diff options
Diffstat (limited to 'package/system/utils/robocfg/src')
| -rw-r--r-- | package/system/utils/robocfg/src/Makefile | 11 | ||||
| -rw-r--r-- | package/system/utils/robocfg/src/etc53xx.h | 619 | ||||
| -rw-r--r-- | package/system/utils/robocfg/src/robocfg.c | 581 |
3 files changed, 1211 insertions, 0 deletions
diff --git a/package/system/utils/robocfg/src/Makefile b/package/system/utils/robocfg/src/Makefile new file mode 100644 index 000000000..e11acb020 --- /dev/null +++ b/package/system/utils/robocfg/src/Makefile @@ -0,0 +1,11 @@ + +all: robocfg + +%.o: %.c + $(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $^ + +robocfg: robocfg.o + $(CC) -o $@ $^ + +clean: + rm -f *.o robocfg diff --git a/package/system/utils/robocfg/src/etc53xx.h b/package/system/utils/robocfg/src/etc53xx.h new file mode 100644 index 000000000..d5b1310cb --- /dev/null +++ b/package/system/utils/robocfg/src/etc53xx.h @@ -0,0 +1,619 @@ +/* + * Broadcom Home Gateway Reference Design + * BCM53xx Register definitions + * + * Copyright 2004, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + */ + +#ifndef __BCM535M_H_ +#define __BCM535M_H_ + +/* ROBO embedded device type */ +#define ROBO_DEV_5380 1 +#define ROBO_DEV_5365 2 +#define ROBO_DEV_5350 3 + +/* BCM5325m GLOBAL PAGE REGISTER MAP */ +#ifndef _CFE_ +#pragma pack(1) +#endif + +/* BCM5325m Serial Management Port (SMP) Page offsets */ +#define ROBO_CTRL_PAGE 0x00 /* Control registers */ +#define ROBO_STAT_PAGE 0x01 /* Status register */ +#define ROBO_MGMT_PAGE 0x02 /* Management Mode registers */ +#define ROBO_MIB_AC_PAGE 0x03 /* MIB Autocast registers */ +#define ROBO_ARLCTRL_PAGE 0x04 /* ARL Control Registers */ +#define ROBO_ARLIO_PAGE 0x05 /* ARL Access Registers */ +#define ROBO_FRAMEBUF_PAGE 0x06 /* Management frame access registers */ +#define ROBO_MEM_ACCESS_PAGE 0x08 /* Memory access registers */ + +/* PHY Registers */ +#define ROBO_PORT0_MII_PAGE 0x10 /* Port 0 MII Registers */ +#define ROBO_PORT1_MII_PAGE 0x11 /* Port 1 MII Registers */ +#define ROBO_PORT2_MII_PAGE 0x12 /* Port 2 MII Registers */ +#define ROBO_PORT3_MII_PAGE 0x13 /* Port 3 MII Registers */ +#define ROBO_PORT4_MII_PAGE 0x14 /* Port 4 MII Registers */ +/* (start) registers only for BCM5380 */ +#define ROBO_PORT5_MII_PAGE 0x15 /* Port 5 MII Registers */ +#define ROBO_PORT6_MII_PAGE 0x16 /* Port 6 MII Registers */ +#define ROBO_PORT7_MII_PAGE 0x17 /* Port 7 MII Registers */ +/* (end) registers only for BCM5380 */ +#define ROBO_IM_PORT_PAGE 0x18 /* Inverse MII Port (to EMAC) */ +#define ROBO_ALL_PORT_PAGE 0x19 /* All ports MII Registers (broadcast)*/ + +/* MAC Statistics registers */ +#define ROBO_PORT0_MIB_PAGE 0x20 /* Port 0 10/100 MIB Statistics */ +#define ROBO_PORT1_MIB_PAGE 0x21 /* Port 1 10/100 MIB Statistics */ +#define ROBO_PORT2_MIB_PAGE 0x22 /* Port 2 10/100 MIB Statistics */ +#define ROBO_PORT3_MIB_PAGE 0x23 /* Port 3 10/100 MIB Statistics */ +#define ROBO_PORT4_MIB_PAGE 0x24 /* Port 4 10/100 MIB Statistics */ +/* (start) registers only for BCM5380 */ +#define ROBO_PORT5_MIB_PAGE 0x25 /* Port 5 10/100 MIB Statistics */ +#define ROBO_PORT6_MIB_PAGE 0x26 /* Port 6 10/100 MIB Statistics */ +#define ROBO_PORT7_MIB_PAGE 0x27 /* Port 7 10/100 MIB Statistics */ +/* (end) registers only for BCM5380 */ +#define ROBO_IM_PORT_MIB_PAGE 0x28 /* Inverse MII Port MIB Statistics */ + +/* Quality of Service (QoS) Registers */ +#define ROBO_QOS_PAGE 0x30 /* QoS Registers */ + +/* VLAN Registers */ +#define ROBO_VLAN_PAGE 0x34 /* VLAN Registers */ + +/* Note SPI Data/IO Registers not used */ +#define ROBO_SPI_DATA_IO_0_PAGE 0xf0 /* SPI Data I/O 0 */ +#define ROBO_SPI_DATA_IO_1_PAGE 0xf1 /* SPI Data I/O 1 */ +#define ROBO_SPI_DATA_IO_2_PAGE 0xf2 /* SPI Data I/O 2 */ +#define ROBO_SPI_DATA_IO_3_PAGE 0xf3 /* SPI Data I/O 3 */ +#define ROBO_SPI_DATA_IO_4_PAGE 0xf4 /* SPI Data I/O 4 */ +#define ROBO_SPI_DATA_IO_5_PAGE 0xf5 /* SPI Data I/O 5 */ +#define ROBO_SPI_DATA_IO_6_PAGE 0xf6 /* SPI Data I/O 6 */ +#define ROBO_SPI_DATA_IO_7_PAGE 0xf7 /* SPI Data I/O 7 */ + +#define ROBO_SPI_STATUS_PAGE 0xfe /* SPI Status Registers */ +#define ROBO_PAGE_PAGE 0xff /* Page Registers */ + + +/* BCM5325m CONTROL PAGE (0x00) REGISTER MAP : 8bit (byte) registers */ +typedef struct _ROBO_PORT_CTRL_STRUC +{ + unsigned char rx_disable:1; /* rx disable */ + unsigned char tx_disable:1; /* tx disable */ + unsigned char rsvd:3; /* reserved */ + unsigned char stp_state:3; /* spanning tree state */ +} ROBO_PORT_CTRL_STRUC; + +#define ROBO_PORT0_CTRL 0x00 /* 10/100 Port 0 Control */ +#define ROBO_PORT1_CTRL 0x01 /* 10/100 Port 1 Control */ +#define ROBO_PORT2_CTRL 0x02 /* 10/100 Port 2 Control */ +#define ROBO_PORT3_CTRL 0x03 /* 10/100 Port 3 Control */ +#define ROBO_PORT4_CTRL 0x04 /* 10/100 Port 4 Control */ +/* (start) registers only for BCM5380 */ +#define ROBO_PORT5_CTRL 0x05 /* 10/100 Port 5 Control */ +#define ROBO_PORT6_CTRL 0x06 /* 10/100 Port 6 Control */ +#define ROBO_PORT7_CTRL 0x07 /* 10/100 Port 7 Control */ +/* (end) registers only for BCM5380 */ +#define ROBO_IM_PORT_CTRL 0x08 /* 10/100 Port 8 Control */ +#define ROBO_SMP_CTRL 0x0a /* SMP Control register */ +#define ROBO_SWITCH_MODE 0x0b /* Switch Mode Control */ +#define ROBO_PORT_OVERRIDE_CTRL 0x0e /* Port state override */ +#define ROBO_PORT_OVERRIDE_RVMII (1<<4) /* Bit 4 enables RvMII */ +#define ROBO_PD_MODE_CTRL 