diff options
Diffstat (limited to 'target/linux/package/switch')
| -rw-r--r-- | target/linux/package/switch/Config.in | 11 | ||||
| -rw-r--r-- | target/linux/package/switch/Makefile | 37 | ||||
| -rw-r--r-- | target/linux/package/switch/ipkg/kmod-switch.control | 4 | ||||
| -rw-r--r-- | target/linux/package/switch/src/Makefile | 19 | ||||
| -rw-r--r-- | target/linux/package/switch/src/etc53xx.h | 620 | ||||
| -rw-r--r-- | target/linux/package/switch/src/gpio.h | 45 | ||||
| -rw-r--r-- | target/linux/package/switch/src/switch-adm.c | 571 | ||||
| -rw-r--r-- | target/linux/package/switch/src/switch-core.c | 466 | ||||
| -rw-r--r-- | target/linux/package/switch/src/switch-core.h | 59 | ||||
| -rw-r--r-- | target/linux/package/switch/src/switch-robo.c | 478 |
10 files changed, 0 insertions, 2310 deletions
diff --git a/target/linux/package/switch/Config.in b/target/linux/package/switch/Config.in deleted file mode 100644 index 0ff2aa1ab..000000000 --- a/target/linux/package/switch/Config.in +++ /dev/null @@ -1,11 +0,0 @@ -config PACKAGE_KMOD_SWITCH - prompt "kmod-switch....................... Kernel driver for ROBO and ADMTEK SWITCH" - tristate - default y if LINUX_2_6_BRCM || LINUX_2_4_BRCM - default m if DEVEL - default n - help - Kernel driver for ROBO and ADMTEK switches. - - http://www.openwrt.org - diff --git a/target/linux/package/switch/Makefile b/target/linux/package/switch/Makefile deleted file mode 100644 index 812fccb2c..000000000 --- a/target/linux/package/switch/Makefile +++ /dev/null @@ -1,37 +0,0 @@ -# $Id$ - -include $(TOPDIR)/rules.mk -include ../../rules.mk - -PKG_NAME := kmod-switch -PKG_RELEASE := 1 -PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) - -include $(TOPDIR)/package/rules.mk - -$(eval $(call PKG_template,KMOD_SWITCH,$(PKG_NAME),$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE)))) - -$(PKG_BUILD_DIR)/.prepared: - mkdir -p $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ - touch $@ - -$(PKG_BUILD_DIR)/.configured: - touch $@ - -$(PKG_BUILD_DIR)/.built: - $(MAKE) -C "$(LINUX_DIR)" \ - CROSS_COMPILE="$(TARGET_CROSS)" \ - ARCH="$(LINUX_KARCH)" \ - PATH="$(TARGET_PATH)" \ - SUBDIRS="$(PKG_BUILD_DIR)" \ - EXTRA_CFLAGS="-DBCMGPIO2" \ - modules - touch $@ - -$(IPKG_KMOD_SWITCH): - install -m0755 -d $(IDIR_KMOD_SWITCH)/lib/modules/$(LINUX_VERSION) - $(CP) $(PKG_BUILD_DIR)/*.$(LINUX_KMOD_SUFFIX) \ - $(IDIR_KMOD_SWITCH)/lib/modules/$(LINUX_VERSION) - $(IPKG_BUILD) $(IDIR_KMOD_SWITCH) $(PACKAGE_DIR) - diff --git a/target/linux/package/switch/ipkg/kmod-switch.control b/target/linux/package/switch/ipkg/kmod-switch.control deleted file mode 100644 index db8a36843..000000000 --- a/target/linux/package/switch/ipkg/kmod-switch.control +++ /dev/null @@ -1,4 +0,0 @@ -Package: kmod-switch -Priority: optional -Section: sys -Description: switch driver for robo/admtek switch diff --git a/target/linux/package/switch/src/Makefile b/target/linux/package/switch/src/Makefile deleted file mode 100644 index 4c5f911ea..000000000 --- a/target/linux/package/switch/src/Makefile +++ /dev/null @@ -1,19 +0,0 @@ -# $Id$ -# -# Makefile for switch driver -# -# Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org> -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License -# as published by the Free Software Foundation; either version -# 2 of the License, or (at your option) any later version. -# - -obj-m := switch-core.o switch-adm.o switch-robo.o - -ifeq ($(MAKING_MODULES),1) -export-objs := switch-core.o - --include $(TOPDIR)/Rules.make -endif diff --git a/target/linux/package/switch/src/etc53xx.h b/target/linux/package/switch/src/etc53xx.h deleted file mode 100644 index 12d94a5d0..000000000 --- a/target/linux/package/switch/src/etc53xx.h +++ /dev/null @@ -1,620 +0,0 @@ -/* - * Broadcom Home Gateway Reference Design - * BCM53xx Register definitions - * - * Copyright 2004, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * $Id: etc53xx.h,v 1.1 2005/05/14 13:15:46 nbd Exp $ - */ - -#ifndef __BCM535M_H_ -#define __BCM535M_H_ - -/* ROBO embedded device type */ -#define ROBO_DEV_5380 1 -#define ROBO_DEV_5365 2 -#define ROBO_DEV_5350 3 - -/* BCM5325m GLOBAL PAGE REGISTER MAP */ -#ifndef _CFE_ -#pragma pack(1) -#endif - -/* BCM5325m Serial Management Port (SMP) Page offsets */ -#define ROBO_CTRL_PAGE 0x00 /* Control registers */ -#define ROBO_STAT_PAGE 0x01 /* Status register */ -#define ROBO_MGMT_PAGE 0x02 /* Management Mode registers */ -#define ROBO_MIB_AC_PAGE 0x03 /* MIB Autocast registers */ -#define ROBO_ARLCTRL_PAGE 0x04 /* ARL Control Registers */ -#define ROBO_ARLIO_PAGE 0x05 /* ARL Access Registers */ -#define ROBO_FRAMEBUF_PAGE 0x06 /* Management frame access registers */ -#define ROBO_MEM_ACCESS_PAGE 0x08 /* Memory access registers */ - -/* PHY Registers */ -#define ROBO_PORT0_MII_PAGE 0x10 /* Port 0 MII Registers */ -#define ROBO_PORT1_MII_PAGE 0x11 /* Port 1 MII Registers */ -#define ROBO_PORT2_MII_PAGE 0x12 /* Port 2 MII Registers */ -#define ROBO_PORT3_MII_PAGE 0x13 /* Port 3 MII Registers */ -#define ROBO_PORT4_MII_PAGE 0x14 /* Port 4 MII Registers */ -/* (start) registers only for BCM5380 */ -#define ROBO_PORT5_MII_PAGE 0x15 /* Port 5 MII Registers */ -#define ROBO_PORT6_MII_PAGE 0x16 /* Port 6 MII Registers */ -#define ROBO_PORT7_MII_PAGE 0x17 /* Port 7 MII Registers */ -/* (end) registers only for BCM5380 */ -#define ROBO_IM_PORT_PAGE 0x18 /* Inverse MII Port (to EMAC) */ -#define ROBO_ALL_PORT_PAGE 0x19 /* All ports MII Registers (broadcast)*/ - -/* MAC Statistics registers */ -#define ROBO_PORT0_MIB_PAGE 0x20 /* Port 0 10/100 MIB Statistics */ -#define ROBO_PORT1_MIB_PAGE 0x21 /* Port 1 10/100 MIB Statistics */ -#define ROBO_PORT2_MIB_PAGE 0x22 /* Port 2 10/100 MIB Statistics */ -#define ROBO_PORT3_MIB_PAGE 0x23 /* Port 3 10/100 MIB Statistics */ -#define ROBO_PORT4_MIB_PAGE 0x24 /* Port 4 10/100 MIB Statistics */ -/* (start) registers only for BCM5380 */ -#define ROBO_PORT5_MIB_PAGE 0x25 /* Port 5 10/100 MIB Statistics */ -#define ROBO_PORT6_MIB_PAGE 0x26 /* Port 6 10/100 MIB Statistics */ -#define ROBO_PORT7_MIB_PAGE 0x27 /* Port 7 10/100 MIB Statistics */ -/* (end) registers only for BCM5380 */ -#define ROBO_IM_PORT_MIB_PAGE 0x28 /* Inverse MII Port MIB Statistics */ - -/* Quality of Service (QoS) Registers */ -#define ROBO_QOS_PAGE 0x30 /* QoS Registers */ - -/* VLAN Registers */ -#define ROBO_VLAN_PAGE 0x34 /* VLAN Registers */ - -/* Note SPI Data/IO Registers not used */ -#define ROBO_SPI_DATA_IO_0_PAGE 0xf0 /* SPI Data I/O 0 */ -#define ROBO_SPI_DATA_IO_1_PAGE 0xf1 /* SPI Data I/O 1 */ -#define ROBO_SPI_DATA_IO_2_PAGE 0xf2 /* SPI Data I/O 2 */ -#define ROBO_SPI_DATA_IO_3_PAGE 0xf3 /* SPI Data I/O 3 */ -#define ROBO_SPI_DATA_IO_4_PAGE 0xf4 /* SPI Data I/O 4 */ -#define ROBO_SPI_DATA_IO_5_PAGE 0xf5 /* SPI Data I/O 5 */ -#define ROBO_SPI_DATA_IO_6_PAGE 0xf6 /* SPI Data I/O 6 */ -#define ROBO_SPI_DATA_IO_7_PAGE 0xf7 /* SPI Data I/O 7 */ - -#define ROBO_SPI_STATUS_PAGE 0xfe /* SPI Status Registers */ -#define ROBO_PAGE_PAGE 0xff /* Page Registers */ - - -/* BCM5325m CONTROL PAGE (0x00) REGISTER MAP : 8bit (byte) registers */ -typedef struct _ROBO_PORT_CTRL_STRUC -{ - unsigned char rx_disable:1; /* rx disable */ - unsigned char tx_disable:1; /* tx disable */ - unsigned char rsvd:3; /* reserved */ - unsigned char stp_state:3; /* spanning tree state */ -} ROBO_PORT_CTRL_STRUC; - -#define ROBO_PORT0_CTRL 0x00 /* 10/100 Port 0 Control */ -#define ROBO_PORT1_CTRL 0x01 /* 10/100 Port 1 Control */ -#define ROBO_PORT2_CTRL 0x02 /* 10/100 Port 2 Control */ -#define ROBO_PORT3_CTRL 0x03 /* 10/100 Port 3 Control */ -#define ROBO_PORT4_CTRL 0x04 /* 10/100 Port 4 Control */ -/* (start) registers only for BCM5380 */ -#define ROBO_PORT5_CTRL 0x05 /* 10/100 Port 5 Control */ -#define ROBO_PORT6_CTRL 0x06 /* 10/100 Port 6 Control */ -#define ROBO_PORT7_CTRL 0x07 /* 10/100 Port 7 Control */ -/* (end) registers only for BCM5380 */ -#define ROBO_IM_PORT_CTRL 0x08 /* 10/100 Port 8 Control */ -#define ROBO_SMP_CTRL 0x0a /* SMP Control register */ -#define ROBO_SWITCH_MODE 0x0b /* Switch Mode Control */ -#define ROBO_PORT_OVERRIDE_CTRL 0x0e /* Port state override */ -#define ROBO_PORT_OVERRIDE_RVMII (1<<4) /* Bit 4 enables RvMII */ -#define ROBO_PD_MODE_CTRL 0x0f /* Power-down mode control */ -#define ROBO_IP_MULTICAST_CTRL 0x21 /* IP Multicast control */ - -/* BCM5325m STATUS PAGE (0x01) REGISTER MAP : 16bit/48bit registers */ -#define ROBO_HALF_DUPLEX 0 -#define ROBO_FULL_DUPLEX 1 - -#define ROBO_LINK_STAT_SUMMARY 0x00 /* Link Status Summary: 16bit */ -#define ROBO_LINK_STAT_CHANGE 0x02 /* Link Status Change: 16bit */ -#define ROBO_SPEED_STAT_SUMMARY 0x04 /* Port Speed Summary: 16bit*/ -#define ROBO_DUPLEX_STAT_SUMMARY 0x06 /* Duplex Status Summary: 16bit */ -#define ROBO_PAUSE_STAT_SUMMARY 0x08 /* PAUSE Status Summary: 16bit */ -#define ROBO_SOURCE_ADDR_CHANGE 0x0C /* Source Address Change: 16bit */ -#define ROBO_LSA_PORT0 0x10 /* Last Source Addr, Port 0: 48bits*/ -#define ROBO_LSA_PORT1 0x16 /* Last Source Addr, Port 1: 48bits*/ -#define ROBO_LSA_PORT2 0x1c /* Last Source Addr, Port 2: 48bits*/ -#define ROBO_LSA_PORT3 0x22 /* Last Source Addr, Port 3: 48bits*/ -#define ROBO_LSA_PORT4 0x28 /* Last Source Addr, Port 4: 48bits*/ -#define ROBO_LSA_IM_PORT 0x40 /* Last Source Addr, IM Port: 48bits*/ - -/* BCM5325m MANAGEMENT MODE REGISTERS (0x02) REGISTER MAP: 8/48 bit regs*/ -typedef struct _ROBO_GLOBAL_CONFIG_STRUC -{ - unsigned char resetMIB:1; /* reset MIB counters */ - unsigned char rxBPDU:1; /* receive BDPU enable */ - unsigned char rsvd1:2; /* reserved */ - unsigned char MIBacHdrCtrl:1; /* MIB autocast header control */ - unsigned char MIBac:1; /* MIB autocast enable */ - unsigned char frameMgmtPort:2; /* frame management port */ -} ROBO_GLOBAL_CONFIG_STRUC; -#define ROBO_GLOBAL_CONFIG 0x00 /* Global Management Config: 8bit*/ -#define ROBO_MGMT_PORT_ID 0x02 /* Management Port ID: 8bit*/ -#define ROBO_RMON_MIB_STEER 0x04 /* RMON Mib Steering: 16bit */ -#define ROBO_MIB_MODE_SELECT 0x04 /* MIB Mode select: 16bit (BCM5350) */ -#define ROBO_AGE_TIMER_CTRL 0x06 /* Age time control: 32bit */ -#define ROBO_MIRROR_CAP_CTRL 0x10 /* Mirror Capture : 16bit */ -#define ROBO_MIRROR_ING_CTRL 0x12 /* Mirror Ingress Control: 16bit */ -#define ROBO_MIRROR_ING_DIV_CTRL 0x14 /* Mirror Ingress Divider: 16bit */ -#define ROBO_MIRROR_ING_MAC_ADDR 0x16 /* Ingress Mirror MAC Addr: 48bit*/ -#define ROBO_MIRROR_EGR_CTRL 0x1c /* Mirror Egress Control: 16bit */ -#define ROBO_MIRROR_EGR_DIV_CTRL 0x1e /* Mirror Egress Divider: 16bit */ -#define ROBO_MIRROR_EGR_MAC_ADDR 0x20 /* Egress Mirror MAC Addr: 48bit*/ - -/* BCM5325m MIB AUTOCAST REGISTERS (0x03) REGISTER MAP: 8/16/48 bit regs */ -#define ROBO_MIB_AC_PORT 0x00 /* MIB Autocast Port: 16bit */ -#define ROBO_MIB_AC_HDR_PTR 0x02 /* MIB Autocast Header pointer:16bit*/ -#define ROBO_MIB_AC_HDR_LEN 0x04 /* MIB Autocast Header Len: 16bit */ -#define ROBO_MIB_AC_DA 0x06 /* MIB Autocast DA: 48bit */ -#define ROBO_MIB_AC_SA 0x0c /* MIB Autocast SA: 48bit */ -#define ROBO_MIB_AC_TYPE 0x12 /* MIB Autocast Type: 16bit */ -#define ROBO_MIB_AC_RATE 0x14 /* MIB Autocast Rate: 8bit */ -#define ROBO_GET_AC_RATE(secs) ((secs)*10) -#define ROBO_AC_RATE_MAX 0xff -#define ROBO_AC_RATE_DEFAULT 0x64 /* 10 secs */ -typedef struct _ROBO_MIB_AC_STRUCT -{ - unsigned char opcode:4; /* Tx MIB Autocast opcode */ - unsigned char portno:4; /* zero-based port no. */ - unsigned char portstate:8; /* port state */ - unsigned long long TxOctets; - unsigned int TxDropPkts; - unsigned int rsvd; - unsigned int TxBroadcastPkts; - unsigned int TxMulticastPkts; - unsigned int TxUnicastPkts; - unsigned int TxCollisions; - unsigned int TxSingleCollision; - unsigned int TxMultiCollision; - unsigned int TxDeferredTransmit; - unsigned int TxLateCollision; - unsigned int TxExcessiveCollision; - unsigned int TxFrameInDiscards; - unsigned int TxPausePkts; - unsigned int rsvd1[2]; - unsigned long long RxOctets; - unsigned int RxUndersizePkts; - unsigned int RxPausePkts; - unsigned int RxPkts64Octets; - unsigned int RxPkts64to127Octets; - unsigned int RxPkts128to255Octets; - unsigned int RxPkts256to511Octets; - unsigned int RxPkts512to1023Octets; - unsigned int RxPkts1024to1522Octets; - unsigned int RxOversizePkts; - unsigned int RxJabbers; - unsigned int RxAlignmentErrors; - unsigned int RxFCSErrors; - unsigned long long RxGoodOctets; - unsigned int RxDropPkts; - unsigned int RxUnicastPkts; - unsigned int RxMulticastPkts; - unsigned int RxBroadcastPkts; - unsigned int RxSAChanges; - unsigned int RxFragments; - unsigned int RxExcessSizeDisc; - unsigned int RxSymbolError; -} ROBO_MIB_AC_STRUCT; - -/* BCM5325m ARL CONTROL REGISTERS (0x04) REGISTER MAP: 8/16/48/64 bit regs */ -#define ROBO_ARL_CONFIG 0x00 /* ARL Global Configuration: 8bit*/ -#define ROBO_BPDU_MC_ADDR_REG 0x04 /* BPDU Multicast Address Reg:64bit*/ -#define ROBO_MULTIPORT_ADDR_1 0x10 /* Multiport Address 1: 48 bits*/ -#define ROBO_MULTIPORT_VECTOR_1 0x16 /* Multiport Vector 1: 16 bits */ -#define ROBO_MULTIPORT_ADDR_2 0x20 /* Multiport Address 2: 48 bits*/ -#define ROBO_MULTIPORT_VECTOR_2 0x26 /* Multiport Vector 2: 16 bits */ -#define ROBO_SECURE_SRC_PORT_MASK 0x30 /* Secure Source Port Mask: 16 bits*/ -#define ROBO_SECURE_DST_PORT_MASK 0x32 /* Secure Dest Port Mask: 16 bits */ - - -/* BCM5325m ARL IO REGISTERS (0x05) REGISTER MAP: 8/16/48/64 bit regs */ -#define ARL_TABLE_WRITE 0 /* for read/write state in control reg */ -#define ARL_TABLE_READ 1 /* for read/write state in control reg */ -#ifdef BCM5380 -#define ARL_VID_BYTES 2 /* number of bytes for VID */ -#else -#define ARL_VID_BYTES 1 /* number of bytes for VID */ -#endif -typedef struct _ROBO_ARL_RW_CTRL_STRUC -{ - unsigned char ARLrw:1; /* ARL read/write (1=read) */ - unsigned char rsvd:6; /* reserved */ - unsigned char ARLStart:1; /* ARL start/done (1=start) */ -} ROBO_ARL_RW_CTRL_STRUC; -typedef struct _ROBO_ARL_SEARCH_CTRL_STRUC -{ - unsigned char valid:1; /* ARL search result valid */ - unsigned char rsvd:6; /* reserved */ - unsigned char ARLStart:1; /* ARL start/done (1=start) */ -} ROBO_ARL_SEARCH_CTRL_STRUC; -typedef struct _ROBO_ARL_ENTRY_CTRL_STRUC -{ - unsigned char portID:4; /* port id */ - unsigned char chipID:2; /* chip id */ - unsigned char rsvd:5; /* reserved */ - unsigned char prio:2; /* priority */ - unsigned char age:1; /* age */ - unsigned char staticEn:1; /* static */ - unsigned char valid:1; /* valid */ -} ROBO_ARL_ENTRY_CTRL_STRUC; -typedef struct _ROBO_ARL_SEARCH_RESULT_CTRL_STRUC -{ - unsigned char portID:4; /* port id */ - unsigned char rsvd:1; /* reserved */ - unsigned char vid:8; /* vlan id */ - unsigned char age:1; /* age */ - unsigned char staticEn:1; /* static */ - unsigned char valid:1; /* valid */ -} ROBO_ARL_SEARCH_RESULT_CTRL_STRUC; -typedef struct _ROBO_ARL_ENTRY_MAC_STRUC -{ - unsigned char macBytes[6]; /* MAC address */ -} ROBO_ARL_ENTRY_MAC_STRUC; - -typedef struct _ROBO_ARL_ENTRY_STRUC -{ - ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */ - ROBO_ARL_ENTRY_CTRL_STRUC ctrl; /* control bits */ -} ROBO_ARL_ENTRY_STRUC; - -typedef struct _ROBO_ARL_SEARCH_RESULT_STRUC -{ - ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */ - ROBO_ARL_SEARCH_RESULT_CTRL_STRUC ctrl; /* control bits */ -} ROBO_ARL_SEARCH_RESULT_STRUC; - -/* multicast versions of ARL entry structs */ -typedef struct _ROBO_ARL_ENTRY_MCAST_CTRL_STRUC -{ - unsigned int portMask:12;/* multicast port mask */ - unsigned char prio:1; /* priority */ - unsigned char gigPort:1; /* gigabit port 1 mask */ - unsigned char staticEn:1; /* static */ - unsigned char valid:1; /* valid */ -} ROBO_ARL_ENTRY_MCAST_CTRL_STRUC; -typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC -{ - unsigned int portMask:13; /* multicast port mask */ - unsigned char age:1; /* age */ - unsigned char staticEn:1; /* static */ - unsigned char valid:1; /* valid */ -} ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC; -/* BCM5350 extension register */ -typedef struct _ROBO_ARL_SEARCH_RESULT_EXTENSION -{ - unsigned int prio:2; /* priority */ - unsigned int portMask:1; /* MSB (MII) of port mask for multicast */ - unsigned int reserved:5; -} ROBO_ARL_SEARCH_RESULT_EXTENSION; - -typedef struct _ROBO_ARL_ENTRY_MCAST_STRUC -{ - ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */ - ROBO_ARL_ENTRY_MCAST_CTRL_STRUC ctrl; /* control bits */ -} ROBO_ARL_ENTRY_MCAST_STRUC; -typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_STRUC -{ - ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */ - ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC ctrl; /* control bits */ -} ROBO_ARL_SEARCH_RESULT_MCAST_STRUC; - -#define ROBO_ARL_RW_CTRL 0x00 /* ARL Read/Write Control : 8bit */ -#define ROBO_ARL_MAC_ADDR_IDX 0x02 /* MAC Address Index: 48bit */ -#define ROBO_ARL_VID_TABLE_IDX 0x08 /* VID Table Address Index: 8bit */ -#define ROBO_ARL_ENTRY0 0x10 /* ARL Entry 0 : 64 bit */ -#define ROBO_ARL_ENTRY1 0x18 /* ARL Entry 1 : 64 bit */ -#define ROBO_ARL_SEARCH_CTRL 0x20 /* ARL Search Control: 8bit */ -#define ROBO_ARL_SEARCH_ADDR 0x22 /* ARL Search Address: 16bit */ -#define ROBO_ARL_SEARCH_RESULT 0x24 /* ARL Search Result: 64bit */ -#define ROBO_ARL_SEARCH_RESULT_EXT 0x2c /* ARL Search Result Extension (5350): 8bit */ -#define ROBO_ARL_VID_ENTRY0 0x30 /* ARL VID Entry 0: 64bit */ -#define ROBO_ARL_VID_ENTRY1 0x32 /* ARL VID Entry 1: 64bit */ - -/* BCM5325m MANAGEMENT FRAME REGISTERS (0x6) REGISTER MAP: 8/16 bit regs */ -#define ROBO_MGMT_FRAME_RD_DATA 0x00 /* Management Frame Read Data :8bit*/ -#define ROBO_MGMT_FRAME_WR_DATA 0x01 /* Management Frame Write Data:8bit*/ -#define ROBO_MGMT_FRAME_WR_CTRL 0x02 /* Write Control: 16bit */ -#define ROBO_MGMT_FRAME_RD_STAT 0x04 /* Read Status: 16bit */ - -/* BCM5325m MEMORY ACCESS REGISTERS (Page 0x08) REGISTER MAP: 32 bit regs */ -#define MEM_TABLE_READ 1 /* for read/write state in mem access reg */ -#define MEM_TABLE_WRITE 0 /* for read/write state in mem access reg */ -#define MEM_TABLE_ACCESS_START 1 /* for mem access read/write start */ -#define MEM_TABLE_ACCESS_DONE 0 /* for mem access read/write done */ -#define VLAN_TABLE_ADDR 0x3800 /* BCM5380 only */ -#ifdef BCM5380 -#define NUM_ARL_TABLE_ENTRIES 4096 /* number of entries in ARL table */ -#define NUM_VLAN_TABLE_ENTRIES 2048 /* number of entries in VLAN table */ -#define ARL_TABLE_ADDR 0 /* offset of ARL table start */ -#else -#define NUM_ARL_TABLE_ENTRIES 2048 /* number of entries in ARL table */ -#define NUM_VLAN_TABLE_ENTRIES 256 /* number of entries in VLAN table */ -#define ARL_TABLE_ADDR 0x3800 /* offset of ARL table start */ -/* corresponding values for 5350 */ -#define NUM_ARL_TABLE_ENTRIES_5350 1024 /* number of entries in ARL table (5350) */ -#define NUM_VLAN_TABLE_ENTRIES_5350 16 /* number of entries in VLAN table */ -#define ARL_TABLE_ADDR_5350 0x1c00 /* offset of ARL table start (5350) */ -#endif -typedef struct _ROBO_MEM_ACCESS_CTRL_STRUC -{ - unsigned int memAddr:14; /* 64-bit memory address */ - unsigned char rsvd:4; /* reserved */ - unsigned char readEn:1; /* read enable (0 == write) */ - unsigned char startDone:1;/* memory access start/done */ - unsigned int rsvd1:12; /* reserved */ -} ROBO_MEM_ACCESS_CTRL_STRUC; -typedef struct _ROBO_MEM_ACCESS_DATA_STRUC -{ - unsigned int memData[2]; /* 64-bit data */ - unsigned short rsvd; /* reserved */ -} ROBO_MEM_ACCESS_DATA_STRUC; - -#ifdef BCM5380 -typedef struct _ROBO_ARL_TABLE_DATA_STRUC -{ - unsigned char MACaddr[6]; /* MAC addr */ - unsigned int portID:4; /* port ID */ - unsigned int chipID:2; /* chip ID */ - unsigned int rsvd:6; /* reserved */ - unsigned int highPrio:1; /* high priority address */ - unsigned int age:1; /* entry accessed/learned since ageing process */ - unsigned int staticAddr:1;/* entry is static */ - unsigned int valid:1; /* entry is valid */ - unsigned int vid:12; /* vlan id */ - unsigned int rsvd2:4; /* reserved */ -} ROBO_ARL_TABLE_DATA_STRUC; -#else -typedef struct _ROBO_ARL_TABLE_DATA_STRUC -{ - unsigned char MACaddr[6]; /* MAC addr */ - unsigned int portID:4; /* port ID */ - unsigned int chipID:2; /* chip ID */ - unsigned int rsvd:7; /* reserved */ - unsigned int age:1; /* entry accessed/learned since ageing process */ - unsigned int staticAddr:1;/* entry is static */ - unsigned int valid:1; /* entry is valid */ -} ROBO_ARL_TABLE_DATA_STRUC; -#endif - -/* multicast format*/ -typedef struct _ROBO_ARL_TABLE_MCAST_DATA_STRUC -{ - unsigned char MACaddr[6]; /* MAC addr */ - unsigned int portMask:12;/* multicast port mask */ - unsigned char prio:1; /* priority */ - unsigned char gigPort:1; /* gigabit port 1 mask */ - unsigned char staticEn:1; /* static */ - unsigned char valid:1; /* valid */ - unsigned int vid:12; /* vlan id */ - unsigned int rsvd2:4; /* reserved */ -} ROBO_ARL_TABLE_MCAST_DATA_STRUC; -#define ROBO_MEM_ACCESS_CTRL 0x00 /* Memory Read/Write Control :32bit*/ -#define ROBO_MEM_ACCESS_DATA 0x04 /* Memory Read/Write Data:64bit*/ - -/* BCM5325m SWITCH PORT (0x10-18) REGISTER MAP: 8/16 bit regs */ -typedef struct _ROBO_MII_CTRL_STRUC -{ - unsigned char rsvd:8; /* reserved */ - unsigned char duplex:1; /* duplex mode */ - unsigned char restartAN:1;/* restart auto-negotiation */ - unsigned char rsvd1:1; /* reserved */ - unsigned char powerDown:1;/* power down */ - unsigned char ANenable:1; /* auto-negotiation enable */ - unsigned char speed:1; /* forced speed selection */ - unsigned char loopback:1; /* loopback */ - unsigned char reset:1; /* reset */ -} ROBO_MII_CTRL_STRUC; -typedef struct _ROBO_MII_AN_ADVERT_STRUC -{ - unsigned char selector:5; /* advertise selector field */ - unsigned char T10BaseT:1; /* advertise 10BaseT */ - unsigned char T10BaseTFull:1; /* advertise 10BaseT, full duplex */ - unsigned char T100BaseX:1; /* advertise 100BaseX */ - unsigned char T100BaseXFull:1;/* advertise 100BaseX full duplex */ - unsigned char noT4:1; /* do not advertise T4 */ - unsigned char pause:1; /* advertise pause for full duplex */ - unsigned char rsvd:2; /* reserved */ - unsigned char remoteFault:1; /* transmit remote fault */ - unsigned char rsvd1:1; /* reserved */ - unsigned char nextPage:1; /* nex page operation supported */ -} ROBO_MII_AN_ADVERT_STRUC; -#define ROBO_MII_CTRL 0x00 /* Port MII Control */ -#define ROBO_MII_STAT 0x02 /* Port MII Status */ -/* Fields of link status register */ -#define ROBO_MII_STAT_JABBER (1<<1) /* Jabber detected */ -#define ROBO_MII_STAT_LINK (1<<2) /* Link status */ - -#define ROBO_MII_PHYID_HI 0x04 /* Port PHY ID High */ -#define ROBO_MII_PHYID_LO 0x06 /* Port PHY ID Low */ -#define ROBO_MII_ANA_REG 0x08 /* MII Auto-Neg Advertisement */ -#define ROBO_MII_ANP_REG 0x0a /* MII Auto-Neg Partner Ability */ -#define ROBO_MII_AN_EXP_REG 0x0c /* MII Auto-Neg Expansion */ -#define ROBO_MII_AN_NP_REG 0x0e /* MII next page */ -#define ROBO_MII_ANP_NP_REG 0x10 /* MII Partner next page */ -#define ROBO_MII_100BX_AUX_CTRL 0x20 /* 100BASE-X Auxiliary Control */ -#define ROBO_MII_100BX_AUX_STAT 0x22 /* 100BASE-X Auxiliary Status */ -#define ROBO_MII_100BX_RCV_ERR_CTR 0x24 /* 100BASE-X Receive Error Ctr */ -#define ROBO_MII_100BX_RCV_FS_ERR 0x26 /* 100BASE-X Rcv False Sense Ctr */ -#define ROBO_MII_AUX_CTRL 0x30 /* Auxiliary Control/Status */ -/* Fields of Auxiliary control register */ -#define ROBO_MII_AUX_CTRL_FD (1<<0) /* Full duplex link detected*/ -#define ROBO_MII_AUX_CTRL_SP100 (1<<1) /* Speed 100 indication */ -#define ROBO_MII_AUX_STATUS 0x32 /* Aux Status Summary */ -#define ROBO_MII_CONN_STATUS 0x34 /* Aux Connection Status */ -#define ROBO_MII_AUX_MODE2 0x36 /* Aux Mode 2 */ -#define ROBO_MII_AUX_ERR_STATUS 0x38 /* Aux Error and General Status */ -#define ROBO_MII_AUX_MULTI_PHY 0x3c /* Aux Multiple PHY Register*/ -#define ROBO_MII_BROADCOM_TEST 0x3e /* Broadcom Test Register */ - - -/* BCM5325m PORT MIB REGISTERS (Pages 0x20-0x24,0x28) REGISTER MAP: 64/32 */ -/* Tranmit Statistics */ -#define ROBO_MIB_TX_OCTETS 0x00 /* 64b: TxOctets */ -#define ROBO_MIB_TX_DROP_PKTS 0x08 /* 32b: TxDropPkts */ -#define ROBO_MIB_TX_BC_PKTS 0x10 /* 32b: TxBroadcastPkts */ -#define ROBO_MIB_TX_MC_PKTS 0x14 /* 32b: TxMulticastPkts */ -#define ROBO_MIB_TX_UC_PKTS 0x18 /* 32b: TxUnicastPkts */ -#define ROBO_MIB_TX_COLLISIONS 0x1c /* 32b: TxCollisions */ -#define ROBO_MIB_TX_SINGLE_COLLISIONS 0x20 /* 32b: TxSingleCollision */ -#define ROBO_MIB_TX_MULTI_COLLISIONS 0x24 /* 32b: TxMultiCollision */ -#define ROBO_MIB_TX_DEFER_TX 0x28 /* 32b: TxDeferred Transmit */ -#define ROBO_MIB_TX_LATE_COLLISIONS 0x2c /* 32b: TxLateCollision */ -#define ROBO_MIB_EXCESS_COLLISIONS 0x30 /* 32b: TxExcessiveCollision*/ -#define ROBO_MIB_FRAME_IN_DISCARDS 0x34 /* 32b: TxFrameInDiscards */ -#define ROBO_MIB_TX_PAUSE_PKTS 0x38 /* 32b: TxPausePkts */ - -/* Receive Statistics */ -#define ROBO_MIB_RX_OCTETS 0x44 /* 64b: RxOctets */ -#define ROBO_MIB_RX_UNDER_SIZE_PKTS 0x4c /* 32b: RxUndersizePkts(runts)*/ -#define ROBO_MIB_RX_PAUSE_PKTS 0x50 /* 32b: RxPausePkts */ -#define ROBO_MIB_RX_PKTS_64 0x54 /* 32b: RxPkts64Octets */ -#define ROBO_MIB_RX_PKTS_65_TO_127 0x58 /* 32b: RxPkts64to127Octets*/ -#define ROBO_MIB_RX_PKTS_128_TO_255 0x5c /* 32b: RxPkts128to255Octets*/ -#define ROBO_MIB_RX_PKTS_256_TO_511 0x60 /* 32b: RxPkts256to511Octets*/ -#define ROBO_MIB_RX_PKTS_512_TO_1023 0x64 /* 32b: RxPkts512to1023Octets*/ -#define ROBO_MIB_RX_PKTS_1024_TO_1522 0x68 /* 32b: RxPkts1024to1522Octets*/ -#define ROBO_MIB_RX_OVER_SIZE_PKTS 0x6c /* 32b: RxOversizePkts*/ -#define ROBO_MIB_RX_JABBERS 0x70 /* 32b: RxJabbers*/ -#define ROBO_MIB_RX_ALIGNMENT_ERRORS 0x74 /* 32b: RxAlignmentErrors*/ -#define ROBO_MIB_RX_FCS_ERRORS 0x78 /* 32b: RxFCSErrors */ -#define ROBO_MIB_RX_GOOD_OCTETS 0x7c /* 32b: RxGoodOctets */ -#define ROBO_MIB_RX_DROP_PKTS 0x84 /* 32b: RxDropPkts */ -#define ROBO_MIB_RX_UC_PKTS 0x88 /* 32b: RxUnicastPkts */ -#define ROBO_MIB_RX_MC_PKTS 0x8c /* 32b: RxMulticastPkts */ -#define ROBO_MIB_RX_BC_PKTS 0x90 /* 32b: RxBroadcastPkts */ -#define ROBO_MIB_RX_SA_CHANGES 0x94 /* 32b: RxSAChanges */ -#define ROBO_MIB_RX_FRAGMENTS 0x98 /* 32b: RxFragments */ -#define ROBO_MIB_RX_EXCESS_SZ_DISC 0x9c /* 32b: RxExcessSizeDisc*/ -#define ROBO_MIB_RX_SYMBOL_ERROR 0xa0 /* 32b: RxSymbolError */ - -/* BCM5350 MIB Statistics */ -/* Group 0 */ -#define ROBO_MIB_TX_GOOD_PKTS 0x00 /* 16b: TxGoodPkts */ -#define ROBO_MIB_TX_UNICAST_PKTS 0x02 /* 16b: TxUnicastPkts */ -#define ROBO_MIB_RX_GOOD_PKTS 0x04 /* 16b: RxGoodPkts */ -#define ROBO_MIB_RX_GOOD_UNICAST_PKTS 0x06 /* 16b: RxGoodUnicastPkts */ -/* Group 1 */ -#define ROBO_MIB_TX_COLLISION 0x00 /* 16b: TxCollision */ -#define ROBO_MIB_TX_OCTETS_5350 0x02 /* 16b: TxOctets */ -#define ROBO_MIB_RX_FCS_ERRORS_5350 0x04 /* 16b: RxFCSErrors */ -#define ROBO_MIB_RX_GOOD_OCTETS_5350 0x06 /* 16b: RxGoodOctets */ - -/* BCM5325m QoS REGISTERS (Page 0x30) REGISTER MAP: 8/16 */ -#define ROBO_QOS_CTRL 0x00 /* 16b: QoS Control Register */ -#define ROBO_QOS_LOCAL_WEIGHT_CTRL 0x10 /* 8b: Local HQ/LQ Weight Register*/ -#define ROBO_QOS_CPU_WEIGHT_CTRL 0x12 /* 8b: CPU HQ/LQ Weight Register*/ -#define ROBO_QOS_PAUSE_ENA 0x13 /* 16b: Qos Pause Enable Register*/ -#define ROBO_QOS_PRIO_THRESHOLD 0x15 /* 8b: Priority Threshold Register*/ -#define ROBO_QOS_RESERVED 0x16 /* 8b: Qos Reserved Register */ - -/* BCM5325m VLAN REGISTERS (Page 0x34) REGISTER MAP: 8/16bit */ -typedef struct _ROBO_VLAN_CTRL0_STRUC -{ - unsigned char frameControlP:2; /* 802.1P frame control */ - unsigned char frameControlQ:2; /* 802.1Q frame control */ - unsigned char dropMissedVID:1; /* enable drop missed VID packet */ - unsigned char vidMacHash:1; /* VID_MAC hash enable */ - unsigned char vidMacCheck:1; /* VID_MAC check enable */ - unsigned char VLANen:1; /* 802.1Q VLAN enable */ -} ROBO_VLAN_CTRL0_STRUC; -#define VLAN_TABLE_WRITE 1 /* for read/write state in table access reg */ -#define VLAN_TABLE_READ 0 /* for read/write state in table access reg */ -#define VLAN_ID_HIGH_BITS 0 /* static high bits in table access reg */ -#define VLAN_ID_MAX 255 /* max VLAN id */ -#define VLAN_ID_MAX5350 15 /* max VLAN id (5350) */ -#define VLAN_ID_MASK VLAN_ID_MAX /* VLAN id mask */ -#ifdef BCM5380 -#define VLAN_UNTAG_SHIFT 13 /* for postioning untag bits in write reg */ -#define VLAN_VALID 0x4000000 /* valid bit in write reg */ -#else -#define VLAN_UNTAG_SHIFT 7 /* for postioning untag bits in write reg */ -#define VLAN_VALID 0x4000 /* valid bit in write reg */ -/* corresponding values for 5350 */ -#define VLAN_UNTAG_SHIFT_5350 6 /* for postioning untag bits in write reg */ -#define VLAN_VALID_5350 0x00100000 /* valid bit in write reg */ -#endif -typedef struct _ROBO_VLAN_TABLE_ACCESS_STRUC -{ - unsigned char VLANid:8; /* VLAN ID (low 8 bits) */ - unsigned char VLANidHi:4; /* VLAN ID (fixed upper portion) */ - unsigned char readWriteState:1; /* read/write state (write = 1) */ - volatile unsigned char readWriteEnable:1; /* table read/write enable */ - unsigned char rsvd:2; /* reserved */ -} ROBO_VLAN_TABLE_ACCESS_STRUC; -#ifdef BCM5380 -typedef struct _ROBO_VLAN_READ_WRITE_STRUC -{ - unsigned int VLANgroup:13;/* VLAN group mask */ - unsigned int VLANuntag:13;/* VLAN untag enable mask */ - unsigned char valid:1; /* valid */ - unsigned char rsvd:5; /* reserved */ -} ROBO_VLAN_READ_WRITE_STRUC; -#else -typedef struct _ROBO_VLAN_READ_WRITE_STRUC -{ - unsigned char VLANgroup:7; /* VLAN group mask */ - unsigned char VLANuntag:7; /* VLAN untag enable mask */ - unsigned char valid:1; /* valid */ - unsigned char rsvd:1; /* reserved */ -} ROBO_VLAN_READ_WRITE_STRUC; -typedef struct _ROBO_VLAN_READ_WRITE_STRUC_5350 -{ - unsigned char VLANgroup:6; /* VLAN group mask */ - unsigned char VLANuntag:6; /* VLAN untag enable mask */ - unsigned char highVID:8; /* upper bits of vid */ - unsigned char valid:1; /* valid */ - unsigned int rsvd:11; /* reserved */ -} ROBO_VLAN_READ_WRITE_STRUC_5350; -#endif -#define ROBO_VLAN_CTRL0 0x00 /* 8b: VLAN Control 0 Register */ -#define ROBO_VLAN_CTRL1 0x01 /* 8b: VLAN Control 1 Register */ -#define ROBO_VLAN_CTRL2 0x02 /* 8b: VLAN Control 2 Register */ -#define ROBO_VLAN_CTRL3 0x03 /* 8b: VLAN Control 3 Register */ -#define ROBO_VLAN_CTRL4 0x04 /* 8b: VLAN Control 4 Register */ -#define ROBO_VLAN_CTRL5 0x05 /* 8b: VLAN Control 5 Register */ -#define ROBO_VLAN_TABLE_ACCESS 0x08 /* 14b: VLAN Table Access Register */ -#define ROBO_VLAN_TABLE_ACCESS_5350 0x06 /* 14b: VLAN Table Access Register (5350) */ -#define ROBO_VLAN_WRITE 0x0a /* 15b: VLAN Write Register */ -#define ROBO_VLAN_WRITE_5350 0x08 /* 15b: VLAN Write Register (5350) */ -#define ROBO_VLAN_READ 0x0c /* 15b: VLAN Read Register */ -#define ROBO_VLAN_PORT0_DEF_TAG 0x10 /* 16b: VLAN Port 0 Default Tag Register */ -#define ROBO_VLAN_PORT1_DEF_TAG 0x12 /* 16b: VLAN Port 1 Default Tag Register */ -#define ROBO_VLAN_PORT2_DEF_TAG 0x14 /* 16b: VLAN Port 2 Default Tag Register */ -#define ROBO_VLAN_PORT3_DEF_TAG 0x16 /* 16b: VLAN Port 3 Default Tag Register */ -#define ROBO_VLAN_PORT4_DEF_TAG 0x18 /* 16b: VLAN Port 4 Default Tag Register */ -#define ROBO_VLAN_PORTMII_DEF_TAG 0x1a /* 16b: VLAN Port MII Default Tag Register */ -/* 5380 only */ -#define ROBO_VLAN_PORT5_DEF_TAG 0x1a /* 16b: VLAN Port 5 Default Tag Register */ -#define ROBO_VLAN_PORT6_DEF_TAG 0x1c /* 16b: VLAN Port 6 Default Tag Register */ -#define ROBO_VLAN_PORT7_DEF_TAG 0x1e /* 16b: VLAN Port 7 Default Tag Register */ - -/* obsolete */ -#define ROBO_VLAN_PORT0_CTRL 0x00 /* 16b: Port 0 VLAN Register */ -#define ROBO_VLAN_PORT1_CTRL 0x02 /* 16b: Port 1 VLAN Register */ -#define ROBO_VLAN_PORT2_CTRL 0x04 /* 16b: Port 2 VLAN Register */ -#define ROBO_VLAN_PORT3_CTRL 0x06 /* 16b: Port 3 VLAN Register */ -#define ROBO_VLAN_PORT4_CTRL 0x08 /* 16b: Port 4 VLAN Register */ -#define ROBO_VLAN_IM_PORT_CTRL 0x10 /* 16b: Inverse MII Port VLAN Reg */ -#define ROBO_VLAN_SMP_PORT_CTRL 0x12 /* 16b: Serial Port VLAN Register */ -#define ROBO_VLAN_PORTSPI_DEF_TAG 0x1c /* 16b: VLAN Port SPI Default Tag Register */ -#define ROBO_VLAN_PRIORITY_REMAP 0x20 /* 24b: VLAN Priority Re-Map Register */ - -#ifndef _CFE_ -#pragma pack() -#endif - - -#endif /* !__BCM535M_H_ */ - - - - - diff --git a/target/linux/package/switch/src/gpio.h b/target/linux/package/switch/src/gpio.h deleted file mode 100644 index 825760033..000000000 --- a/target/linux/package/switch/src/gpio.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef __GPIO_H -#define __GPIO_H - -#if defined(BCMGPIO2) - -#ifdef LINUX_2_4 -#define sbh bcm947xx_sbh -extern void *bcm947xx_sbh; -#else -extern void *sbh; -#endif - -extern __u32 sb_gpioin(void *sbh); -extern __u32 sb_gpiointpolarity(void *sbh, __u32 mask, __u32 val, __u8 prio); -extern __u32 sb_gpiointmask(void *sbh, __u32 mask, __u32 val, __u8 prio); -extern __u32 sb_gpioouten(void *sbh, __u32 mask, __u32 val, __u8 prio); -extern __u32 sb_gpioout(void *sbh, __u32 mask, __u32 val, __u8 prio); - -#define gpioin() sb_gpioin(sbh) -#define gpiointpolarity(mask,val) sb_gpiointpolarity(sbh, mask, val, 0) -#define gpiointmask(mask,val) sb_gpiointmask(sbh, mask, val, 0) -#define gpioouten(mask,val) sb_gpioouten(sbh, mask, val, 0) -#define gpioout(mask,val) sb_gpioout(sbh, mask, val, 0) - -#elif defined(BCMGPIO) - -#define sbh bcm947xx_sbh -extern void *bcm947xx_sbh; -extern __u32 sb_gpioin(void *sbh); -extern __u32 sb_gpiointpolarity(void *sbh, __u32 mask, __u32 val); -extern __u32 sb_gpiointmask(void *sbh, __u32 mask, __u32 val); -extern __u32 sb_gpioouten(void *sbh, __u32 mask, __u32 val); -extern __u32 sb_gpioout(void *sbh, __u32 mask, __u32 val); - -#define gpioin() sb_gpioin(sbh) -#define gpiointpolarity(mask,val) sb_gpiointpolarity(sbh, mask, val) -#define gpiointmask(mask,val) sb_gpiointmask(sbh, mask, val) -#define gpioouten(mask,val) sb_gpioouten(sbh, mask, val) -#define gpioout(mask,val) sb_gpioout(sbh, mask, val) - -#else -#error Unsupported/unknown GPIO configuration -#endif - -#endif /* __GPIO_H */ diff --git a/target/linux/package/switch/src/switch-adm.c b/target/linux/package/switch/src/switch-adm.c deleted file mode 100644 index 8d2712001..000000000 --- a/target/linux/package/switch/src/switch-adm.c +++ /dev/null @@ -1,571 +0,0 @@ -/* - * ADMTEK Adm6996 switch configuration module - * - * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name> - * - * Partially based on Broadcom Home Networking Division 10/100 Mbit/s - * Ethernet Device Driver (from Montavista 2.4.20_mvl31 Kernel). - * Copyright (C) 2004 Broadcom Corporation - * - * adm_rreg function from adm6996 - * Copyright (C) 2004 Nikki Chumakov <nikki@gattaca.ru> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/if.h> -#include <linux/if_arp.h> -#include <linux/sockios.h> -#include <linux/delay.h> -#include <asm/uaccess.h> - -#include "switch-core.h" -#include "gpio.h" - -#define DRIVER_NAME "adm6996" -#define DRIVER_VERSION "0.01" - -static int eecs = 0; -static int eesk = 0; -static int eedi = 0; -static int eerc = 0; -static int force = 0; - -MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>"); -MODULE_LICENSE("GPL"); -MODULE_PARM(eecs, "i"); -MODULE_PARM(eesk, "i"); -MODULE_PARM(eedi, "i"); -MODULE_PARM(eerc, "i"); -MODULE_PARM(force, "i"); - -/* Minimum timing constants */ -#define EECK_EDGE_TIME 3 /* 3us - max(adm 2.5us, 93c 1us) */ -#define EEDI_SETUP_TIME 1 /* 1us - max(adm 10ns, 93c 400ns) */ -#define EECS_SETUP_TIME 1 /* 1us - max(adm no, 93c 200ns) */ - -/* Handy macros for writing fixed length values */ -#define adm_write8(cs, b) { __u8 val = (__u8) (b); adm_write(cs, &val, sizeof(val)*8); } -#define adm_write16(cs, w) { __u16 val = hton16(w); adm_write(cs, (__u8 *)&val, sizeof(val)*8); } -#define adm_write32(cs, i) { uint32 val = hton32(i); adm_write(cs, (__u8 *)&val, sizeof(val)*8); } - -#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0) - -#if defined(BCMGPIO2) || defined(BCMGPIO) -extern char *nvram_get(char *name); - -/* Return gpio pin number assigned to the named pin */ -/* -* Variable should be in format: -* -* gpio<N>=pin_name -* -* 'def_pin' is returned if there is no such variable found. -*/ -static unsigned int getgpiopin(char *pin_name, unsigned int def_pin) -{ - char name[] = "gpioXXXX"; - char *val; - unsigned int pin; - - /* Go thru all possibilities till a match in pin name */ - for (pin = 0; pin < 16; pin ++) { - sprintf(name, "gpio%d", pin); - val = nvram_get(name); - if (val && !strcmp(val, pin_name)) - return pin; - } - return def_pin; -} -#endif - - -static void adm_write(int cs, char *buf, unsigned int bits) -{ - int i, len = (bits + 7) / 8; - __u8 mask; - - gpioout(eecs, (cs ? eecs : 0)); - udelay(EECK_EDGE_TIME); - - /* Byte assemble from MSB to LSB */ - for (i = 0; i < len; i++) { - /* Bit bang from MSB to LSB */ - for (mask = 0x80; mask && bits > 0; mask >>= 1, bits --) { - /* Clock low */ - gpioout(eesk, 0); - udelay(EECK_EDGE_TIME); - - /* Output on rising edge */ - gpioout(eedi, ((mask & buf[i]) ? eedi : 0)); - udelay(EEDI_SETUP_TIME); - - /* Clock high */ - gpioout(eesk, eesk); - udelay(EECK_EDGE_TIME); - } - } - - /* Clock low */ - gpioout(eesk, 0); - udelay(EECK_EDGE_TIME); - - if (cs) - gpioout(eecs, 0); -} - - -static void adm_read(int cs, char *buf, unsigned int bits) -{ - int i, len = (bits + 7) / 8; - __u8 mask; - - gpioout(eecs, (cs ? eecs : 0)); - udelay(EECK_EDGE_TIME); - - /* Byte assemble from MSB to LSB */ - for (i = 0; i < len; i++) { - __u8 byte; - - /* Bit bang from MSB to LSB */ - for (mask = 0x80, byte = 0; mask && bits > 0; mask >>= 1, bits --) { - __u8 gp; - - /* Clock low */ - gpioout(eesk, 0); - udelay(EECK_EDGE_TIME); - - /* Input on rising edge */ - gp = gpioin(); - if (gp & eedi) - byte |= mask; - - /* Clock high */ - gpioout(eesk, eesk); - udelay(EECK_EDGE_TIME); - } - - *buf++ = byte; - } - - /* Clock low */ - gpioout(eesk, 0); - udelay(EECK_EDGE_TIME); - - if (cs) - gpioout(eecs, 0); -} - - -/* Enable outputs with specified value to the chip */ -static void adm_enout(__u8 pins, __u8 val) -{ - /* Prepare GPIO output value */ - gpioout(pins, val); - - /* Enable GPIO outputs */ - gpioouten(pins, pins); - udelay(EECK_EDGE_TIME); -} - - -/* Disable outputs to the chip */ -static void adm_disout(__u8 pins) -{ - /* Disable GPIO outputs */ - gpioouten(pins, 0); - udelay(EECK_EDGE_TIME); -} - - -/* Advance clock(s) */ -static void adm_adclk(int clocks) -{ - int i; - for (i = 0; i < clocks; i++) { - /* Clock high */ - gpioout(eesk, eesk); - udelay(EECK_EDGE_TIME); - - /* Clock low */ - gpioout(eesk, 0); - udelay(EECK_EDGE_TIME); - } -} - -static __u32 adm_rreg(__u8 table, __u8 addr) -{ - /* cmd: 01 10 T DD R RRRRRR */ - __u8 bits[6] = { - 0xFF, 0xFF, 0xFF, 0xFF, - (0x06 << 4) | ((table & 0x01) << 3 | (addr&64)>>6), - ((addr&62)<<2) - }; - - __u8 rbits[4]; - - /* Enable GPIO outputs with all pins to 0 */ - adm_enout((__u8)(eecs | eesk | eedi), 0); - - adm_write(0, bits, 46); - adm_disout((__u8)(eedi)); - adm_adclk(2); - adm_read (0, rbits, 32); - - /* Extra clock(s) required per datasheet */ - adm_adclk(2); - - /* Disable GPIO outputs */ - adm_disout((__u8)(eecs | eesk)); - - if (!table) /* EEPROM has 16-bit registers, but pumps out two registers in one request */ - return (addr & 0x01 ? (rbits[0]<<8) | rbits[1] : (rbits[2]<<8) | (rbits[3])); - else - return (rbits[0]<<24) | (rbits[1]<<16) | (rbits[2]<<8) | rbits[3]; -} - - - -/* Write chip configuration register */ -/* Follow 93c66 timing and chip's min EEPROM timing requirement */ -void -adm_wreg(__u8 addr, __u16 val) -{ - /* cmd(27bits): sb(1) + opc(01) + addr(bbbbbbbb) + data(bbbbbbbbbbbbbbbb) */ - __u8 bits[4] = { - (0x05 << 5) | (addr >> 3), - (addr << 5) | (__u8)(val >> 11), - (__u8)(val >> 3), - (__u8)(val << 5) - }; - - /* Enable GPIO outputs with all pins to 0 */ - adm_enout((__u8)(eecs | eesk | eedi), 0); - - /* Write cmd. Total 27 bits */ - adm_write(1, bits, 27); - - /* Extra clock(s) required per datasheet */ - adm_adclk(2); - - /* Disable GPIO outputs */ - adm_disout((__u8)(eecs | eesk | eedi)); -} - - -/* Port configuration registers */ -static int port_conf[] = { 0x01, 0x03, 0x05, 0x07, 0x08, 0x09 }; - -/* Bits in VLAN port mapping */ -static int vlan_ports[] = { 1 << 0, 1 << 2, 1 << 4, 1 << 6, 1 << 7, 1 << 8 }; - -static int handle_vlan_port_read(void *driver, char *buf, int nr) -{ - int ports, i, c, len = 0; - - if ((nr < 0) || (nr > 15)) - return 0; - - /* Get VLAN port map */ - ports = adm_rreg(0, 0x13 + nr); - - for (i = 0; i <= 5; i++) { - if (ports & vlan_ports[i]) { - c = adm_rreg(0, port_conf[i]); - - len += sprintf(buf + len, "%d", i); - if (c & (1 << 4)) { - buf[len++] = 't'; - if (((c & (0xf << 10)) >> 10) == nr) - buf[len++] = '*'; - } else if (i == 5) - buf[len++] = 'u'; - - buf[len++] = '\t'; - } - } - len += sprintf(buf + len, "\n"); - - return len; -} - -static int handle_vlan_port_write(void *driver, char *buf, int nr) -{ - int i, cfg, ports; - switch_driver *d = (switch_driver *) driver; - switch_vlan_config *c = switch_parse_vlan(d, buf); - - if (c == NULL) - return -1; - - ports = adm_rreg(0, 0x13 + nr); - for (i = 0; i < d->ports; i++) { - if (c->port & (1 << i)) { - ports |= vlan_ports[i]; - - cfg = adm_rreg(0, port_conf[i]); - - /* Tagging */ - if (c->untag & (1 << i)) - cfg &= ~(1 << 4); - else - cfg |= (1 << 4); - - if ((c->untag | c->pvid) & (1 << i)) { - cfg = (cfg & ~(0xf << 10)) | (nr << 10); - } - - adm_wreg(port_conf[i], (__u16) cfg); - } else { - ports &= ~(vlan_ports[i]); - } - } - adm_wreg(0x13 + nr, (__u16) ports); - - return 0; -} - -static int handle_port_enable_read(void *driver, char *buf, int nr) -{ - return sprintf(buf, "%d\n", ((adm_rreg(0, port_conf[nr]) & (1 << 5)) ? 0 : 1)); -} - -static int handle_port_enable_write(void *driver, char *buf, int nr) -{ - int reg = adm_rreg(0, port_conf[nr]); - - if (buf[0] == '0') - reg |= (1 << 5); - else if (buf[0] == '1') - reg &= ~(1 << 5); - else return -1; - - adm_wreg(port_conf[nr], (__u16) reg); - return 0; -} - -static int handle_port_media_read(void *driver, char *buf, int nr) -{ - int len; - int media = 0; - int reg = adm_rreg(0, port_conf[nr]); - - if (reg & (1 << 1)) - media |= SWITCH_MEDIA_AUTO; - if (reg & (1 << 2)) - media |= SWITCH_MEDIA_100; - if (reg & (1 << 3)) - media |= SWITCH_MEDIA_FD; - - len = switch_print_media(buf, media); - return len + sprintf(buf + len, "\n"); -} - -static int handle_port_media_write(void *driver, char *buf, int nr) -{ - int media = switch_parse_media(buf); - int reg = adm_rreg(0, port_conf[nr]); - - if (media < 0) - return -1; - - reg &= ~((1 << 1) | (1 << 2) | (1 << 3)); - if (media & SWITCH_MEDIA_AUTO) - reg |= 1 << 1; - if (media & SWITCH_MEDIA_100) - reg |= 1 << 2; - if (media & SWITCH_MEDIA_FD) - reg |= 1 << 3; - - adm_wreg(port_conf[nr], reg); - - return 0; -} - -static int handle_vlan_enable_read(void *driver, char *buf, int nr) -{ - return sprintf(buf, "%d\n", ((adm_rreg(0, 0x11) & (1 << 5)) ? 1 : 0)); -} - -static int handle_vlan_enable_write(void *driver, char *buf, int nr) -{ - int reg = adm_rreg(0, 0x11); - - if (buf[0] == '1') - reg |= (1 << 5); - else if (buf[0] == '0') - reg &= ~(1 << 5); - else return -1; - - adm_wreg(0x11, (__u16) reg); - return 0; -} - -static int handle_reset(void *driver, char *buf, int nr) -{ - int i; - u32 cfg; - - /* - * Reset sequence: RC high->low(100ms)->high(30ms) - * - * WAR: Certain boards don't have the correct power on - * reset logic therefore we must explicitly perform the - * sequence in software. - */ - if (eerc) { - /* Keep RC high for at least 20ms */ - adm_enout(eerc, eerc); - for (i = 0; i < 20; i ++) - udelay(1000); - /* Keep RC low for at least 100ms */ - adm_enout(eerc, 0); - for (i = 0; i < 100; i++) - udelay(1000); - /* Set default configuration */ - adm_enout((__u8)(eesk | eedi), eesk); - /* Keep RC high for at least 30ms */ - adm_enout(eerc, eerc); - for (i = 0; i < 30; i++) - udelay(1000); - /* Leave RC high and disable GPIO outputs */ - adm_disout((__u8)(eecs | eesk | eedi)); - - } - - /* set up initial configuration for cpu port */ - cfg = (0x8000 | /* Auto MDIX */ - (0xf << 10) | /* PVID */ - (1 << 4) | /* Tagging */ - 0xf); /* full duplex, 100Mbps, auto neg, flow ctrl */ - adm_wreg(port_conf[5], cfg); - - /* vlan mode select register (0x11): vlan on, mac clone */ - adm_wreg(0x11, 0xff30); - - return 0; -} - -static int handle_registers(void *driver, char *buf, int nr) -{ - int i, len = 0; - - for (i = 0; i <= 0x33; i++) { - len += sprintf(buf + len, "0x%02x: 0x%04x\n", i, adm_rreg(0, i)); - } - - return len; -} - -static int handle_counters(void *driver, char *buf, int nr) -{ - int i, len = 0; - - for (i = 0; i <= 0x3c; i++) { - len += sprintf(buf + len, "0x%02x: 0x%08x\n", i, adm_rreg(1, i)); - } - - return len; -} - -static int detect_adm() -{ - int ret = 0; - -#if defined(BCMGPIO2) || defined(BCMGPIO) - int boardflags = atoi(nvram_get("boardflags")); - - if ((boardflags & 0x80) || force) { - ret = 1; - - eecs = getgpiopin("adm_eecs", 2); - eesk = getgpiopin("adm_eesk", 3); - eedi = getgpiopin("adm_eedi", 4); - eerc = getgpiopin("adm_rc", 0); - - } else if ((strcmp(nvram_get("boardtype") ?: "", "bcm94710dev") == 0) && - (strncmp(nvram_get("boardnum") ?: "", "42", 2) == 0)) { - /* WRT54G v1.1 hack */ - eecs = 2; - eesk = 3; - eedi = 5; - - ret = 1; - } else - printk("BFL_ENETADM not set in boardflags. Use force=1 to ignore.