diff options
Diffstat (limited to 'package')
14 files changed, 1519 insertions, 73 deletions
diff --git a/package/uboot-lantiq/Makefile b/package/uboot-lantiq/Makefile index 83fa6639b..f13395f68 100644 --- a/package/uboot-lantiq/Makefile +++ b/package/uboot-lantiq/Makefile @@ -112,15 +112,15 @@ endef define Package/uboot-lantiq-$(BUILD_VARIANT)/install mkdir -p $(1) -ifneq ($(findstring flash,$(BUILD_VARIANT)),) +ifneq ($(findstring ramboot,$(BUILD_VARIANT)),) dd \ - if=$(PKG_BUILD_DIR)/$(BUILD_VARIANT)/u-boot-bootstrap.bin \ - of=$(1)/u-boot-bootstrap.bin \ + if=$(PKG_BUILD_DIR)/$(BUILD_VARIANT)/u-boot.bin \ + of=$(1)/u-boot.bin \ bs=64k conv=sync else dd \ - if=$(PKG_BUILD_DIR)/$(BUILD_VARIANT)/u-boot.bin \ - of=$(1)/u-boot.bin \ + if=$(PKG_BUILD_DIR)/$(BUILD_VARIANT)/u-boot-bootstrap.bin \ + of=$(1)/u-boot-bootstrap.bin \ bs=64k conv=sync endif ifneq ($(findstring ramboot,$(BUILD_VARIANT)),) diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/Makefile b/package/uboot-lantiq/files/board/infineon/easy50712/Makefile index b57ff192c..67570505d 100644 --- a/package/uboot-lantiq/files/board/infineon/easy50712/Makefile +++ b/package/uboot-lantiq/files/board/infineon/easy50712/Makefile @@ -24,19 +24,34 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a +BOOTSTRAP_LIB = $(obj)lib$(BOARD)_bootstrap.a + +BOOTSTRAP_LIB-$(CONFIG_BOOTSTRAP) = $(BOOTSTRAP_LIB) -#COBJS := $(BOARD).o COBJS-y += danube.o SOBJS = lowlevel_init.o pmuenable.o -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP) = $(BOARD)_bootstrap.o +BOOTSTRAP_SOBJS-$(CONFIG_BOOTSTRAP) = lowlevel_bootstrap_init.o + +BOOTSTRAP_SRCS := $(BOOTSTRAP_SOBJS-y:.o=.S) $(BOOTSTRAP_COBJS-y:.o=.c) + +SRCS := $(sort $(SOBJS:.o=.S) $(COBJS:.o=.c) $(BOOTSTRAP_SOBJS:.o=.S)) OBJS := $(addprefix $(obj),$(COBJS-y)) SOBJS := $(addprefix $(obj),$(SOBJS)) +BOOTSTRAP_OBJS := $(addprefix $(obj),$(BOOTSTRAP_COBJS-y)) +BOOTSTRAP_SOBJS := $(addprefix $(obj),$(BOOTSTRAP_SOBJS-y)) + + +all: $(obj).depend $(LIB) $(BOOTSTRAP_LIB) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(BOOTSTRAP_LIB): $(BOOTSTRAP_OBJS) $(BOOTSTRAP_SOBJS) + $(AR) $(ARFLAGS) $@ $(BOOTSTRAP_OBJS) $(BOOTSTRAP_SOBJS) + ######################################################################### # defines $(obj).depend target diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/config.mk b/package/uboot-lantiq/files/board/infineon/easy50712/config.mk index c0e5d8244..b110f6f32 100644 --- a/package/uboot-lantiq/files/board/infineon/easy50712/config.mk +++ b/package/uboot-lantiq/files/board/infineon/easy50712/config.mk @@ -26,35 +26,15 @@ # sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp -ifdef CONFIG_LZMA_BOOTSTRAP - -ifdef BUILD_BOOTSTRAP - -$(info BUILD_BOOTSTRAP ) -#TEXT_BASE = 0xB0000000 -TEXT_BASE = 0x80010000 - -else # BUILD_BOOTSTRAP - -ifndef TEXT_BASE -$(info redefine TEXT_BASE = 0x80040000 ) -TEXT_BASE = 0x80040000 -endif - -endif # BUILD_BOOTSTRAP - +ifdef CONFIG_BOOTSTRAP +TEXT_BASE = 0x80001000 +CONFIG_BOOTSTRAP_TEXT_BASE = 0xb0000000 +CONFIG_SYS_RAMBOOT = y else -ifdef BUILD_BOOTSTRAP -$(error BUILD_BOOTSTRAP but not enabled in config) -endif - ifndef TEXT_BASE -## Standard: boot from ebu $(info redefine TEXT_BASE = 0xB0000000 ) TEXT_BASE = 0xB0000000 -## For testing: boot from RAM -# TEXT_BASE = 0x80100000 endif -endif # CONFIG_LZMA_BOOTSTRAP +endif diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/easy50712_bootstrap.c b/package/uboot-lantiq/files/board/infineon/easy50712/easy50712_bootstrap.c new file mode 100644 index 000000000..11bf6d0b7 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/easy50712_bootstrap.c @@ -0,0 +1,48 @@ +/* + * (C) Copyright 2010 Industrie Dial Face S.p.A. + * Luigi 'Comio' Mantellini, luigi.mantellini@idf-hit.com + * + * (C) Copyright 2007 + * Vlad Lungu vlad.lungu@windriver.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/mipsregs.h> +#include <asm/io.h> + +phys_size_t bootstrap_initdram(int board_type) +{ + /* Sdram is setup by assembler code */ + /* If memory could be changed, we should return the true value here */ + return CONFIG_SYS_MAX_RAM; +} + +int bootstrap_checkboard(void) +{ + return 0; +} + +int bootstrap_misc_init_r(void) +{ + set_io_port_base(0); + return 0; +} diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/lowlevel_bootstrap_init.S b/package/uboot-lantiq/files/board/infineon/easy50712/lowlevel_bootstrap_init.S new file mode 100644 index 000000000..216c38145 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/lowlevel_bootstrap_init.S @@ -0,0 +1,606 @@ +/* + * Memory sub-system initialization code for Danube board. + * Andre Messerschmidt + * Copyright (c) 2005 Infineon Technologies AG + * + * Based on Inca-IP code + * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* History: + peng liu May 25, 2006, for PLL setting after reset, 05252006 + */ +#include <config.h> +#include <version.h> +#include <asm/regdef.h> + +#if defined(CONFIG_USE_DDR_RAM) + +#if defined(CONFIG_USE_DDR_RAM_CFG_111M) +#include "ddr_settings_r111.h" +#define DDR111 +#elif defined(CONFIG_USE_DDR_RAM_CFG_166M) +#include "ddr_settings_r166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_e111M) +#include "ddr_settings_e111.h" +#define DDR111 +#elif defined(CONFIG_USE_DDR_RAM_CFG_e166M) +#include "ddr_settings_e166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_promos400) +#include "ddr_settings_PROMOSDDR400.