm/uaccess.h> -+#include <asm/unaligned.h> - #include <linux/dmi.h> - - /* These identify the driver base version and may not be removed. */ -@@ -130,12 +135,14 @@ MODULE_LICENSE("GPL"); - - module_param(max_interrupt_work, int, 0); - module_param(debug, int, 0); --module_param(rx_copybreak, int, 0); - module_param(avoid_D3, bool, 0); - MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt"); - MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)"); --MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); - MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)"); -+#ifndef PKT_ALIGN -+module_param(rx_copybreak, int, 0); -+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames"); -+#endif - - /* - Theory of Operation -@@ -922,7 +929,7 @@ static void alloc_rbufs(struct net_devic - - /* Fill in the Rx buffers. Handle allocation failure gracefully. */ - for (i = 0; i < RX_RING_SIZE; i++) { -- struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz); -+ struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz + 4); - rp->rx_skbuff[i] = skb; - if (skb == NULL) - break; -@@ -1485,7 +1492,9 @@ static int rhine_rx(struct net_device *d - struct sk_buff *skb; - /* Length should omit the CRC */ - int pkt_len = data_size - 4; -- -+#ifdef PKT_ALIGN -+ int i; -+#else - /* Check if the packet is long enough to accept without - copying to a minimally-sized skbuff. */ - if (pkt_len < rx_copybreak && -@@ -1504,7 +1513,9 @@ static int rhine_rx(struct net_device *d - rp->rx_skbuff_dma[entry], - rp->rx_buf_sz, - PCI_DMA_FROMDEVICE); -- } else { -+ } else -+#endif -+ { - skb = rp->rx_skbuff[entry]; - if (skb == NULL) { - printk(KERN_ERR "%s: Inconsistent Rx " -@@ -1518,6 +1529,14 @@ static int rhine_rx(struct net_device *d - rp->rx_skbuff_dma[entry], - rp->rx_buf_sz, - PCI_DMA_FROMDEVICE); -+#ifdef PKT_ALIGN -+ /* align the data to the ip header - should be faster than copying the entire packet */ -+ for (i = pkt_len - (pkt_len % 4); i >= 0; i -= 4) { -+ put_unaligned(*((u32 *) (skb->data + i)), (u32 *) (skb->data + i + 2)); -+ } -+ skb->data += 2; -+ skb->tail += 2; -+#endif - } - skb->protocol = eth_type_trans(skb, dev); - #ifdef CONFIG_VIA_RHINE_NAPI diff --git a/target/linux/rb532/patches-2.6.24/510-rb500_led.patch b/target/linux/rb532/patches-2.6.24/510-rb500_led.patch deleted file mode 100644 index d38b427fd..000000000 --- a/target/linux/rb532/patches-2.6.24/510-rb500_led.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -120,6 +120,12 @@ config LEDS_CM_X270 - help - This option enables support for the CM-X270 LEDs. - -+config LEDS_RB500 -+ tristate "LED Support for RB5xx boards" -+ depends on LEDS_CLASS && MIKROTIK_RB500 -+ help -+ This option enables support for the yellow user LED on RB5xx boards. -+ - comment "LED Triggers" - - config LEDS_TRIGGERS ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds- - obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o - obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o - obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o -+obj-$(CONFIG_LEDS_RB500) += leds-rb500.o - - # LED Triggers - obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o diff --git a/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch b/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch deleted file mode 100644 index cfcf69777..000000000 --- a/target/linux/rb532/patches-2.6.24/520-rc32434_wdt.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/mips/kernel/time.c -+++ b/arch/mips/kernel/time.c -@@ -75,6 +75,7 @@ EXPORT_SYMBOL(perf_irq); - */ - - unsigned int mips_hpt_frequency; -+EXPORT_SYMBOL(mips_hpt_frequency); - - void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock) - { ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -639,6 +639,18 @@ config AR7_WDT - help - Hardware driver for the TI AR7 Watchdog Timer. - -+config RC32434_WDT -+ tristate "IDT Interprise 79RC32434 SoC hardware watchdog" -+ depends on WATCHDOG && MIKROTIK_RB500 -+ help -+ This is a driver for hardware watchdog integrated in IDT Interprise -+ 79RC32434 SoC. This watchdog simply watches your kernel to make sure -+ it doesn't freeze, and if it does, it reboots your computer after a -+ certain amount of time. -+ -+ To compile this driver as a module, choose M here: the module will be -+ called rc32434_wdt. -+ - # PARISC Architecture - - # POWERPC Architecture diff --git a/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch b/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch deleted file mode 100644 index 1e79bfcd0..000000000 --- a/target/linux/rb532/patches-2.6.24/530-no_panic_pci_iomap.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/arch/mips/lib/iomap-pci.c -+++ b/arch/mips/lib/iomap-pci.c -@@ -32,7 +32,7 @@ static void __iomem *ioport_map_pci(stru - "report it to linux-mips@linux-mips.org or your " - "vendor.\n", name); - #ifdef CONFIG_PCI_DOMAINS -- panic("To avoid data corruption io_map_base MUST be set with " -+ printk(KERN_WARNING "To avoid data corruption io_map_base MUST be set with " - "multiple PCI domains."); - #endif - } |