\n"); - - if (eecs) - eecs = (1 << eecs); - if (eesk) - eesk = (1 << eesk); - if (eedi) - eedi = (1 << eedi); - if (eerc) - eerc = (1 << eerc); -#else - ret = 1; -#endif - - return ret; -} - -static int __init adm_init() -{ - switch_config cfg[] = { - {"registers", handle_registers, NULL}, - {"counters", handle_counters, NULL}, - {"reset", NULL, handle_reset}, - {"enable_vlan", handle_vlan_enable_read, handle_vlan_enable_write}, - {NULL, NULL, NULL} - }; - switch_config port[] = { - {"enable", handle_port_enable_read, handle_port_enable_write}, - {"media", handle_port_media_read, handle_port_media_write}, - {NULL, NULL, NULL} - }; - switch_config vlan[] = { - {"ports", handle_vlan_port_read, handle_vlan_port_write}, - {NULL, NULL, NULL} - }; - switch_driver driver = { - name: DRIVER_NAME, - version: DRIVER_VERSION, - interface: "eth0", - ports: 6, - cpuport: 5, - vlans: 16, - driver_handlers: cfg, - port_handlers: port, - vlan_handlers: vlan, - }; - - if (!detect_adm()) - return -ENODEV; - - return switch_register_driver(&driver); -} - -static void __exit adm_exit() -{ - switch_unregister_driver(DRIVER_NAME); -} - - -module_init(adm_init); -module_exit(adm_exit); diff --git a/target/linux/package/switch/src/switch-core.c b/target/linux/package/switch/src/switch-core.c deleted file mode 100644 index 6b59b9ba2..000000000 --- a/target/linux/package/switch/src/switch-core.c +++ /dev/null @@ -1,466 +0,0 @@ -/* - * switch-core.c - * - * Copyright (C) 2005 Felix Fietkau <openwrt@nbd.name> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * $Id: $ - * - * Basic doc of driver's /proc interface: - * /proc/switch/<interface>/ - * registers: read-only - * counters: read-only - * reset: write causes hardware reset - * enable_vlan: "0", "1" - * port/<port-number>/ - * enabled: "0", "1" - * media: "AUTO", "100FD", "100HD", "10FD", "10HD" - * vlan/<port-number>/ - * ports: same syntax as for nvram's vlan*ports (eg. "1 2 3 4 5*") - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/init.h> -#include <asm/uaccess.h> -#include <linux/proc_fs.h> -#include <linux/list.h> - -#include "switch-core.h" - -static int drv_num = 0; -static struct proc_dir_entry *switch_root; -switch_driver drivers; - -typedef struct { - struct list_head list; - struct proc_dir_entry *parent; - int nr; - void *driver; - switch_config handler; -} switch_proc_handler; - -typedef struct { - struct proc_dir_entry *driver_dir, *port_dir, *vlan_dir; - struct proc_dir_entry **ports, **vlans; - switch_proc_handler data; - int nr; -} switch_priv; - -static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos); -static ssize_t switch_proc_write(struct file *file, const char *buf, size_t count, void *data); - -static struct file_operations switch_proc_fops = { - read: switch_proc_read, - write: switch_proc_write -}; - -static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos) -{ -#ifdef LINUX_2_4 - struct inode *inode = file->f_dentry->d_inode; - struct proc_dir_entry *dent = inode->u.generic_ip; -#else - struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode); -#endif - char *page; - int len = 0; - - if ((page = kmalloc(SWITCH_MAX_BUFSZ, GFP_KERNEL)) == NULL) - return -ENOBUFS; - - if (dent->data != NULL) { - switch_proc_handler *handler = (switch_proc_handler *) dent->data; - if (handler->handler.read != NULL) - len += handler->handler.read(handler->driver, page + len, handler->nr); - } - len += 1; - - if (*ppos < len) { - len = min_t(int, len - *ppos, count); - if (copy_to_user(buf, (page + *ppos), len)) { - kfree(page); - return -EFAULT; - } - *ppos += len; - } else { - len = 0; - } - - return len; -} - - -static ssize_t switch_proc_write(struct file *file, const char *buf, size_t count, void *data) -{ -#ifdef LINUX_2_4 - struct inode *inode = file->f_dentry->d_inode; - struct proc_dir_entry *dent = inode->u.generic_ip; -#else - struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode); -#endif - char *page; - int ret = -EINVAL; - - if ((page = kmalloc(count + 1, GFP_KERNEL)) == NULL) - return -ENOBUFS; - - if (copy_from_user(page, buf, count)) { - kfree(page); - return -EINVAL; - } - page[count] = 0; - - if (dent->data != NULL) { - switch_proc_handler *handler = (switch_proc_handler *) dent->data; - if (handler->handler.write != NULL) { - if ((ret = handler->handler.write(handler->driver, page, handler->nr)) >= 0) - ret = count; - } - } - - kfree(page); - return ret; -} - -static int handle_driver_name(void *driver, char *buf, int nr) -{ - char *name = ((switch_driver *) driver)->name; - return sprintf(buf, "%s\n", name); -} - -static int handle_driver_version(void *driver, char *buf, int nr) -{ - char *version = ((switch_driver *) driver)->version; - strcpy(buf, version); - return sprintf(buf, "%s\n", version); -} - -static void add_handler(switch_driver *driver, switch_config *handler, struct proc_dir_entry *parent, int nr) -{ - switch_priv *priv = (switch_priv *) driver->data; - struct proc_dir_entry *p; - int mode; - - switch_proc_handler *tmp; - tmp = (switch_proc_handler *) kmalloc(sizeof(switch_proc_handler), GFP_KERNEL); - INIT_LIST_HEAD(&tmp->list); - tmp->parent = parent; - tmp->nr = nr; - tmp->driver = driver; - memcpy(&tmp->handler, handler, sizeof(switch_config)); - list_add(&tmp->list, &priv->data.list); - - mode = 0; - if (handler->read != NULL) mode |= S_IRUSR; - if (handler->write != NULL) mode |= S_IWUSR; - - if ((p = create_proc_entry(handler->name, mode, parent)) != NULL) { - p->data = (void *) tmp; - p->proc_fops = &switch_proc_fops; - } -} - -static inline void add_handlers(switch_driver *driver, switch_config *handlers, struct proc_dir_entry *parent, int nr) -{ - int i; - - for (i = 0; handlers[i].name != NULL; i++) { - add_handler(driver, &(handlers[i]), parent, nr); - } -} - -static void remove_handlers(switch_priv *priv) -{ - struct list_head *pos, *q; - switch_proc_handler *tmp; - - list_for_each_safe(pos, q, &priv->data.list) { - tmp = list_entry(pos, switch_proc_handler, list); - list_del(pos); - remove_proc_entry(tmp->handler.name, tmp->parent); - kfree(tmp); - } -} - - -static void do_unregister(switch_driver *driver) -{ - char buf[4]; - int i; - switch_priv *priv = (switch_priv *) driver->data; - - remove_handlers(priv); - - for(i = 0; priv->ports[i] != NULL; i++) { - sprintf(buf, "%d", i); - remove_proc_entry(buf, priv->port_dir); - } - kfree(priv->ports); - remove_proc_entry("port", priv->driver_dir); - - for(i = 0; priv->vlans[i] != NULL; i++) { - sprintf(buf, "%d", i); - remove_proc_entry(buf, priv->vlan_dir); - } - kfree(priv->vlans); - remove_proc_entry("vlan", priv->driver_dir); - - remove_proc_entry(driver->interface, switch_root); - - if (priv->nr == (drv_num - 1)) - drv_num--; - - kfree(priv); -} - -switch_config global_driver_handlers[] = { - {"driver", handle_driver_name, NULL}, - {"version", handle_driver_version, NULL}, - {NULL, NULL, NULL} -}; - -static int do_register(switch_driver *driver) -{ - switch_priv *priv; - int i; - char buf[4]; - - if ((priv = kmalloc(sizeof(switch_priv), GFP_KERNEL)) == NULL) - return -ENOBUFS; - driver->data = (void *) priv; - - INIT_LIST_HEAD(&priv->data.list); - - priv->nr = drv_num++; - priv->driver_dir = proc_mkdir(driver->interface, switch_root); - if (driver->driver_handlers != NULL) { - add_handlers(driver, driver->driver_handlers, priv->driver_dir, 0); - add_handlers(driver, global_driver_handlers, priv->driver_dir, 0); - } - - priv->port_dir = proc_mkdir("port", priv->driver_dir); - priv->ports = kmalloc((driver->ports + 1) * sizeof(struct proc_dir_entry *), GFP_KERNEL); - for (i = 0; i < driver->ports; i++) { - sprintf(buf, "%d", i); - priv->ports[i] = proc_mkdir(buf, priv->port_dir); - if (driver->port_handlers != NULL) - add_handlers(driver, driver->port_handlers, priv->ports[i], i); - } - priv->ports[i] = NULL; - - priv->vlan_dir = proc_mkdir("vlan", priv->driver_dir); - priv->vlans = kmalloc((driver->vlans + 1) * sizeof(struct proc_dir_entry *), GFP_KERNEL); - for (i = 0; i < driver->vlans; i++) { - sprintf(buf, "%d", i); - priv->vlans[i] = proc_mkdir(buf, priv->vlan_dir); - if (driver->vlan_handlers != NULL) - add_handlers(driver, driver->vlan_handlers, priv->vlans[i], i); - } - priv->vlans[i] = NULL; - - - return 0; -} - -static inline int isspace(char c) { - switch(c) { - case ' ': - case 0x09: - case 0x0a: - case 0x0d: - return 1; - default: - return 0; - } -} - -#define toupper(c) (islower(c) ? ((c) ^ 0x20) : (c)) -#define islower(c) (((unsigned char)((c) - 'a')) < 26) - -int switch_parse_media(char *buf) -{ - char *str = buf; - while (*buf != 0) { - *buf = toupper(*buf); - buf++; - } - - if (strncmp(str, "AUTO", 4) == 0) - return SWITCH_MEDIA_AUTO; - else if (strncmp(str, "100FD", 5) == 0) - return SWITCH_MEDIA_100 | SWITCH_MEDIA_FD; - else if (strncmp(str, "100HD", 5) == 0) - return SWITCH_MEDIA_100; - else if (strncmp(str, "10FD", 4) == 0) - return SWITCH_MEDIA_FD; - else if (strncmp(str, "10HD", 4) == 0) - return 0; - else return -1; -} - -int switch_print_media(char *buf, int media) -{ - int len = 0; - - if (media & SWITCH_MEDIA_AUTO) - len = sprintf(buf, "Auto"); - else if (media == (SWITCH_MEDIA_100 | SWITCH_MEDIA_FD)) - len = sprintf(buf, "100FD"); - else if (media == SWITCH_MEDIA_100) - len = sprintf(buf, "100HD"); - else if (media == SWITCH_MEDIA_FD) - len = sprintf(buf, "10FD"); - else if (media == 0) - len = sprintf(buf, "10HD"); - else - len = sprintf(buf, "Invalid"); - - return len; -} - -switch_vlan_config *switch_parse_vlan(switch_driver *driver, char *buf) -{ - switch_vlan_config *c; - int j, u, p, s; - - c = kmalloc(sizeof(switch_vlan_config), GFP_KERNEL); - memset(c, 0, sizeof(switch_vlan_config)); - - while (isspace(*buf)) buf++; - j = 0; - while (*buf >= '0' && *buf <= '9') { - j *= 10; - j += *buf++ - '0'; - - u = ((j == driver->cpuport) ? 0 : 1); - p = 0; - s = !(*buf >= '0' && *buf <= '9'); - - if (s) { - while (s && !isspace(*buf) && (*buf != 0)) { - switch(*buf) { - case 'u': - u = 1; - break; - case 't': - u = 0; - break; - case '*': - p = 1; - break; - } - buf++; - } - c->port |= (1 << j); - if (u) - c->untag |= (1 << j); - if (p) - c->pvid |= (1 << j); - - j = 0; - } - - while (isspace(*buf)) buf++; - } - if (*buf != 0) return NULL; - - c->port &= (1 << driver->ports) - 1; - c->untag &= (1 << driver->ports) - 1; - c->pvid &= (1 << driver->ports) - 1; - - return c; -} - - -int switch_register_driver(switch_driver *driver) -{ - struct list_head *pos; - switch_driver *new; - int ret; - - list_for_each(pos, &drivers.list) { - if (strcmp(list_entry(pos, switch_driver, list)->name, driver->name) == 0) { - printk("Switch driver '%s' already exists in the kernel\n", driver->name); - return -EINVAL; - } - if (strcmp(list_entry(pos, switch_driver, list)->interface, driver->interface) == 0) { - printk("There is already a switch registered on the device '%s'\n", driver->interface); - return -EINVAL; - } - } - - new = kmalloc(sizeof(switch_driver), GFP_KERNEL); - memcpy(new, driver, sizeof(switch_driver)); - new->name = strdup(driver->name); - new->interface = strdup(driver->interface); - - if ((ret = do_register(new)) < 0) { - kfree(new->name); - kfree(new); - return ret; - } - INIT_LIST_HEAD(&new->list); - list_add(&new->list, &drivers.list); - - return 0; -} - -void switch_unregister_driver(char *name) { - struct list_head *pos, *q; - switch_driver *tmp; - - list_for_each_safe(pos, q, &drivers.list) { - tmp = list_entry(pos, switch_driver, list); - if (strcmp(tmp->name, name) == 0) { - do_unregister(tmp); - list_del(pos); - kfree(tmp->name); - kfree(tmp); - - return; - } - } -} - -static int __init switch_init() -{ - if ((switch_root = proc_mkdir("switch", NULL)) == NULL) { - printk("%s: proc_mkdir failed.\n", __FILE__); - return -ENODEV; - } - - INIT_LIST_HEAD(&drivers.list); - - return 0; -} - -static void __exit switch_exit() -{ - remove_proc_entry("switch", NULL); -} - -MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>"); -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(switch_register_driver); -EXPORT_SYMBOL(switch_unregister_driver); -EXPORT_SYMBOL(switch_parse_vlan); -EXPORT_SYMBOL(switch_parse_media); -EXPORT_SYMBOL(switch_print_media); - -module_init(switch_init); -module_exit(switch_exit); diff --git a/target/linux/package/switch/src/switch-core.h b/target/linux/package/switch/src/switch-core.h deleted file mode 100644 index 5292469c0..000000000 --- a/target/linux/package/switch/src/switch-core.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef __SWITCH_CORE_H -#define __SWITCH_CORE_H - -#include <linux/version.h> -#include <linux/list.h> -#define SWITCH_MAX_BUFSZ 4096 - -#define SWITCH_MEDIA_AUTO 1 -#define SWITCH_MEDIA_100 2 -#define SWITCH_MEDIA_FD 4 - -#ifndef KERNEL_VERSION -#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) -#endif - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#define LINUX_2_4 -#endif - -typedef int (*switch_handler)(void *driver, char *buf, int nr); - -typedef struct { - char *name; - switch_handler read, write; -} switch_config; - -typedef struct { - struct list_head list; - char *name; - char *version; - char *interface; - int cpuport; - int ports; - int vlans; - switch_config *driver_handlers, *port_handlers, *vlan_handlers; - void *data; - void *priv; -} switch_driver; - -typedef struct { - u32 port, untag, pvid; -} switch_vlan_config; - - -extern int switch_register_driver(switch_driver *driver); -extern void switch_unregister_driver(char *name); -extern switch_vlan_config *switch_parse_vlan(switch_driver *driver, char *buf); -extern int switch_parse_media(char *buf); -extern int switch_print_media(char *buf, int media); - -static inline char *strdup(char *str) -{ - char *new = kmalloc(strlen(str) + 1, GFP_KERNEL); - strcpy(new, str); - return new; -} - - -#endif diff --git a/target/linux/package/switch/src/switch-robo.c b/target/linux/package/switch/src/switch-robo.c deleted file mode 100644 index b23fca644..000000000 --- a/target/linux/package/switch/src/switch-robo.c +++ /dev/null @@ -1,478 +0,0 @@ -/* - * Broadcom BCM5325E/536x switch configuration module - * - * Copyright (C) 2005 Felix Fietkau <nbd@nbd.name> - * Based on 'robocfg' by Oleg I. Vdovikin - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/if.h> -#include <linux/if_arp.h> -#include <linux/sockios.h> -#include <linux/ethtool.h> -#include <linux/mii.h> -#include <asm/uaccess.h> - -#include "switch-core.h" -#include "etc53xx.h" - -#define DRIVER_NAME "bcm53xx" -#define DRIVER_VERSION "0.01" - -#define ROBO_PHY_ADDR 0x1E /* robo switch phy address */ - -/* MII registers */ -#define REG_MII_PAGE 0x10 /* MII Page register */ -#define REG_MII_ADDR 0x11 /* MII Address register */ -#define REG_MII_DATA0 0x18 /* MII Data register 0 */ - -#define REG_MII_PAGE_ENABLE 1 -#define REG_MII_ADDR_WRITE 1 -#define REG_MII_ADDR_READ 2 - -/* Private et.o ioctls */ -#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9) -#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10) - -static char *device; -static int use_et = 0; -static int is_5350 = 0; -static struct ifreq ifr; -static struct net_device *dev; -static unsigned char port[6] = { 0, 1, 2, 3, 4, 8 }; - -static int do_ioctl(int cmd, void *buf) -{ - mm_segment_t old_fs = get_fs(); - int ret; - - if (buf != NULL) - ifr.ifr_data = (caddr_t) buf; - - set_fs(KERNEL_DS); - ret = dev->do_ioctl(dev, &ifr, cmd); - set_fs(old_fs); - - return ret; -} - -static u16 mdio_read(__u16 phy_id, __u8 reg) -{ - if (use_et) { - int args[2] = { reg }; - - if (phy_id != ROBO_PHY_ADDR) { - printk( - "Access to real 'phy' registers unavaliable.\n" - "Upgrade kernel driver.\n"); - - return 0xffff; - } - - - if (do_ioctl(SIOCGETCPHYRD, &args) < 0) { - printk("[%s:%d] SIOCGETCPHYRD failed!\n", __FILE__, __LINE__); - return 0xffff; - } - - return args[1]; - } else { - struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr.ifr_data; - mii->phy_id = phy_id; - mii->reg_num = reg; - - if (do_ioctl(SIOCGMIIREG, NULL) < 0) { - printk("[%s:%d] SIOCGMIIREG failed!\n", __FILE__, __LINE__); - - return 0xffff; - } - - return mii->val_out; - } -} - -static void mdio_write(__u16 phy_id, __u8 reg, __u16 val) -{ - if (use_et) { - int args[2] = { reg, val }; - - if (phy_id != ROBO_PHY_ADDR) { - printk( - "Access to real 'phy' registers unavaliable.\n" - "Upgrade kernel driver.\n"); - - return; - } - - if (do_ioctl(SIOCSETCPHYWR, args) < 0) { - printk("[%s:%d] SIOCGETCPHYWR failed!\n", __FILE__, __LINE__); - return; - } - } else { - struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&ifr.ifr_data; - - mii->phy_id = phy_id; - mii->reg_num = reg; - mii->val_in = val; - - if (do_ioctl(SIOCSMIIREG, NULL) < 0) { - printk("[%s:%d] SIOCSMIIREG failed!