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_samsung166) +#include "ddr_settings_Samsung_166.h" +#define DDR166 +#elif defined(CONFIG_USE_DDR_RAM_CFG_psc166) +#include "ddr_settings_psc_166.h" +#define DDR166 +#else +#warning "missing definition for ddr_settings.h, use default!" +#include "ddr_settings.h" +#endif +#endif /* CONFIG_USE_DDR_RAM */ + +#if defined(CONFIG_USE_DDR_RAM) && !defined(MC_DC0_VALUE) +#error "missing include of ddr_settings.h" +#endif + +#define EBU_MODUL_BASE 0xBE105300 +#define EBU_CLC(value) 0x0000(value) +#define EBU_CON(value) 0x0010(value) +#define EBU_ADDSEL0(value) 0x0020(value) +#define EBU_ADDSEL1(value) 0x0024(value) +#define EBU_ADDSEL2(value) 0x0028(value) +#define EBU_ADDSEL3(value) 0x002C(value) +#define EBU_BUSCON0(value) 0x0060(value) +#define EBU_BUSCON1(value) 0x0064(value) +#define EBU_BUSCON2(value) 0x0068(value) +#define EBU_BUSCON3(value) 0x006C(value) + +#define MC_MODUL_BASE 0xBF800000 +#define MC_ERRCAUSE(value) 0x0010(value) +#define MC_ERRADDR(value) 0x0020(value) +#define MC_CON(value) 0x0060(value) + +#define MC_SRAM_ENABLE 0x00000004 +#define MC_SDRAM_ENABLE 0x00000002 +#define MC_DDRRAM_ENABLE 0x00000001 + +#define MC_SDR_MODUL_BASE 0xBF800200 +#define MC_IOGP(value) 0x0000(value) +#define MC_CTRLENA(value) 0x0010(value) +#define MC_MRSCODE(value) 0x0020(value) +#define MC_CFGDW(value) 0x0030(value) +#define MC_CFGPB0(value) 0x0040(value) +#define MC_LATENCY(value) 0x0080(value) +#define MC_TREFRESH(value) 0x0090(value) +#define MC_SELFRFSH(value) 0x00A0(value) + +#define MC_DDR_MODUL_BASE 0xBF801000 +#define MC_DC00(value) 0x0000(value) +#define MC_DC01(value) 0x0010(value) +#define MC_DC02(value) 0x0020(value) +#define MC_DC03(value) 0x0030(value) +#define MC_DC04(value) 0x0040(value) +#define MC_DC05(value) 0x0050(value) +#define MC_DC06(value) 0x0060(value) +#define MC_DC07(value) 0x0070(value) +#define MC_DC08(value) 0x0080(value) +#define MC_DC09(value) 0x0090(value) +#define MC_DC10(value) 0x00A0(value) +#define MC_DC11(value) 0x00B0(value) +#define MC_DC12(value) 0x00C0(value) +#define MC_DC13(value) 0x00D0(value) +#define MC_DC14(value) 0x00E0(value) +#define MC_DC15(value) 0x00F0(value) +#define MC_DC16(value) 0x0100(value) +#define MC_DC17(value) 0x0110(value) +#define MC_DC18(value) 0x0120(value) +#define MC_DC19(value) 0x0130(value) +#define MC_DC20(value) 0x0140(value) +#define MC_DC21(value) 0x0150(value) +#define MC_DC22(value) 0x0160(value) +#define MC_DC23(value) 0x0170(value) +#define MC_DC24(value) 0x0180(value) +#define MC_DC25(value) 0x0190(value) +#define MC_DC26(value) 0x01A0(value) +#define MC_DC27(value) 0x01B0(value) +#define MC_DC28(value) 0x01C0(value) +#define MC_DC29(value) 0x01D0(value) +#define MC_DC30(value) 0x01E0(value) +#define MC_DC31(value) 0x01F0(value) +#define MC_DC32(value) 0x0200(value) +#define MC_DC33(value) 0x0210(value) +#define MC_DC34(value) 0x0220(value) +#define MC_DC35(value) 0x0230(value) +#define MC_DC36(value) 0x0240(value) +#define MC_DC37(value) 0x0250(value) +#define MC_DC38(value) 0x0260(value) +#define MC_DC39(value) 0x0270(value) +#define MC_DC40(value) 0x0280(value) +#define MC_DC41(value) 0x0290(value) +#define MC_DC42(value) 0x02A0(value) +#define MC_DC43(value) 0x02B0(value) +#define MC_DC44(value) 0x02C0(value) +#define MC_DC45(value) 0x02D0(value) +#define MC_DC46(value) 0x02E0(value) + +#define RCU_OFFSET 0xBF203000 +#define RCU_RST_REQ (RCU_OFFSET + 0x0010) +#define RCU_STS (RCU_OFFSET + 0x0014) + +#define CGU_OFFSET 0xBF103000 +#define PLL0_CFG (CGU_OFFSET + 0x0004) +#define PLL1_CFG (CGU_OFFSET + 0x0008) +#define PLL2_CFG (CGU_OFFSET + 0x000C) +#define CGU_SYS (CGU_OFFSET + 0x0010) +#define CGU_UPDATE (CGU_OFFSET + 0x0014) +#define IF_CLK (CGU_OFFSET + 0x0018) +#define CGU_SMD (CGU_OFFSET + 0x0020) +#define CGU_CT1SR (CGU_OFFSET + 0x0028) +#define CGU_CT2SR (CGU_OFFSET + 0x002C) +#define CGU_PCMCR (CGU_OFFSET + 0x0030) +#define PCI_CR_PCI (CGU_OFFSET + 0x0034) +#define CGU_OSC_CTRL (CGU_OFFSET + 0x001C) +#define CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038) +#define CLK_MEASURE (CGU_OFFSET + 0x003C) + +//05252006 +#define pll0_35MHz_CONFIG 0x9D861059 +#define pll1_35MHz_CONFIG 0x1A260CD9 +#define pll2_35MHz_CONFIG 0x8000f1e5 +#define pll0_36MHz_CONFIG 0x1000125D +#define pll1_36MHz_CONFIG 0x1B1E0C99 +#define pll2_36MHz_CONFIG 0x8002f2a1 +//05252006 + +//06063001-joelin disable the PCI CFRAME mask -start +/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out. +But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled. + +The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus. +The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function. +*/ +#define PCI_CR_PR_OFFSET 0xBE105400 +#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030) +#define PCI_CONFIG_SPACE 0xB7000000 +#define CS_CFM (PCI_CONFIG_SPACE + 0x6C) +//06063001-joelin disable the PCI CFRAME mask -end + .set noreorder + + +/* + * void