diff options
Diffstat (limited to 'target/linux')
16 files changed, 877 insertions, 0 deletions
| diff --git a/target/linux/ar71xx/config-2.6.27 b/target/linux/ar71xx/config-2.6.27 new file mode 100644 index 000000000..2e994aeec --- /dev/null +++ b/target/linux/ar71xx/config-2.6.27 @@ -0,0 +1,277 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +# CONFIG_8139TOO is not set +CONFIG_ADM6996_PHY=y +CONFIG_AG71XX=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_AR71XX_EARLY_SERIAL is not set +CONFIG_AR71XX_MACH_GENERIC=y +CONFIG_AR71XX_MACH_RB_4XX=y +CONFIG_AR71XX_MACH_WP543=y +CONFIG_AR71XX_WDT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ATHEROS_AR71XX=y +# CONFIG_ATL1E is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BCM47XX is not set +CONFIG_BITREVERSE=y +# CONFIG_BROADCOM_PHY is not set +CONFIG_BT_HCIBTUSB=m +CONFIG_CEVT_R4K=y +CONFIG_CLASSIC_RCU=y +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200 init=/etc/preinit" +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR2=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CSRC_R4K=y +# CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +# CONFIG_DMADEVICES is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_FIXED_PHY is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GPIOLIB=y +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_MAX7301 is not set +CONFIG_GPIO_SYSFS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_CLK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_HAVE_IDE=y +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HP_ILO is not set +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=m +# CONFIG_I2C is not set +CONFIG_ICPLUS_PHY=y +# CONFIG_IDE is not set +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_SOURCE="../../root" +CONFIG_IRQ_CPU=y +# CONFIG_ISDN is not set +CONFIG_KMOD=y +# CONFIG_LEDS_ALIX is not set +CONFIG_LEDS_GPIO=m +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_M25PXX_USE_FAST_READ is not set +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_TMIO is not set +CONFIG_MICREL_PHY=y +# CONFIG_MIKROTIK_RB532 is not set +CONFIG_MIPS=y +# CONFIG_MIPS_COBALT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SIM is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_ALAUDA is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CHAR=y +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_CONCAT=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_M25P80=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_RB4XX=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2 +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +CONFIG_MYLOADER=y +# CONFIG_NATSEMI is not set +CONFIG_NF_CT_ACCT=y +# CONFIG_NO_IOPORT is not set +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_PHYLIB=y +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PROBE_INITRD_HEADER is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_R6040 is not set +# CONFIG_REALTEK_PHY is not set +CONFIG_RFKILL_LEDS=y +CONFIG_RTC_LIB=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_SCSI_DH is not set +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SMSC_PHY is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_MIPS is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_USB is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPI=y +CONFIG_SPI_AR71XX=y +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_MASTER=y +# CONFIG_SPI_SPIDEV is not set +CONFIG_SSB_POSSIBLE=y +CONFIG_STP=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +# CONFIG_TC35815 is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_TICK_ONESHOT=y +CONFIG_TRAD_SIGNALS=y +CONFIG_USB=m +CONFIG_USB_EHCI_AR71XX=y +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_OHCI_AR71XX=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=m +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIA_RHINE is not set +CONFIG_VIDEO_MEDIA=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_COMMON=m +# CONFIG_VLAN_8021Q_GVRP is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_YAFFS_9BYTE_TAGS=y +CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y +CONFIG_YAFFS_AUTO_YAFFS2=y +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0 +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_YAFFS_YAFFS1=y +CONFIG_YAFFS_YAFFS2=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar71xx/patches-2.6.27/001-ar71xx_core.patch b/target/linux/ar71xx/patches-2.6.27/001-ar71xx_core.patch new file mode 100644 index 000000000..1f1480c87 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/001-ar71xx_core.patch @@ -0,0 +1,60 @@ +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -577,6 +577,13 @@ + # + core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/ +  ++# ++# Atheros AR71xx ++# ++core-$(CONFIG_ATHEROS_AR71XX)	+= arch/mips/ar71xx/ ++cflags-$(CONFIG_ATHEROS_AR71XX)	+= -Iinclude/asm-mips/mach-ar71xx ++load-$(CONFIG_ATHEROS_AR71XX)	+= 0xffffffff80060000 ++ + # temporary until string.h is fixed + cflags-y += -ffreestanding +  +--- a/include/asm-mips/bootinfo.h ++++ b/include/asm-mips/bootinfo.h +@@ -57,6 +57,15 @@ + #define	MACH_MIKROTIK_RB532	0	/* Mikrotik RouterBoard 532 	*/ + #define MACH_MIKROTIK_RB532A	1	/* Mikrotik RouterBoard 532A 	*/ +  ++/* ++ * Valid machtype for Atheros AR71xx based boards ++ */ ++#define MACH_AR71XX_GENERIC	0 ++#define MACH_AR71XX_WP543	1	/* Compex WP543 */ ++#define MACH_AR71XX_RB_411	2	/* MikroTik RouterBOARD 411 */ ++#define MACH_AR71XX_RB_433	3	/* MikroTik RouterBOARD 433/433AH */ ++#define MACH_AR71XX_RB_450	4	/* MikroTik RouterBOARD 450 */ ++ + #define CL_SIZE			COMMAND_LINE_SIZE +  + extern char *system_type; +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -22,6 +22,23 @@ + config MACH_ALCHEMY + 	bool "Alchemy processor based machines" +  ++config ATHEROS_AR71XX ++	bool "Atheros AR71xx based boards" ++	select CEVT_R4K ++	select CSRC_R4K ++	select DMA_NONCOHERENT ++	select HW_HAS_PCI ++	select IRQ_CPU ++	select ARCH_REQUIRE_GPIOLIB ++	select SYS_HAS_CPU_MIPS32_R1 ++	select SYS_HAS_CPU_MIPS32_R2 ++	select SYS_SUPPORTS_32BIT_KERNEL ++	select SYS_SUPPORTS_BIG_ENDIAN ++	select SYS_HAS_EARLY_PRINTK ++	select MIPS_MACHINE ++	help ++	  Support for Atheros AR71xx based boards. ++ + config BASLER_EXCITE + 	bool "Basler eXcite smart camera" + 	select CEVT_R4K diff --git a/target/linux/ar71xx/patches-2.6.27/002-ar71xx_pci.patch b/target/linux/ar71xx/patches-2.6.27/002-ar71xx_pci.patch new file mode 100644 index 000000000..849938ef6 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/002-ar71xx_pci.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -16,6 +16,7 @@ + obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o + obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o + obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o ++obj-$(CONFIG_ATHEROS_AR71XX)	+= pci-ar71xx.o +  + # + # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/ar71xx/patches-2.6.27/003-ar71xx_usb_host.patch b/target/linux/ar71xx/patches-2.6.27/003-ar71xx_usb_host.patch new file mode 100644 index 000000000..e28d0451a --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/003-ar71xx_usb_host.patch @@ -0,0 +1,70 @@ +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -81,6 +81,12 @@ + 	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX) + 	