\n", __FILE__, __LINE__); - return; - } - } -} - -static int robo_reg(__u8 page, __u8 reg, __u8 op) -{ - int i = 3; - - /* set page number */ - mdio_write(ROBO_PHY_ADDR, REG_MII_PAGE, - (page << 8) | REG_MII_PAGE_ENABLE); - - /* set register address */ - mdio_write(ROBO_PHY_ADDR, REG_MII_ADDR, - (reg << 8) | op); - - /* check if operation completed */ - while (i--) { - if ((mdio_read(ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0) - return 0; - } - - printk("[%s:%d] timeout in robo_reg!\n", __FILE__, __LINE__); - - return 0; -} - -static void robo_read(__u8 page, __u8 reg, __u16 *val, int count) -{ - int i; - - robo_reg(page, reg, REG_MII_ADDR_READ); - - for (i = 0; i < count; i++) - val[i] = mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + i); -} - -static __u16 robo_read16(__u8 page, __u8 reg) -{ - robo_reg(page, reg, REG_MII_ADDR_READ); - - return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0); -} - -static __u32 robo_read32(__u8 page, __u8 reg) -{ - robo_reg(page, reg, REG_MII_ADDR_READ); - - return mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0) + - (mdio_read(ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16); -} - -static void robo_write16(__u8 page, __u8 reg, __u16 val16) -{ - /* write data */ - mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val16); - - robo_reg(page, reg, REG_MII_ADDR_WRITE); -} - -static void robo_write32(__u8 page, __u8 reg, __u32 val32) -{ - /* write data */ - mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 65535); - mdio_write(ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16); - - robo_reg(page, reg, REG_MII_ADDR_WRITE); -} - -/* checks that attached switch is 5325E/5350 */ -static int robo_vlan5350() -{ - /* set vlan access id to 15 and read it back */ - __u16 val16 = 15; - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16); - - /* 5365 will refuse this as it does not have this reg */ - return (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350) == val16); -} - - - -static int robo_probe(char *devname) -{ - struct ethtool_drvinfo info; - int i; - __u32 phyid; - - printk("Probing device %s: ", devname); - strcpy(ifr.ifr_name, devname); - - if ((dev = dev_get_by_name(devname)) == NULL) { - printk("No such device\n"); - return 1; - } - - info.cmd = ETHTOOL_GDRVINFO; - if (do_ioctl(SIOCETHTOOL, (void *) &info) < 0) { - printk("SIOCETHTOOL: not supported\n"); - return 1; - } - - /* try access using MII ioctls - get phy address */ - if (do_ioctl(SIOCGMIIPHY, NULL) < 0) { - use_et = 1; - } else { - /* got phy address check for robo address */ - struct mii_ioctl_data *mii = (struct mii_ioctl_data *) &ifr.ifr_data; - if (mii->phy_id != ROBO_PHY_ADDR) { - printk("Invalid phy address (%d)\n", mii->phy_id); - return 1; - } - } - - phyid = mdio_read(ROBO_PHY_ADDR, 0x2) | - (mdio_read(ROBO_PHY_ADDR, 0x3) << 16); - - if (phyid == 0xffffffff || phyid == 0x55210022) { - printk("No Robo switch in managed mode found\n"); - return 1; - } - - is_5350 = robo_vlan5350(); - - printk("found!\n"); - return 0; -} - - -static int handle_vlan_port_read(void *driver, char *buf, int nr) -{ - __u16 val16; - int len = 0; - int j; - - val16 = (nr) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */; - - if (is_5350) { - u32 val32; - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16); - /* actual read */ - val32 = robo_read32(ROBO_VLAN_PAGE, ROBO_VLAN_READ); - if ((val32 & (1 << 20)) /* valid */) { - for (j = 0; j < 6; j++) { - if (val32 & (1 << j)) { - len += sprintf(buf + len, "%d", j); - if (val32 & (1 << (j + 6))) { - if (j == 5) buf[len++] = 'u'; - } else { - buf[len++] = 't'; - if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr) - buf[len++] = '*'; - } - buf[len++] = '\t'; - } - } - len += sprintf(buf + len, "\n"); - } - } else { - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16); - /* actual read */ - val16 = robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_READ); - if ((val16 & (1 << 14)) /* valid */) { - for (j = 0; j < 6; j++) { - if (val16 & (1 << j)) { - len += sprintf(buf + len, "%d", j); - if (val16 & (1 << (j + 7))) { - if (j == 5) buf[len++] = 'u'; - } else { - buf[len++] = 't'; - if (robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1)) == nr) - buf[len++] = '*'; - } - buf[len++] = '\t'; - } - } - len += sprintf(buf + len, "\n"); - } - } - - return len; -} - -static int handle_vlan_port_write(void *driver, char *buf, int nr) -{ - switch_driver *d = (switch_driver *) driver; - switch_vlan_config *c = switch_parse_vlan(d, buf); - int j; - __u16 val16; - - if (c == NULL) - return -EINVAL; - - for (j = 0; j < d->ports; j++) { - if ((c->untag | c->pvid) & (1 << j)) - /* change default vlan tag */ - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), nr); - } - - /* write config now */ - val16 = (nr) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */; - if (is_5350) { - robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, - (1 << 20) /* valid */ | (c->untag << 6) | c->port); - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16); - } else { - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, - (1 << 14) /* valid */ | (c->untag << 7) | c->port); - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16); - } - - return 0; -} - -#define set_switch(state) \ - robo_write16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, (robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) | (state ? 2 : 0)); - -static int handle_enable_read(void *driver, char *buf, int nr) -{ - return sprintf(buf, "%d\n", (((robo_read16(ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2) == 2) ? 1 : 0)); -} - -static int handle_enable_write(void *driver, char *buf, int nr) -{ - set_switch(buf[0] == '1'); - - return 0; -} - -static int handle_enable_vlan_read(void *driver, char *buf, int nr) -{ - return sprintf(buf, "%d\n", (((robo_read16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0) & (1 << 7)) == (1 << 7)) ? 1 : 0)); -} - -static int handle_enable_vlan_write(void *driver, char *buf, int nr) -{ - int disable = ((buf[0] != '1') ? 1 : 0); - - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 : - (1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */); - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 : - (1 << 1) | (1 << 2) | (1 << 3) /* RSV multicast */); - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 : - (1 << 6) /* drop invalid VID frames */); - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 : - (1 << 3) /* drop miss V table frames */); - - return 0; -} - -static int handle_reset(void *driver, char *buf, int nr) -{ - switch_driver *d = (switch_driver *) driver; - switch_vlan_config *c = switch_parse_vlan(d, buf); - int j; - __u16 val16; - - if (c == NULL) - return -EINVAL; - - /* disable switching */ - set_switch(0); - - /* reset vlans */ - for (j = 0; j <= (is_5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); j++) { - /* write config now */ - val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */; - if (is_5350) - robo_write32(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, 0); - else - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0); - robo_write16(ROBO_VLAN_PAGE, (is_5350 ? ROBO_VLAN_TABLE_ACCESS_5350 : ROBO_VLAN_TABLE_ACCESS), val16); - } - - /* reset ports to a known good state */ - for (j = 0; j < d->ports; j++) { - robo_write16(ROBO_CTRL_PAGE, port[j], 0x0000); - robo_write16(ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (j << 1), 0); - } - - /* enable switching */ - set_switch(1); - - /* enable vlans */ - handle_enable_vlan_write(driver, "1", 0); - - return 0; -} - -static int __init robo_init() -{ - int notfound = 1; - - device = strdup("ethX"); - for (device[3] = '0'; (device[3] <= '3') && notfound; device[3]++) { - notfound = robo_probe(device); - } - device[3]--; - - if (notfound) { - kfree(device); - return -ENODEV; - } else { - switch_config cfg[] = { - {"enable", handle_enable_read, handle_enable_write}, - {"enable_vlan", handle_enable_vlan_read, handle_enable_vlan_write}, - {"reset", NULL, handle_reset}, - {NULL, NULL, NULL} - }; - switch_config vlan[] = { - {"ports", handle_vlan_port_read, handle_vlan_port_write}, - {NULL, NULL, NULL} - }; - switch_driver driver = { - name: DRIVER_NAME, - version: DRIVER_VERSION, - interface: device, - cpuport: 5, - ports: 6, - vlans: 16, - driver_handlers: cfg, - port_handlers: NULL, - vlan_handlers: vlan, - }; - - return switch_register_driver(&driver); - } -} - -static void __exit robo_exit() -{ - switch_unregister_driver(DRIVER_NAME); - kfree(device); -} - - -MODULE_AUTHOR("Felix Fietkau <openwrt@nbd.name>"); -MODULE_LICENSE("GPL"); - -module_init(robo_init); -module_exit(robo_exit); |