ebu_init(void) + */ + .globl ebu_init + .ent ebu_init +ebu_init: + +#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \ + defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \ + defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \ + defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3) + + li t1, EBU_MODUL_BASE +#if defined(CONFIG_EBU_ADDSEL0) + li t2, CONFIG_EBU_ADDSEL0 + sw t2, EBU_ADDSEL0(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL1) + li t2, CONFIG_EBU_ADDSEL1 + sw t2, EBU_ADDSEL1(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL2) + li t2, CONFIG_EBU_ADDSEL2 + sw t2, EBU_ADDSEL2(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL3) + li t2, CONFIG_EBU_ADDSEL3 + sw t2, EBU_ADDSEL3(t1) +#endif + +#if defined(CONFIG_EBU_BUSCON0) + li t2, CONFIG_EBU_BUSCON0 + sw t2, EBU_BUSCON0(t1) +#endif +#if defined(CONFIG_EBU_BUSCON1) + li t2, CONFIG_EBU_BUSCON1 + sw t2, EBU_BUSCON1(t1) +#endif +#if defined(CONFIG_EBU_BUSCON2) + li t2, CONFIG_EBU_BUSCON2 + sw t2, EBU_BUSCON2(t1) +#endif +#if defined(CONFIG_EBU_BUSCON3) + li t2, CONFIG_EBU_BUSCON3 + sw t2, EBU_BUSCON3(t1) +#endif + +#endif + + j ra + nop + + .end ebu_init + + +/* + * void cgu_init(long) + * + * a0 has the clock value + */ + .globl cgu_init + .ent cgu_init +cgu_init: + li t2, CGU_SYS + lw t2,0(t2) + beq t2,a0,freq_up2date + nop + + li t2, RCU_STS + lw t2, 0(t2) + and t2,0x00020000 + beq t2,0x00020000,boot_36MHZ + nop +//05252006 + li t1, PLL0_CFG + li t2, pll0_35MHz_CONFIG + sw t2,0(t1) + li t1, PLL1_CFG + li t2, pll1_35MHz_CONFIG + sw t2,0(t1) + li t1, PLL2_CFG + li t2, pll2_35MHz_CONFIG + sw t2,0(t1) + li t1, CGU_SYS + sw a0,0(t1) + li t1, RCU_RST_REQ + li t2, 0x40000008 + sw t2,0(t1) + b wait_reset + nop +boot_36MHZ: + li t1, PLL0_CFG + li t2, pll0_36MHz_CONFIG + sw t2,0(t1) + li t1, PLL1_CFG + li t2, pll1_36MHz_CONFIG + sw t2,0(t1) + li t1, PLL2_CFG + li t2, pll2_36MHz_CONFIG + sw t2,0(t1) + li t1, CGU_SYS + sw a0,0(t1) + li t1, RCU_RST_REQ + li t2, 0x40000008 + sw t2,0(t1) +//05252006 + +wait_reset: + b wait_reset + nop +freq_up2date: + j ra + nop + + .end cgu_init + +#ifndef CONFIG_USE_DDR_RAM +/* + * void sdram_init(long) + * + * a0 has the clock value + */ + .globl sdram_init + .ent sdram_init +sdram_init: + + /* SDRAM Initialization + */ + li t1, MC_MODUL_BASE + + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Enable SDRAM module in memory controller */ + li t3, MC_SDRAM_ENABLE + lw t2, MC_CON(t1) + or t3, t2, t3 + sw t3, MC_CON(t1) + + li t1, MC_SDR_MODUL_BASE + + /* disable the controller */ + li t2, 0 + sw t2, MC_CTRLENA(t1) + + li t2, 0x822 + sw t2, MC_IOGP(t1) + + li t2, 0x2 + sw t2, MC_CFGDW(t1) + + /* Set CAS Latency */ + li t2, 0x00000020 + sw t2, MC_MRSCODE(t1) + + /* Set CS0 to SDRAM parameters */ + li t2, 0x000014d8 + sw t2, MC_CFGPB0(t1) + + /* Set SDRAM latency parameters */ + li t2, 0x00036325; /* BC PC100 */ + sw t2, MC_LATENCY(t1) + + /* Set SDRAM refresh rate */ + li t2, 0x00000C30 + sw t2, MC_TREFRESH(t1) + + /* Clear Power-down registers */ + sw zero, MC_SELFRFSH(t1) + + /* Finally enable the controller */ + li t2, 1 + sw t2, MC_CTRLENA(t1) + + j ra + nop + + .end sdram_init + +#endif /* !CONFIG_USE_DDR_RAM */ + +#ifdef CONFIG_USE_DDR_RAM +/* + * void ddrram_init(long) + * + * a0 has the clock value + */ + .globl ddrram_init + .ent ddrram_init +ddrram_init: + + /* DDR-DRAM Initialization + */ + li t1, MC_MODUL_BASE + + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Enable DDR module in memory controller */ + li t3, MC_DDRRAM_ENABLE + lw t2, MC_CON(t1) + or t3, t2, t3 + sw t3, MC_CON(t1) + + li t1, MC_DDR_MODUL_BASE + + /* Write configuration to DDR controller registers */ + li t2, MC_DC0_VALUE + sw t2, MC_DC00(t1) + + li t2, MC_DC1_VALUE + sw t2, MC_DC01(t1) + + li t2, MC_DC2_VALUE + sw t2, MC_DC02(t1) + + li t2, MC_DC3_VALUE + sw t2, MC_DC03(t1) + + li t2, MC_DC4_VALUE + sw t2, MC_DC04(t1) + + li t2, MC_DC5_VALUE + sw t2, MC_DC05(t1) + + li t2, MC_DC6_VALUE + sw t2, MC_DC06(t1) + + li t2, MC_DC7_VALUE + sw t2, MC_DC07(t1) + + li t2, MC_DC8_VALUE + sw t2, MC_DC08(t1) + + li t2, MC_DC9_VALUE + sw t2, MC_DC09(t1) + + li t2, MC_DC10_VALUE + sw t2, MC_DC10(t1) + + li t2, MC_DC11_VALUE + sw t2, MC_DC11(t1) + + li t2, MC_DC12_VALUE + sw t2, MC_DC12(t1) + + li t2, MC_DC13_VALUE + sw t2, MC_DC13(t1) + + li t2, MC_DC14_VALUE + sw t2, MC_DC14(t1) + + li t2, MC_DC15_VALUE + sw t2, MC_DC15(t1) + + li t2, MC_DC16_VALUE + sw t2, MC_DC16(t1) + + li t2, MC_DC17_VALUE + sw t2, MC_DC17(t1) + + li t2, MC_DC18_VALUE + sw t2, MC_DC18(t1) + + li t2, MC_DC19_VALUE + sw t2, MC_DC19(t1) + + li t2, MC_DC20_VALUE + sw t2, MC_DC20(t1) + + li t2, MC_DC21_VALUE + sw t2, MC_DC21(t1) + + li t2, MC_DC22_VALUE + sw t2, MC_DC22(t1) + + li t2, MC_DC23_VALUE + sw t2, MC_DC23(t1) + + li t2, MC_DC24_VALUE + sw t2, MC_DC24(t1) + + li t2, MC_DC25_VALUE + sw t2, MC_DC25(t1) + + li t2, MC_DC26_VALUE + sw t2, MC_DC26(t1) + + li t2, MC_DC27_VALUE + sw t2, MC_DC27(t1) + + li t2, MC_DC28_VALUE + sw t2, MC_DC28(t1) + + li t2, MC_DC29_VALUE + sw t2, MC_DC29(t1) + + li t2, MC_DC30_VALUE + sw t2, MC_DC30(t1) + + li t2, MC_DC31_VALUE + sw t2, MC_DC31(t1) + + li t2, MC_DC32_VALUE + sw