diff options
Diffstat (limited to 'target/linux/adm5120')
| -rw-r--r-- | target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c | 27 | ||||
| -rw-r--r-- | target/linux/adm5120/files/drivers/leds/leds-adm5120.c | 31 |
2 files changed, 38 insertions, 20 deletions
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c index a58bec3d4..d1c6bc42a 100644 --- a/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c +++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c @@ -102,7 +102,12 @@ static void wp54_reset(void) gpio_set_value(ADM5120_GPIO_PIN3, 0); } -static void __init np2xg_setup(void) +static void np28g_reset(void) +{ + gpio_set_value(ADM5120_GPIO_PIN4, 0); +} + +static void __init np27g_setup(void) { gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ gpio_direction_output(ADM5120_GPIO_PIN5, 0); @@ -113,6 +118,20 @@ static void __init np2xg_setup(void) /* TODO: setup mac address */ } +static void __init np28g_setup(void) +{ + gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + + gpio_request(ADM5120_GPIO_PIN4, NULL); /* for system reset */ + gpio_direction_output(ADM5120_GPIO_PIN4, 1); + + /* setup data for flash0 device */ + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + + /* TODO: setup mac address */ +} + static void __init wp54_setup(void) { gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ @@ -121,7 +140,6 @@ static void __init wp54_setup(void) gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */ gpio_direction_output(ADM5120_GPIO_PIN3, 1); - /* setup data for flash0 device */ adm5120_flash0_data.switch_bank = switch_bank_gpio5; @@ -147,15 +165,16 @@ static void __init wp54_wrt_setup(void) /*--------------------------------------------------------------------------*/ ADM5120_BOARD_START(NP27G, "Compex NetPassage 27G") - .board_setup = np2xg_setup, + .board_setup = np27g_setup, .eth_num_ports = 5, .eth_vlans = np27g_vlans, .num_devices = ARRAY_SIZE(np2xg_devices), .devices = np2xg_devices, + /* TODO: add PCI IRQ map */ ADM5120_BOARD_END ADM5120_BOARD_START(NP28G, "Compex NetPassage 28G") - .board_setup = np2xg_setup, + .board_setup = np28g_setup, .eth_num_ports = 4, .eth_vlans = np28g_vlans, .num_devices = ARRAY_SIZE(np2xg_devices), diff --git a/target/linux/adm5120/files/drivers/leds/leds-adm5120.c b/target/linux/adm5120/files/drivers/leds/leds-adm5120.c index b57f97a03..9e4649221 100644 --- a/target/linux/adm5120/files/drivers/leds/leds-adm5120.c +++ b/target/linux/adm5120/files/drivers/leds/leds-adm5120.c @@ -89,21 +89,20 @@ LED_ARRAY(np27g) { /* FIXME: untested */ }; #endif -#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) -LED_ARRAY(np28g) { /* FIXME: untested */ - LED_STD(ADM5120_GPIO_xxxx, "lan1", NULL), - LED_STD(ADM5120_GPIO_xxxx, "lan2", NULL), - LED_STD(ADM5120_GPIO_xxxx, "lan3", NULL), - LED_STD(ADM5120_GPIO_xxxx, "wan", NULL), - LED_STD(ADM5120_GPIO_xxxx, "wlan", NULL), - LED_STD(ADM5120_GPIO_xxxx, "usb1", NULL), - LED_STD(ADM5120_GPIO_xxxx, "usb2", NULL), - LED_STD(ADM5120_GPIO_xxxx, "usb3", NULL), - LED_STD(ADM5120_GPIO_xxxx, "usb4", NULL), - LED_INV(ADM5120_GPIO_PIN2, "power", NULL), - LED_STD(ADM5120_GPIO_xxxx, "diag", NULL), +LED_ARRAY(np28g) { + LED_INV(ADM5120_GPIO_PIN2, "diag", NULL), + LED_INV(ADM5120_GPIO_PIN3, "power", NULL), + LED_INV(ADM5120_GPIO_PIN6, "wan_cond", NULL), + LED_INV(ADM5120_GPIO_PIN7, "wifi", NULL), + LED_INV(ADM5120_GPIO_P0L2, "usb1", NULL), + LED_INV(ADM5120_GPIO_P1L0, "lan1", NULL), + LED_INV(ADM5120_GPIO_P1L2, "usb2", NULL), + LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL), + LED_INV(ADM5120_GPIO_P2L2, "usb3", NULL), + LED_INV(ADM5120_GPIO_P3L0, "lan3", NULL), + LED_INV(ADM5120_GPIO_P3L2, "usb4", NULL), + LED_INV(ADM5120_GPIO_P4L0, "wan", NULL), }; -#endif LED_ARRAY(wp54g) { LED_INV(ADM5120_GPIO_PIN2, "diag", NULL), @@ -240,6 +239,8 @@ LED_ARRAY(generic) { static struct mach_data machines[] __initdata = { MACH_DATA(MACH_ADM5120_GENERIC, generic), /* Compex */ + MACH_DATA(MACH_ADM5120_NP28G, np28g), + MACH_DATA(MACH_ADM5120_NP28GHS, np28g), MACH_DATA(MACH_ADM5120_WP54AG, wp54g), MACH_DATA(MACH_ADM5120_WP54G, wp54g), MACH_DATA(MACH_ADM5120_WP54G_WRT, wp54g), @@ -260,8 +261,6 @@ static struct mach_data machines[] __initdata = { MACH_DATA(MACH_ADM5120_RB_111, rb100), MACH_DATA(MACH_ADM5120_RB_112, rb100), MACH_DATA(MACH_ADM5120_NP27G, np27g), - MACH_DATA(MACH_ADM5120_NP28G, np28g), - MACH_DATA(MACH_ADM5120_NP28GHS, np28g), #endif }; |