default y +  ++config USB_EHCI_AR71XX ++	bool "USB EHCI support for AR71xx" ++	depends on USB_EHCI_HCD && ATHEROS_AR71XX ++	help ++	  Support for Atheros AR71xx built-in EHCI controller ++ + config USB_EHCI_FSL + 	bool "Support for Freescale on-chip EHCI USB controller" + 	depends on USB_EHCI_HCD && FSL_SOC +@@ -152,6 +158,12 @@ + 	  To compile this driver as a module, choose M here: the + 	  module will be called ohci-hcd. +  ++config USB_OHCI_AR71XX ++	bool "USB OHCI support for Atheros AR71xx" ++	depends on USB_OHCI_HCD && ATHEROS_AR71XX ++	help ++	  Support for Atheros AR71xx built-in OHCI controller ++ + config USB_OHCI_HCD_PPC_SOC + 	bool "OHCI support for on-chip PPC USB controller" + 	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx) +--- a/drivers/usb/host/ehci-hcd.c ++++ b/drivers/usb/host/ehci-hcd.c +@@ -1040,6 +1040,11 @@ + #define	PLATFORM_DRIVER		ixp4xx_ehci_driver + #endif +  ++#ifdef CONFIG_USB_EHCI_AR71XX ++#include "ehci-ar71xx.c" ++#define PLATFORM_DRIVER		ehci_hcd_ar71xx_driver ++#endif ++ + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ +     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) + #error "missing bus glue for ehci-hcd" +--- a/drivers/usb/host/ohci.h ++++ b/drivers/usb/host/ohci.h +@@ -549,6 +549,11 @@ + #define writel_be(val, addr)	out_be32((__force unsigned *)addr, val) + #endif +  ++#if defined(CONFIG_ATHEROS_AR71XX) ++#define readl_be(addr)		__raw_readl(addr) ++#define writel_be(val, addr)	__raw_writel(addr, val) ++#endif ++ + static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci, + 					__hc32 __iomem * regs) + { +--- a/drivers/usb/host/ohci-hcd.c ++++ b/drivers/usb/host/ohci-hcd.c +@@ -1078,6 +1078,11 @@ + #define SM501_OHCI_DRIVER	ohci_hcd_sm501_driver + #endif +  ++#ifdef CONFIG_USB_OHCI_AR71XX ++#include "ohci-ar71xx.c" ++#define PLATFORM_DRIVER		ohci_hcd_ar71xx_driver ++#endif ++ + #if	!defined(PCI_DRIVER) &&		\ + 	!defined(PLATFORM_DRIVER) &&	\ + 	!defined(OF_PLATFORM_DRIVER) &&	\ diff --git a/target/linux/ar71xx/patches-2.6.27/004-ar71xx_spi_controller.patch b/target/linux/ar71xx/patches-2.6.27/004-ar71xx_spi_controller.patch new file mode 100644 index 000000000..ef9f7e807 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/004-ar71xx_spi_controller.patch @@ -0,0 +1,26 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -53,6 +53,13 @@ +  + comment "SPI Master Controller Drivers" +  ++config SPI_AR71XX ++	tristate "Atheros AR71xx SPI Controller" ++	depends on SPI_MASTER && ATHEROS_AR71XX ++	select SPI_BITBANG ++	help ++	  This is the SPI contoller driver for Atheros AR71xx. ++ + config SPI_ATMEL + 	tristate "Atmel SPI Controller" + 	depends on (ARCH_AT91 || AVR32) +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -11,6 +11,7 @@ + obj-$(CONFIG_SPI_MASTER)		+= spi.o +  + # SPI master controller drivers (bus) ++obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o + obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o + obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o + obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o diff --git a/target/linux/ar71xx/patches-2.6.27/005-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-2.6.27/005-ar71xx_mac_driver.patch new file mode 100644 index 000000000..6e4c7b015 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/005-ar71xx_mac_driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -2015,6 +2015,8 @@ +  + 	  The safe and default value for this is N. +  ++source drivers/net/ag71xx/Kconfig ++ + config DL2K + 	tristate "DL2000/TC902x-based Gigabit Ethernet support" + 	depends on PCI +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -2,6 +2,7 @@ + # Makefile for the Linux network (ethercard) device drivers. + # +  ++obj-$(CONFIG_AG71XX) += ag71xx/ + obj-$(CONFIG_E1000) += e1000/ + obj-$(CONFIG_E1000E) += e1000e/ + obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/ diff --git a/target/linux/ar71xx/patches-2.6.27/006-ar71xx_wdt_driver.patch b/target/linux/ar71xx/patches-2.6.27/006-ar71xx_wdt_driver.patch new file mode 100644 index 000000000..2dc92f92d --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/006-ar71xx_wdt_driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -704,6 +704,13 @@ + 	help + 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. +  ++config AR71XX_WDT ++	tristate "Atheros AR71xx Watchdog Timer" ++	depends on ATHEROS_AR71XX ++	help ++	  Hardware driver for the built-in watchdog timer on the Atheros ++	  AR71xx SoCs. ++ + # PARISC Architecture +  + # POWERPC Architecture +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -102,6 +102,7 @@ + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o ++obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o +  + # PARISC Architecture +  diff --git a/target/linux/ar71xx/patches-2.6.27/100-mtd_pm25lv_flash_support.patch b/target/linux/ar71xx/patches-2.6.27/100-mtd_pm25lv_flash_support.patch new file mode 100644 index 000000000..34a3d04ee --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/100-mtd_pm25lv_flash_support.patch @@ -0,0 +1,13 @@ +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -467,6 +467,10 @@ + 	{ "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, }, + 	{ "at26df321",  0x1f4701, 64 * 1024, 64, SECT_4K, }, +  ++	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */ ++	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K }, ++	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K }, ++ + 	/* Spansion -- single (large) sector size only, at least + 	 * for the chips listed here (without boot sectors). + 	 */ diff --git a/target/linux/ar71xx/patches-2.6.27/101-ksz8041_phy_driver.patch b/target/linux/ar71xx/patches-2.6.27/101-ksz8041_phy_driver.patch new file mode 100644 index 000000000..079750502 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/101-ksz8041_phy_driver.patch @@ -0,0 +1,24 @@ +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -77,6 +77,11 @@ + 	---help--- + 	  Currently supports the Marvell 88E6060 switch. +  ++config MICREL_PHY ++	tristate "Drivers for Micrel/Kendin PHYs" ++	---help--- ++	  Currently has a driver for the KSZ8041 ++ + config FIXED_PHY + 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + 	depends on PHYLIB=y +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -15,6 +15,7 @@ + obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o + obj-$(CONFIG_MVSWITCH_PHY)	+= mvswitch.o + obj-$(CONFIG_REALTEK_PHY)	+= realtek.o ++obj-$(CONFIG_MICREL_PHY)	+= micrel.o + obj-$(CONFIG_FIXED_PHY)		+= fixed.o + obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o + obj-$(CONFIG_MDIO_OF_GPIO)	+= mdio-ofgpio.o diff --git a/target/linux/ar71xx/patches-2.6.27/140-redboot_partition_scan.patch b/target/linux/ar71xx/patches-2.6.27/140-redboot_partition_scan.patch new file mode 100644 index 000000000..a76bd83bb --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/140-redboot_partition_scan.patch @@ -0,0 +1,54 @@ +--- a/drivers/mtd/redboot.c ++++ b/drivers/mtd/redboot.c +@@ -60,31 +60,32 @@ + 	static char nullstring[] = "unallocated"; + #endif +  ++	buf = vmalloc(master->erasesize); ++	if (!buf) ++		return -ENOMEM; ++ ++ restart: + 	if ( directory < 0 ) { + 		offset = master->size + directory * master->erasesize; +-		while (master->block_isbad &&  ++		while (master->block_isbad && + 		       master->block_isbad(master, offset)) { + 			if (!offset) { + 			nogood: + 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); ++				vfree(buf); + 				return -EIO; + 			} + 			offset -= master->erasesize; + 		} + 	} else { + 		offset = directory * master->erasesize; +-		while (master->block_isbad &&  ++		while (master->block_isbad && + 		       master->block_isbad(master, offset)) { + 			offset += master->erasesize; + 			if (offset == master->size) + 				goto nogood; + 		} + 	} +-	buf = vmalloc(master->erasesize); +- +-	if (!buf) +-		return -ENOMEM; +- + 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", + 	       master->name, offset); +  +@@ -156,6 +157,11 @@ + 	} + 	if (i == numslots) { + 		/* Didn't find it */ ++		if (offset + master->erasesize < master->size) { ++			/* not at the end of the flash yet, maybe next block :) */ ++			directory++; ++			goto restart; ++		} + 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", + 		       master->name); + 		ret = 0; diff --git a/target/linux/ar71xx/patches-2.6.27/200-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-2.6.27/200-rb4xx_nand_driver.patch new file mode 100644 index 000000000..bc468ee0c --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/200-rb4xx_nand_driver.patch @@ -0,0 +1,21 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -406,4 +406,8 @@ + 	  Enables support for NAND Flash chips wired onto Freescale PowerPC + 	  processor localbus with User-Programmable Machine support. +  ++config MTD_NAND_RB4XX ++	tristate "NAND flash driver for RouterBoard 4xx series" ++	depends on MTD_NAND && ATHEROS_AR71XX ++ + endif # MTD_NAND +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -29,6 +29,7 @@ + obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o + obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o + obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o ++obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o + obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o + obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o + obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o diff --git a/target/linux/ar71xx/patches-2.6.27/300-mips_fw_myloader.patch b/target/linux/ar71xx/patches-2.6.27/300-mips_fw_myloader.patch new file mode 100644 index 000000000..bfff74aad --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/300-mips_fw_myloader.patch @@ -0,0 +1,22 @@ +--- a/arch/mips/Makefile ++++ b/arch/mips/Makefile +@@ -158,6 +158,7 @@ + # + libs-$(CONFIG_ARC)		+= arch/mips/fw/arc/ + libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/ ++libs-$(CONFIG_MYLOADER)		+= arch/mips/fw/myloader/ + libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/ + libs-y				+= arch/mips/fw/lib/ + libs-$(CONFIG_SIBYTE_CFE)	+= arch/mips/sibyte/cfe/ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -781,6 +781,9 @@ + config MIPS_DISABLE_OBSOLETE_IDE + 	bool +  ++config MYLOADER ++	bool ++ + config SYNC_R4K + 	bool +  diff --git a/target/linux/ar71xx/patches-2.6.27/800-remove_netif_schedule.patch b/target/linux/ar71xx/patches-2.6.27/800-remove_netif_schedule.patch new file mode 100644 index 000000000..1c9e56918 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/800-remove_netif_schedule.patch @@ -0,0 +1,16 @@ +--- a/drivers/net/ag71xx/ag71xx_phy.c ++++ b/drivers/net/ag71xx/ag71xx_phy.c +@@ -171,12 +171,8 @@ + 		} + 	} +  +-	if (phydev->link != ag->link) { +-		if (phydev->link) +-			netif_schedule(dev); +- ++	if (phydev->link != ag->link) + 		status_change = 1; +-	} +  + 	ag->link = phydev->link; + 	ag->duplex = phydev->duplex; diff --git a/target/linux/ar71xx/patches-2.6.27/900-mips_multi_machine_support.patch b/target/linux/ar71xx/patches-2.6.27/900-mips_multi_machine_support.patch new file mode 100644 index 000000000..df64d3ff5 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/900-mips_multi_machine_support.patch @@ -0,0 +1,143 @@ +--- /dev/null ++++ b/include/asm-mips/mips_machine.h +@@ -0,0 +1,49 @@ ++/* ++ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> ++ * ++ *  This program is free software; you can redistribute it and/or modify it ++ *  under the terms of the GNU General Public License version 2 as published ++ *  by the Free Software Foundation. ++ * ++ */ ++ ++#ifndef __ASM_MIPS_MACHINE_H ++#define __ASM_MIPS_MACHINE_H ++ ++#include <linux/init.h> ++#include <linux/list.h> ++ ++#include <asm/bootinfo.h> ++ ++#define MIPS_MACHINE_NAME_LEN	64 ++ ++struct mips_machine { ++	unsigned long		mach_type; ++	void			(*mach_setup)(void); ++	unsigned char		mach_name[MIPS_MACHINE_NAME_LEN]; ++	struct list_head	list; ++}; ++ ++void mips_machine_register(struct mips_machine *) __init; ++void mips_machine_setup(void) __init; ++ ++extern unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN]; ++ ++#define MIPS_MACHINE(_type, _name, _setup) 			\ ++static struct mips_machine machine_##_type __initdata =		\ ++{								\ ++	.mach_type	= _type,				\ ++	.mach_name	= _name,				\ ++	.mach_setup	= _setup,				\ ++};								\ ++								\ ++static int __init register_machine_##_type(void)		\ ++{								\ ++	mips_machine_register(&machine_##_type);		\ ++	return 0;						\ ++}								\ ++								\ ++pure_initcall(register_machine_##_type) ++ ++#endif /* __ASM_MIPS_MACHINE_H */ ++ +--- /dev/null ++++ b/arch/mips/kernel/mips_machine.c +@@ -0,0 +1,58 @@ ++/* ++ *  Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> ++ * ++ *  This program is free software; you can redistribute it and/or modify it ++ *  under the terms of the GNU General Public License version 2 as published ++ *  by the Free Software Foundation. ++ * ++ */ ++ ++#include <asm/mips_machine.h> ++#include <asm/bootinfo.h> ++ ++static struct list_head mips_machines __initdata = ++		LIST_HEAD_INIT(mips_machines); ++ ++unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN] = "Unknown"; ++ ++static struct mips_machine * __init mips_machine_find(unsigned long machtype) ++{ ++	struct list_head *this; ++ ++	list_for_each(this, &mips_machines) { ++		struct mips_machine *mach; ++ ++		mach = list_entry(this, struct mips_machine, list); ++		if (mach->mach_type == machtype) ++			return mach; ++	} ++ ++	return NULL; ++} ++ ++void __init mips_machine_register(struct mips_machine *mach) ++{ ++	list_add_tail(&mach->list, &mips_machines); ++} ++ ++void __init mips_machine_setup(void) ++{ ++	struct mips_machine *mach; ++ ++	mach = mips_machine_find(mips_machtype); ++	if (!mach) { ++		printk(KERN_ALERT "MIPS: no machine registered for " ++			"machtype %lu\n", mips_machtype); ++		return; ++	} ++ ++	if (mach->mach_name[0]) ++		strncpy(mips_machine_name, mach->mach_name, ++			MIPS_MACHINE_NAME_LEN); ++ ++	printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name); ++ ++	if (mach->mach_setup) ++		mach->mach_setup(); ++} ++ +--- a/arch/mips/kernel/Makefile ++++ b/arch/mips/kernel/Makefile +@@ -82,6 +82,7 @@ +  + obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o + obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o ++obj-$(CONFIG_MIPS_MACHINE)	+= mips_machine.o +  + CFLAGS_cpu-bugs64.o	= $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi) +  +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -614,6 +614,7 @@ +  + endchoice +  ++source "arch/mips/ar71xx/Kconfig" + source "arch/mips/au1000/Kconfig" + source "arch/mips/basler/excite/Kconfig" + source "arch/mips/jazz/Kconfig" +@@ -787,6 +788,9 @@ + config SYNC_R4K + 	bool +  ++config MIPS_MACHINE ++	def_bool n ++ + config NO_IOPORT + 	def_bool n +  diff --git a/target/linux/ar71xx/patches-2.6.27/901-get_c0_compare_irq_function.patch b/target/linux/ar71xx/patches-2.6.27/901-get_c0_compare_irq_function.patch new file mode 100644 index 000000000..52044c957 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/901-get_c0_compare_irq_function.patch @@ -0,0 +1,29 @@ +--- a/arch/mips/kernel/traps.c ++++ b/arch/mips/kernel/traps.c +@@ -45,6 +45,7 @@ + #include <asm/mmu_context.h> + #include <asm/types.h> + #include <asm/stacktrace.h> ++#include <asm/time.h> +  + extern void check_wait(void); + extern asmlinkage void r4k_wait(void); +@@ -1482,6 +1483,8 @@ + 	 */ + 	if (cpu_has_mips_r2) { + 		cp0_compare_irq = (read_c0_intctl() >> 29) & 7; ++		if (get_c0_compare_irq) ++			cp0_compare_irq = get_c0_compare_irq(); + 		cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7; + 		if (cp0_perfcount_irq == cp0_compare_irq) + 			cp0_perfcount_irq = -1; +--- a/include/asm-mips/time.h ++++ b/include/asm-mips/time.h +@@ -53,6 +53,7 @@ + #ifdef CONFIG_CEVT_R4K + extern int mips_clockevent_init(void); + extern unsigned int __weak get_c0_compare_int(void); ++extern unsigned int __weak get_c0_compare_irq(void); + #else + static inline int mips_clockevent_init(void) + { diff --git a/target/linux/ar71xx/patches-2.6.27/902-mips_clocksource_init_war.patch b/target/linux/ar71xx/patches-2.6.27/902-mips_clocksource_init_war.patch new file mode 100644 index 000000000..bdf0d0fb6 --- /dev/null +++ b/target/linux/ar71xx/patches-2.6.27/902-mips_clocksource_init_war.patch @@ -0,0 +1,65 @@ +--- a/arch/mips/kernel/cevt-r4k.c ++++ b/arch/mips/kernel/cevt-r4k.c +@@ -13,6 +13,22 @@ + #include <asm/smtc_ipi.h> + #include <asm/time.h> +  ++/* ++ * Compare interrupt can be routed and latched outside the core, ++ * so a single execution hazard barrier may not be enough to give ++ * it time to clear as seen in the Cause register.  4 time the ++ * pipeline depth seems reasonably conservative, and empirically ++ * works better in configurations with high CPU/bus clock ratios. ++ */ ++ ++#define compare_change_hazard() \ ++	do { \ ++		irq_disable_hazard(); \ ++		irq_disable_hazard(); \ ++		irq_disable_hazard(); \ ++		irq_disable_hazard(); \ ++	} while (0) ++ + static int mips_next_event(unsigned long delta, +                            struct clock_event_device *evt) + { +@@ -28,6 +44,7 @@ + 	cnt = read_c0_count(); + 	cnt += delta; + 	write_c0_compare(cnt); ++	compare_change_hazard(); + 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; + #ifdef CONFIG_MIPS_MT_SMTC + 	evpe(vpflags); +@@ -187,7 +204,7 @@ + 	 */ + 	if (c0_compare_int_pending()) { + 		write_c0_compare(read_c0_count()); +-		irq_disable_hazard(); ++		compare_change_hazard(); + 		if (c0_compare_int_pending()) + 			return 0; + 	} +@@ -196,7 +213,7 @@ + 		cnt = read_c0_count(); + 		cnt += delta; + 		write_c0_compare(cnt); +-		irq_disable_hazard(); ++		compare_change_hazard(); + 		if ((int)(read_c0_count() - cnt) < 0) + 		    break; + 		/* increase delta if the timer was already expired */ +@@ -205,11 +222,12 @@ + 	while ((int)(read_c0_count() - cnt) <= 0) + 		;	/* Wait for expiry  */ +  ++	compare_change_hazard(); + 	if (!c0_compare_int_pending()) + 		return 0; +  + 	write_c0_compare(read_c0_count()); +-	irq_disable_hazard(); ++	compare_change_hazard(); + 	if (c0_compare_int_pending()) + 		return 0; +  | 