t2, MC_DC32(t1) + + li t2, MC_DC33_VALUE + sw t2, MC_DC33(t1) + + li t2, MC_DC34_VALUE + sw t2, MC_DC34(t1) + + li t2, MC_DC35_VALUE + sw t2, MC_DC35(t1) + + li t2, MC_DC36_VALUE + sw t2, MC_DC36(t1) + + li t2, MC_DC37_VALUE + sw t2, MC_DC37(t1) + + li t2, MC_DC38_VALUE + sw t2, MC_DC38(t1) + + li t2, MC_DC39_VALUE + sw t2, MC_DC39(t1) + + li t2, MC_DC40_VALUE + sw t2, MC_DC40(t1) + + li t2, MC_DC41_VALUE + sw t2, MC_DC41(t1) + + li t2, MC_DC42_VALUE + sw t2, MC_DC42(t1) + + li t2, MC_DC43_VALUE + sw t2, MC_DC43(t1) + + li t2, MC_DC44_VALUE + sw t2, MC_DC44(t1) + + li t2, MC_DC45_VALUE + sw t2, MC_DC45(t1) + + li t2, MC_DC46_VALUE + sw t2, MC_DC46(t1) + + li t2, 0x00000100 + sw t2, MC_DC03(t1) + + j ra + nop + + .end ddrram_init +#endif /* CONFIG_USE_DDR_RAM */ + + .globl lowlevel_init + .ent lowlevel_init +lowlevel_init: + /* EBU, CGU and SDRAM/DDR-RAM Initialization. + */ + move t0, ra + /* We rely on the fact that non of the following ..._init() functions + * modify t0 + */ +#if defined(DDR166) + /* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */ + li a0,0xe8 +#elif defined(DDR133) + /* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */ + li a0,0xe9 +#else /* defined(DDR111) */ + /* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */ + li a0,0xea +#endif + bal cgu_init + nop + + bal ebu_init + nop + +//06063001-joelin disable the PCI CFRAME mask-start +#ifdef DISABLE_CFRAME + li t1, PCI_CR_PCI //mw bf103034 80000000 + li t2, 0x80000000 + sw t2,0(t1) + + li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 + li t2, 0x103 + sw t2,0(t1) + + li t1, CS_CFM //mw b700006c 0 + li t2, 0x00 + sw t2, 0(t1) + + li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 + li t2, 0x1000103 + sw t2, 0(t1) +#endif +//06063001-joelin disable the PCI CFRAME mask-end + +#ifdef CONFIG_USE_DDR_RAM + bal ddrram_init + nop +#else + bal sdram_init + nop +#endif + move ra, t0 + j ra + nop + + .end lowlevel_init diff --git a/package/uboot-lantiq/files/board/infineon/easy50712/u-boot-bootstrap.lds b/package/uboot-lantiq/files/board/infineon/easy50712/u-boot-bootstrap.lds new file mode 100644 index 000000000..52d7dafad --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50712/u-boot-bootstrap.lds @@ -0,0 +1,74 @@ +/* + * (C) Copyright 2010 Industrie Dial Face S.p.A. + * Luigi 'Comio' Mantellini, luigi.mantellini@idf-hit.com + * + * (C) Copyright 2003 + * Wolfgang Denk Engineering, <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* +OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") +*/ +OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips") +OUTPUT_ARCH(mips) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data) } + + . = .; + _gp = ALIGN(16) +0x7ff0; + + .got : { + __got_start = .; + *(.got) + __got_end = .; + } + + . = ALIGN(4); + .sdata : { *(.sdata) } + + . = .; + . = ALIGN(4); + .payload : { *(.payload) } + . = ALIGN(4); + + uboot_end_data = .; + num_got_entries = (__got_end - __got_start) >> 2; + + . = ALIGN(4); + .sbss : { *(.sbss) } + .bss : { *(.bss) . = ALIGN(4); } + uboot_end = .; +} + diff --git a/package/uboot-lantiq/files/board/infineon/easy50812/Makefile b/package/uboot-lantiq/files/board/infineon/easy50812/Makefile index 44d8ea344..97d189895 100644 --- a/package/uboot-lantiq/files/board/infineon/easy50812/Makefile +++ b/package/uboot-lantiq/files/board/infineon/easy50812/Makefile @@ -24,19 +24,34 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a +BOOTSTRAP_LIB = $(obj)lib$(BOARD)_bootstrap.a + +BOOTSTRAP_LIB-$(CONFIG_BOOTSTRAP) = $(BOOTSTRAP_LIB) -#COBJS := $(BOARD).o COBJS-y += ar9.o SOBJS = lowlevel_init.o pmuenable.o -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +BOOTSTRAP_COBJS-$(CONFIG_BOOTSTRAP) = $(BOARD)_bootstrap.o +BOOTSTRAP_SOBJS-$(CONFIG_BOOTSTRAP) = lowlevel_bootstrap_init.o + +BOOTSTRAP_SRCS := $(BOOTSTRAP_SOBJS-y:.o=.S) $(BOOTSTRAP_COBJS-y:.o=.c) + +SRCS := $(sort $(SOBJS:.o=.S) $(COBJS:.o=.c) $(BOOTSTRAP_SOBJS:.o=.S)) OBJS := $(addprefix $(obj),$(COBJS-y)) SOBJS := $(addprefix $(obj),$(SOBJS)) +BOOTSTRAP_OBJS := $(addprefix $(obj),$(BOOTSTRAP_COBJS-y)) +BOOTSTRAP_SOBJS := $(addprefix $(obj),$(BOOTSTRAP_SOBJS-y)) + + +all: $(obj).depend $(LIB) $(BOOTSTRAP_LIB) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) +$(BOOTSTRAP_LIB): $(BOOTSTRAP_OBJS) $(BOOTSTRAP_SOBJS) + $(AR) $(ARFLAGS) $@ $(BOOTSTRAP_OBJS) $(BOOTSTRAP_SOBJS) + ######################################################################### # defines $(obj).depend target diff --git a/package/uboot-lantiq/files/board/infineon/easy50812/config.mk b/package/uboot-lantiq/files/board/infineon/easy50812/config.mk index c0e5d8244..b110f6f32 100644 --- a/package/uboot-lantiq/files/board/infineon/easy50812/config.mk +++ b/package/uboot-lantiq/files/board/infineon/easy50812/config.mk @@ -26,35 +26,15 @@ # sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp -ifdef CONFIG_LZMA_BOOTSTRAP - -ifdef BUILD_BOOTSTRAP - -$(info BUILD_BOOTSTRAP ) -#TEXT_BASE = 0xB0000000 -TEXT_BASE = 0x80010000 - -else # BUILD_BOOTSTRAP - -ifndef TEXT_BASE -$(info redefine TEXT_BASE = 0x80040000 ) -TEXT_BASE = 0x80040000 -endif - -endif # BUILD_BOOTSTRAP - +ifdef CONFIG_BOOTSTRAP +TEXT_BASE = 0x80001000 +CONFIG_BOOTSTRAP_TEXT_BASE = 0xb0000000 +CONFIG_SYS_RAMBOOT = y else -ifdef BUILD_BOOTSTRAP -$(error BUILD_BOOTSTRAP but not enabled in config) -endif - ifndef TEXT_BASE -## Standard: boot from ebu $(info redefine TEXT_BASE = 0xB0000000 ) TEXT_BASE = 0xB0000000 -## For testing: boot from RAM -# TEXT_BASE = 0x80100000 endif -endif # CONFIG_LZMA_BOOTSTRAP +endif diff --git a/package/uboot-lantiq/files/board/infineon/easy50812/easy50812_bootstrap.c b/package/uboot-lantiq/files/board/infineon/easy50812/easy50812_bootstrap.c new file mode 100644 index 000000000..11bf6d0b7 --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50812/easy50812_bootstrap.c @@ -0,0 +1,48 @@ +/* + * (C) Copyright 2010 Industrie Dial Face S.p.A. + * Luigi 'Comio' Mantellini, luigi.mantellini@idf-hit.com + * + * (C) Copyright 2007 + * Vlad Lungu vlad.lungu@windriver.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <asm/mipsregs.h> +#include <asm/io.h> + +phys_size_t bootstrap_initdram(int board_type) +{ + /* Sdram is setup by assembler code */ + /* If memory could be changed, we should return the true value here */ + return CONFIG_SYS_MAX_RAM; +} + +int bootstrap_checkboard(void) +{ + return 0; +} + +int bootstrap_misc_init_r(void) +{ + set_io_port_base(0); + return 0; +} diff --git a/package/uboot-lantiq/files/board/infineon/easy50812/lowlevel_bootstrap_init.S b/package/uboot-lantiq/files/board/infineon/easy50812/lowlevel_bootstrap_init.S new file mode 100644 index 000000000..ec82e231c --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50812/lowlevel_bootstrap_init.S @@ -0,0 +1,597 @@ +/* + * Memory sub-system initialization code for Danube board. + * Andre Messerschmidt + * Copyright (c) 2005 Infineon Technologies AG + * + * Based on Inca-IP code + * Copyright (c) 2003 Wolfgang Denk <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +/* History: + peng liu May 25, 2006, for PLL setting after reset, 05252006 + */ +#include <config.h> +#include <version.h> +#include <asm/regdef.h> + +#if defined(CONFIG_USE_DDR_RAM) + +#if defined(CONFIG_CPU_111M_RAM_111M) || defined(CONFIG_CPU_333M_RAM_111M) +# include "ar9_ddr111_settings.h" +#elif defined(CONFIG_CPU_166M_RAM_166M) || defined(CONFIG_CPU_333M_RAM_166M) || defined(CONFIG_CPU_500M_RAM_166M) +# include "ar9_ddr166_settings.h" +#elif defined(CONFIG_CPU_442M_RAM_147M) +# include "ar9_ddr166_settings.h" +#elif defined(CONFIG_CPU_393M_RAM_196M) +# ifdef CONFIG_ETRON_RAM +# include "etron_ddr196_settings.h" +# else +# include "ar9_ddr196_settings.h" +# endif +#elif defined(CONFIG_CPU_442M_RAM_221M) +# include "ar9_ddr221_settings.h" +#elif defined(CONFIG_CPU_500M_RAM_250M) +# include "ar9_ddr250_settings.h" +#else +# warning "missing definition for ddr_settings.h, use default!" +# include "ar9_ddr_settings.h" +#endif +#endif /* CONFIG_USE_DDR_RAM */ + +#define EBU_MODUL_BASE 0xBE105300 +#define EBU_CLC(value) 0x0000(value) +#define EBU_CON(value) 0x0010(value) +#define EBU_ADDSEL0(value) 0x0020(value) +#define EBU_ADDSEL1(value) 0x0024(value) +#define EBU_ADDSEL2(value) 0x0028(value) +#define EBU_ADDSEL3(value) 0x002C(value) +#define EBU_BUSCON0(value) 0x0060(value) +#define EBU_BUSCON1(value) 0x0064(value) +#define EBU_BUSCON2(value) 0x0068(value) +#define EBU_BUSCON3(value) 0x006C(value) + +#define MC_MODUL_BASE 0xBF800000 +#define MC_ERRCAUSE(value) 0x0010(value) +#define MC_ERRADDR(value) 0x0020(value) +#define MC_CON(value) 0x0060(value) + +#define MC_SRAM_ENABLE 0x00000004 +#define MC_SDRAM_ENABLE 0x00000002 +#define MC_DDRRAM_ENABLE 0x00000001 + +#define MC_SDR_MODUL_BASE 0xBF800200 +#define MC_IOGP(value) 0x0000(value) +#define MC_CTRLENA(value) 0x0010(value) +#define MC_MRSCODE(value) 0x0020(value) +#define MC_CFGDW(value) 0x0030(value) +#define MC_CFGPB0(value) 0x0040(value) +#define MC_LATENCY(value) 0x0080(value) +#define MC_TREFRESH(value) 0x0090(value) +#define MC_SELFRFSH(value) 0x00A0(value) + +#define MC_DDR_MODUL_BASE 0xBF801000 +#define MC_DC00(value) 0x0000(value) +#define MC_DC01(value) 0x0010(value) +#define MC_DC02(value) 0x0020(value) +#define MC_DC03(value) 0x0030(value) +#define MC_DC04(value) 0x0040(value) +#define MC_DC05(value) 0x0050(value) +#define MC_DC06(value) 0x0060(value) +#define MC_DC07(value) 0x0070(value) +#define MC_DC08(value) 0x0080(value) +#define MC_DC09(value) 0x0090(value) +#define MC_DC10(value) 0x00A0(value) +#define MC_DC11(value) 0x00B0(value) +#define MC_DC12(value) 0x00C0(value) +#define MC_DC13(value) 0x00D0(value) +#define MC_DC14(value) 0x00E0(value) +#define MC_DC15(value) 0x00F0(value) +#define MC_DC16(value) 0x0100(value) +#define MC_DC17(value) 0x0110(value) +#define MC_DC18(value) 0x0120(value) +#define MC_DC19(value) 0x0130(value) +#define MC_DC20(value) 0x0140(value) +#define MC_DC21(value) 0x0150(value) +#define MC_DC22(value) 0x0160(value) +#define MC_DC23(value) 0x0170(value) +#define MC_DC24(value) 0x0180(value) +#define MC_DC25(value) 0x0190(value) +#define MC_DC26(value) 0x01A0(value) +#define MC_DC27(value) 0x01B0(value) +#define MC_DC28(value) 0x01C0(value) +#define MC_DC29(value) 0x01D0(value) +#define MC_DC30(value) 0x01E0(value) +#define MC_DC31(value) 0x01F0(value) +#define MC_DC32(value) 0x0200(value) +#define MC_DC33(value) 0x0210(value) +#define MC_DC34(value) 0x0220(value) +#define MC_DC35(value) 0x0230(value) +#define MC_DC36(value) 0x0240(value) +#define MC_DC37(value) 0x0250(value) +#define MC_DC38(value) 0x0260(value) +#define MC_DC39(value) 0x0270(value) +#define MC_DC40(value) 0x0280(value) +#define MC_DC41(value) 0x0290(value) +#define MC_DC42(value) 0x02A0(value) +#define MC_DC43(value) 0x02B0(value) +#define MC_DC44(value) 0x02C0(value) +#define MC_DC45(value) 0x02D0(value) +#define MC_DC46(value) 0x02E0(value) + +#define RCU_OFFSET 0xBF203000 +#define RCU_RST_REQ (RCU_OFFSET + 0x0010) +#define RCU_STS (RCU_OFFSET + 0x0014) + +#define CGU_OFFSET 0xBF103000 +#define PLL0_CFG (CGU_OFFSET + 0x0004) +#define PLL1_CFG (CGU_OFFSET + 0x0008) +#define PLL2_CFG (CGU_OFFSET + 0x000C) +#define CGU_SYS (CGU_OFFSET + 0x0010) +#define CGU_UPDATE (CGU_OFFSET + 0x0014) +#define IF_CLK (CGU_OFFSET + 0x0018) +#define CGU_SMD (CGU_OFFSET + 0x0020) +#define CGU_CT1SR (CGU_OFFSET + 0x0028) +#define CGU_CT2SR (CGU_OFFSET + 0x002C) +#define CGU_PCMCR (CGU_OFFSET + 0x0030) +#define PCI_CR_PCI (CGU_OFFSET + 0x0034) +#define CGU_OSC_CTRL (CGU_OFFSET + 0x001C) +#define CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038) +#define CLK_MEASURE (CGU_OFFSET + 0x003C) + +//05252006 +#define pll0_35MHz_CONFIG 0x9D861059 +#define pll1_35MHz_CONFIG 0x1A260CD9 +#define pll2_35MHz_CONFIG 0x8000f1e5 +#define pll0_36MHz_CONFIG 0x1000125D +#define pll1_36MHz_CONFIG 0x1B1E0C99 +#define pll2_36MHz_CONFIG 0x8002f2a1 +//05252006 + +//06063001-joelin disable the PCI CFRAME mask -start +/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out. +But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled. + +The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus. +The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function. +*/ +#define PCI_CR_PR_OFFSET 0xBE105400 +#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030) +#define PCI_CONFIG_SPACE 0xB7000000 +#define CS_CFM (PCI_CONFIG_SPACE + 0x6C) +//06063001-joelin disable the PCI CFRAME mask -end + .set noreorder + + +/* + * void ebu_init(void) + */ + .globl ebu_init + .ent ebu_init +ebu_init: + +#if defined(CONFIG_EBU_ADDSEL0) || defined(CONFIG_EBU_ADDSEL1) || \ + defined(CONFIG_EBU_ADDSEL2) || defined(CONFIG_EBU_ADDSEL3) || \ + defined(CONFIG_EBU_BUSCON0) || defined(CONFIG_EBU_BUSCON1) || \ + defined(CONFIG_EBU_BUSCON2) || defined(CONFIG_EBU_BUSCON3) + + li t1, EBU_MODUL_BASE +#if defined(CONFIG_EBU_ADDSEL0) + li t2, CONFIG_EBU_ADDSEL0 + sw t2, EBU_ADDSEL0(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL1) + li t2, CONFIG_EBU_ADDSEL1 + sw t2, EBU_ADDSEL1(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL2) + li t2, CONFIG_EBU_ADDSEL2 + sw t2, EBU_ADDSEL2(t1) +#endif +#if defined(CONFIG_EBU_ADDSEL3) + li t2, CONFIG_EBU_ADDSEL3 + sw t2, EBU_ADDSEL3(t1) +#endif + +#if defined(CONFIG_EBU_BUSCON0) + li t2, CONFIG_EBU_BUSCON0 + sw t2, EBU_BUSCON0(t1) +#endif +#if defined(CONFIG_EBU_BUSCON1) + li t2, CONFIG_EBU_BUSCON1 + sw t2, EBU_BUSCON1(t1) +#endif +#if defined(CONFIG_EBU_BUSCON2) + li t2, CONFIG_EBU_BUSCON2 + sw t2, EBU_BUSCON2(t1) +#endif +#if defined(CONFIG_EBU_BUSCON3) + li t2, CONFIG_EBU_BUSCON3 + sw t2, EBU_BUSCON3(t1) +#endif + +#endif + + j ra + nop + + .end ebu_init + + +/* + * void cgu_init(long) + * + * a0 has the clock value + */ + .globl cgu_init + .ent cgu_init +cgu_init: + li t2, CGU_SYS + lw t2,0(t2) + beq t2,a0,freq_up2date + nop + + li t2, RCU_STS + lw t2, 0(t2) + and t2,0x00020000 + beq t2,0x00020000,boot_36MHZ + nop +//05252006 + li t1, PLL0_CFG + li t2, pll0_35MHz_CONFIG + sw t2,0(t1) + li t1, PLL1_CFG + li t2, pll1_35MHz_CONFIG + sw t2,0(t1) + li t1, PLL2_CFG + li t2, pll2_35MHz_CONFIG + sw t2,0(t1) + li t1, CGU_SYS + sw a0,0(t1) + li t1, RCU_RST_REQ + li t2, 0x40000008 + sw t2,0(t1) + b wait_reset + nop +boot_36MHZ: + li t1, PLL0_CFG + li t2, pll0_36MHz_CONFIG + sw t2,0(t1) + li t1, PLL1_CFG + li t2, pll1_36MHz_CONFIG + sw t2,0(t1) + li t1, PLL2_CFG + li t2, pll2_36MHz_CONFIG + sw t2,0(t1) + li t1, CGU_SYS + sw a0,0(t1) + li t1, RCU_RST_REQ + li t2, 0x40000008 + sw t2,0(t1) +//05252006 + +wait_reset: + b wait_reset + nop +freq_up2date: + j ra + nop + + .end cgu_init + +#ifndef CONFIG_USE_DDR_RAM +/* + * void sdram_init(long) + * + * a0 has the clock value + */ + .globl sdram_init + .ent sdram_init +sdram_init: + + /* SDRAM Initialization + */ + li t1, MC_MODUL_BASE + + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Enable SDRAM module in memory controller */ + li t3, MC_SDRAM_ENABLE + lw t2, MC_CON(t1) + or t3, t2, t3 + sw t3, MC_CON(t1) + + li t1, MC_SDR_MODUL_BASE + + /* disable the controller */ + li t2, 0 + sw t2, MC_CTRLENA(t1) + + li t2, 0x822 + sw t2, MC_IOGP(t1) + + li t2, 0x2 + sw t2, MC_CFGDW(t1) + + /* Set CAS Latency */ + li t2, 0x00000020 + sw t2, MC_MRSCODE(t1) + + /* Set CS0 to SDRAM parameters */ + li t2, 0x000014d8 + sw t2, MC_CFGPB0(t1) + + /* Set SDRAM latency parameters */ + li t2, 0x00036325; /* BC PC100 */ + sw t2, MC_LATENCY(t1) + + /* Set SDRAM refresh rate */ + li t2, 0x00000C30 + sw t2, MC_TREFRESH(t1) + + /* Clear Power-down registers */ + sw zero, MC_SELFRFSH(t1) + + /* Finally enable the controller */ + li t2, 1 + sw t2, MC_CTRLENA(t1) + + j ra + nop + + .end sdram_init + +#endif /* !CONFIG_USE_DDR_RAM */ + +#ifdef CONFIG_USE_DDR_RAM +/* + * void ddrram_init(long) + * + * a0 has the clock value + */ + .globl ddrram_init + .ent ddrram_init +ddrram_init: + + /* DDR-DRAM Initialization + */ + li t1, MC_MODUL_BASE + + /* Clear Error log registers */ + sw zero, MC_ERRCAUSE(t1) + sw zero, MC_ERRADDR(t1) + + /* Enable DDR module in memory controller */ + li t3, MC_DDRRAM_ENABLE + lw t2, MC_CON(t1) + or t3, t2, t3 + sw t3, MC_CON(t1) + + li t1, MC_DDR_MODUL_BASE + + /* Write configuration to DDR controller registers */ + li t2, MC_DC0_VALUE + sw t2, MC_DC00(t1) + + li t2, MC_DC1_VALUE + sw t2, MC_DC01(t1) + + li t2, MC_DC2_VALUE + sw t2, MC_DC02(t1) + + li t2, MC_DC3_VALUE + sw t2, MC_DC03(t1) + + li t2, MC_DC4_VALUE + sw t2, MC_DC04(t1) + + li t2, MC_DC5_VALUE + sw t2, MC_DC05(t1) + + li t2, MC_DC6_VALUE + sw t2, MC_DC06(t1) + + li t2, MC_DC7_VALUE + sw t2, MC_DC07(t1) + + li t2, MC_DC8_VALUE + sw t2, MC_DC08(t1) + + li t2, MC_DC9_VALUE + sw t2, MC_DC09(t1) + + li t2, MC_DC10_VALUE + sw t2, MC_DC10(t1) + + li t2, MC_DC11_VALUE + sw t2, MC_DC11(t1) + + li t2, MC_DC12_VALUE + sw t2, MC_DC12(t1) + + li t2, MC_DC13_VALUE + sw t2, MC_DC13(t1) + + li t2, MC_DC14_VALUE + sw t2, MC_DC14(t1) + + li t2, MC_DC15_VALUE + sw t2, MC_DC15(t1) + + li t2, MC_DC16_VALUE + sw t2, MC_DC16(t1) + + li t2, MC_DC17_VALUE + sw t2, MC_DC17(t1) + + li t2, MC_DC18_VALUE + sw t2, MC_DC18(t1) + + li t2, MC_DC19_VALUE + sw t2, MC_DC19(t1) + + li t2, MC_DC20_VALUE + sw t2, MC_DC20(t1) + + li t2, MC_DC21_VALUE + sw t2, MC_DC21(t1) + + li t2, MC_DC22_VALUE + sw t2, MC_DC22(t1) + + li t2, MC_DC23_VALUE + sw t2, MC_DC23(t1) + + li t2, MC_DC24_VALUE + sw t2, MC_DC24(t1) + + li t2, MC_DC25_VALUE + sw t2, MC_DC25(t1) + + li t2, MC_DC26_VALUE + sw t2, MC_DC26(t1) + + li t2, MC_DC27_VALUE + sw t2, MC_DC27(t1) + + li t2, MC_DC28_VALUE + sw t2, MC_DC28(t1) + + li t2, MC_DC29_VALUE + sw t2, MC_DC29(t1) + + li t2, MC_DC30_VALUE + sw t2, MC_DC30(t1) + + li t2, MC_DC31_VALUE + sw t2, MC_DC31(t1) + + li t2, MC_DC32_VALUE + sw t2, MC_DC32(t1) + + li t2, MC_DC33_VALUE + sw t2, MC_DC33(t1) + + li t2, MC_DC34_VALUE + sw t2, MC_DC34(t1) + + li t2, MC_DC35_VALUE + sw t2, MC_DC35(t1) + + li t2, MC_DC36_VALUE + sw t2, MC_DC36(t1) + + li t2, MC_DC37_VALUE + sw t2, MC_DC37(t1) + + li t2, MC_DC38_VALUE + sw t2, MC_DC38(t1) + + li t2, MC_DC39_VALUE + sw t2, MC_DC39(t1) + + li t2, MC_DC40_VALUE + sw t2, MC_DC40(t1) + + li t2, MC_DC41_VALUE + sw t2, MC_DC41(t1) + + li t2, MC_DC42_VALUE + sw t2, MC_DC42(t1) + + li t2, MC_DC43_VALUE + sw t2, MC_DC43(t1) + + li t2, MC_DC44_VALUE + sw t2, MC_DC44(t1) + + li t2, MC_DC45_VALUE + sw t2, MC_DC45(t1) + + li t2, MC_DC46_VALUE + sw t2, MC_DC46(t1) + + li t2, 0x00000100 + sw t2, MC_DC03(t1) + + j ra + nop + + .end ddrram_init +#endif /* CONFIG_USE_DDR_RAM */ + + .globl lowlevel_init + .ent lowlevel_init +lowlevel_init: + /* EBU, CGU and SDRAM/DDR-RAM Initialization. + */ + move t0, ra + /* We rely on the fact that non of the following ..._init() functions + * modify t0 + */ +#if defined(DDR166) + /* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */ + li a0,0xe8 +#elif defined(DDR133) + /* 0xe9 means CPU0/CPU1 333M, DDR 133M, FPI 83M, PPE 240M */ + li a0,0xe9 +#else /* defined(DDR111) */ + /* 0xea means CPU0/CPU1 333M, DDR 111M, FPI 83M, PPE 240M */ + li a0,0xea +#endif + bal cgu_init + nop + + bal ebu_init + nop + +//06063001-joelin disable the PCI CFRAME mask-start +#ifdef DISABLE_CFRAME + li t1, PCI_CR_PCI //mw bf103034 80000000 + li t2, 0x80000000 + sw t2,0(t1) + + li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 + li t2, 0x103 + sw t2,0(t1) + + li t1, CS_CFM //mw b700006c 0 + li t2, 0x00 + sw t2, 0(t1) + + li t1, PCI_CR_PCI_MOD_REG //mw be105430 103 + li t2, 0x1000103 + sw t2, 0(t1) +#endif +//06063001-joelin disable the PCI CFRAME mask-end + +#ifdef CONFIG_USE_DDR_RAM + bal ddrram_init + nop +#else + bal sdram_init + nop +#endif + move ra, t0 + j ra + nop + + .end lowlevel_init diff --git a/package/uboot-lantiq/files/board/infineon/easy50812/u-boot-bootstrap.lds b/package/uboot-lantiq/files/board/infineon/easy50812/u-boot-bootstrap.lds new file mode 100644 index 000000000..52d7dafad --- /dev/null +++ b/package/uboot-lantiq/files/board/infineon/easy50812/u-boot-bootstrap.lds @@ -0,0 +1,74 @@ +/* + * (C) Copyright 2010 Industrie Dial Face S.p.A. + * Luigi 'Comio' Mantellini, luigi.mantellini@idf-hit.com + * + * (C) Copyright 2003 + * Wolfgang Denk Engineering, <wd@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* +OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips") +*/ +OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips") +OUTPUT_ARCH(mips) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data) } + + . = .; + _gp = ALIGN(16) +0x7ff0; + + .got : { + __got_start = .; + *(.got) + __got_end = .; + } + + . = ALIGN(4); + .sdata : { *(.sdata) } + + . = .; + . = ALIGN(4); + .payload : { *(.payload) } + . = ALIGN(4); + + uboot_end_data = .; + num_got_entries = (__got_end - __got_start) >> 2; + + . = ALIGN(4); + .sbss : { *(.sbss) } + .bss : { *(.bss) . = ALIGN(4); } + uboot_end = .; +} + diff --git a/package/uboot-lantiq/files/include/configs/ifx-common.h b/package/uboot-lantiq/files/include/configs/ifx-common.h index 6307e707e..8b194d0e7 100644 --- a/package/uboot-lantiq/files/include/configs/ifx-common.h +++ b/package/uboot-lantiq/files/include/configs/ifx-common.h @@ -181,4 +181,12 @@ #endif #endif +#ifdef CONFIG_BOOTSTRAP +#define CONFIG_BOOTSTRAP_BASE CONFIG_BOOTSTRAP_TEXT_BASE +#define CONFIG_BOOTSTRAP_BAUDRATE CONFIG_BAUDRATE +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOOTSTRAP_LZMA +#define CONFIG_BOOTSTRAP_SERIAL +#endif + #endif /* __IFX_COMMON_H */ diff --git a/package/uboot-lantiq/patches/100-ifx_targets.patch b/package/uboot-lantiq/patches/100-ifx_targets.patch index 7033f913f..dcd931cb8 100644 --- a/package/uboot-lantiq/patches/100-ifx_targets.patch +++ b/package/uboot-lantiq/patches/100-ifx_targets.patch @@ -1,6 +1,6 @@ --- a/MAKEALL +++ b/MAKEALL -@@ -730,6 +730,12 @@ LIST_arm=" \ +@@ -730,6 +730,12 @@ ## MIPS Systems (default = big endian) ######################################################################### @@ -13,7 +13,7 @@ LIST_mips4kc=" \ incaip \ qemu_mips \ -@@ -761,6 +767,7 @@ LIST_au1xx0=" \ +@@ -761,6 +767,7 @@ " LIST_mips=" \ @@ -23,7 +23,7 @@ ${LIST_au1xx0} \ --- a/Makefile +++ b/Makefile -@@ -447,7 +447,7 @@ $(obj)include/autoconf.mk: $(obj)include +@@ -447,7 +447,7 @@ set -e ; \ : Extract the config macros ; \ $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ @@ -32,7 +32,7 @@ mv $@.tmp $@ ######################################################################### -@@ -3370,7 +3370,7 @@ incaip_config: unconfig +@@ -3370,7 +3370,7 @@ { echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \ $(XECHO) "... with 150MHz system clock" ; \ } @@ -41,7 +41,7 @@ tb0229_config: unconfig @$(MKCONFIG) $(@:_config=) mips mips tb0229 -@@ -3411,6 +3411,50 @@ vct_platinumavc_onenand_small_config: un +@@ -3411,6 +3411,53 @@ @$(MKCONFIG) -a vct mips mips vct micronas ######################################################################### @@ -56,8 +56,9 @@ + echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \ + $(XECHO) "... with ramboot configuration" ; \ + } -+ @if [ "$(findstring _DDR,$@)" ] ; then \ ++ @if [ "$(findstring _DDR,$@)" -a -z "$(findstring ramboot,$@)" ] ; then \ + echo "#define CONFIG_USE_DDR_RAM" >>$(obj)include/config.h ; \ ++ echo "#define CONFIG_BOOTSTRAP" >>$(obj)include/config.h ; \ + DDR=$(subst DDR,,$(filter DDR%,$(subst _, ,$@))); \ + case "$${DDR}" in \ + 111M|166M|e111M|e166M|promos400|samsung166|psc166) \ @@ -73,11 +74,13 @@ + @mkdir -p $(obj)board/infineon/easy50812 + @[ -z "$(findstring ramboot,$@)" ] || \ + { echo "TEXT_BASE = 0xA0400000" >$(obj)board/infineon/easy50812/config.tmp ; \ ++ echo "CONFIG_BOOTSTRAP = 0" >>$(obj)board/infineon/easy50812/config.tmp ; \ + echo "#define CONFIG_SYS_RAMBOOT" >>$(obj)include/config.h ; \ + $(XECHO) "... with ramboot configuration" ; \ + } -+ @if [ "$(findstring _DDR,$@)" ] ; then \ ++ @if [ "$(findstring _DDR,$@)" -a -z "$(findstring ramboot,$@)" ] ; then \ + echo "#define CONFIG_USE_DDR_RAM" >>$(obj)include/config.h ; \ ++ echo "#define CONFIG_BOOTSTRAP" >>$(obj)include/config.h ; \ + DDR=$(subst DDR,,$(filter DDR%,$(subst _, ,$@))); \ + case "$${DDR}" in \ + 111M|166M|e111M|e166M|promos400|samsung166|psc166) \ @@ -94,7 +97,7 @@ --- a/drivers/net/Makefile +++ b/drivers/net/Makefile -@@ -43,6 +43,7 @@ COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o +@@ -43,6 +43,7 @@ COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o COBJS-$(CONFIG_FTMAC100) += ftmac100.o COBJS-$(CONFIG_GRETH) += greth.o @@ -104,7 +107,7 @@ COBJS-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile -@@ -28,6 +28,7 @@ LIB := $(obj)libserial.a +@@ -28,6 +28,7 @@ COBJS-$(CONFIG_ARM_DCC) += arm_dcc.o COBJS-$(CONFIG_AT91RM9200_USART) += at91rm9200_usart.o COBJS-$(CONFIG_ATMEL_USART) += atmel_usart.o @@ -114,7 +117,7 @@ COBJS-$(CONFIG_SYS_NS16550) += ns16550.o --- a/include/netdev.h +++ b/include/netdev.h -@@ -57,6 +57,7 @@ int fecmxc_initialize (bd_t *bis); +@@ -57,6 +57,7 @@ int ftmac100_initialize(bd_t *bits); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); @@ -122,7 +125,7 @@ int inca_switch_initialize(bd_t *bis); int kirkwood_egiga_initialize(bd_t *bis); int lan91c96_initialize(u8 dev_num, int base_addr); -@@ -85,6 +86,7 @@ int uec_standard_init(bd_t *bis); +@@ -85,6 +86,7 @@ int uli526x_initialize(bd_t *bis); int sh_eth_initialize(bd_t *bis); int dm9000_initialize(bd_t *bis); diff --git a/package/uboot-lantiq/patches/200-httpd.patch b/package/uboot-lantiq/patches/200-httpd.patch index 3c7bdbd4a..b0ab3b6af 100644 --- a/package/uboot-lantiq/patches/200-httpd.patch +++ b/package/uboot-lantiq/patches/200-httpd.patch @@ -5647,13 +5647,11 @@ --- a/common/main.c +++ b/common/main.c -@@ -273,6 +273,10 @@ static __inline__ int abortboot(int boot +@@ -273,6 +273,8 @@ static __inline__ int abortboot(int boot void main_loop (void) { -+#ifdef CONFIG_CMD_HTTPD + int ret; -+#endif + #ifndef CONFIG_SYS_HUSH_PARSER static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, }; |