0x0f /* Power-down mode control */ +#define ROBO_IP_MULTICAST_CTRL 0x21 /* IP Multicast control */ + +/* BCM5325m STATUS PAGE (0x01) REGISTER MAP : 16bit/48bit registers */ +#define ROBO_HALF_DUPLEX 0 +#define ROBO_FULL_DUPLEX 1 + +#define ROBO_LINK_STAT_SUMMARY 0x00 /* Link Status Summary: 16bit */ +#define ROBO_LINK_STAT_CHANGE 0x02 /* Link Status Change: 16bit */ +#define ROBO_SPEED_STAT_SUMMARY 0x04 /* Port Speed Summary: 16bit*/ +#define ROBO_DUPLEX_STAT_SUMMARY 0x06 /* Duplex Status Summary: 16bit */ +#define ROBO_PAUSE_STAT_SUMMARY 0x08 /* PAUSE Status Summary: 16bit */ +#define ROBO_SOURCE_ADDR_CHANGE 0x0C /* Source Address Change: 16bit */ +#define ROBO_LSA_PORT0 0x10 /* Last Source Addr, Port 0: 48bits*/ +#define ROBO_LSA_PORT1 0x16 /* Last Source Addr, Port 1: 48bits*/ +#define ROBO_LSA_PORT2 0x1c /* Last Source Addr, Port 2: 48bits*/ +#define ROBO_LSA_PORT3 0x22 /* Last Source Addr, Port 3: 48bits*/ +#define ROBO_LSA_PORT4 0x28 /* Last Source Addr, Port 4: 48bits*/ +#define ROBO_LSA_IM_PORT 0x40 /* Last Source Addr, IM Port: 48bits*/ + +/* BCM5325m MANAGEMENT MODE REGISTERS (0x02) REGISTER MAP: 8/48 bit regs*/ +typedef struct _ROBO_GLOBAL_CONFIG_STRUC +{ + unsigned char resetMIB:1; /* reset MIB counters */ + unsigned char rxBPDU:1; /* receive BDPU enable */ + unsigned char rsvd1:2; /* reserved */ + unsigned char MIBacHdrCtrl:1; /* MIB autocast header control */ + unsigned char MIBac:1; /* MIB autocast enable */ + unsigned char frameMgmtPort:2; /* frame management port */ +} ROBO_GLOBAL_CONFIG_STRUC; +#define ROBO_GLOBAL_CONFIG 0x00 /* Global Management Config: 8bit*/ +#define ROBO_MGMT_PORT_ID 0x02 /* Management Port ID: 8bit*/ +#define ROBO_RMON_MIB_STEER 0x04 /* RMON Mib Steering: 16bit */ +#define ROBO_MIB_MODE_SELECT 0x04 /* MIB Mode select: 16bit (BCM5350) */ +#define ROBO_AGE_TIMER_CTRL 0x06 /* Age time control: 32bit */ +#define ROBO_MIRROR_CAP_CTRL 0x10 /* Mirror Capture : 16bit */ +#define ROBO_MIRROR_ING_CTRL 0x12 /* Mirror Ingress Control: 16bit */ +#define ROBO_MIRROR_ING_DIV_CTRL 0x14 /* Mirror Ingress Divider: 16bit */ +#define ROBO_MIRROR_ING_MAC_ADDR 0x16 /* Ingress Mirror MAC Addr: 48bit*/ +#define ROBO_MIRROR_EGR_CTRL 0x1c /* Mirror Egress Control: 16bit */ +#define ROBO_MIRROR_EGR_DIV_CTRL 0x1e /* Mirror Egress Divider: 16bit */ +#define ROBO_MIRROR_EGR_MAC_ADDR 0x20 /* Egress Mirror MAC Addr: 48bit*/ + +/* BCM5325m MIB AUTOCAST REGISTERS (0x03) REGISTER MAP: 8/16/48 bit regs */ +#define ROBO_MIB_AC_PORT 0x00 /* MIB Autocast Port: 16bit */ +#define ROBO_MIB_AC_HDR_PTR 0x02 /* MIB Autocast Header pointer:16bit*/ +#define ROBO_MIB_AC_HDR_LEN 0x04 /* MIB Autocast Header Len: 16bit */ +#define ROBO_MIB_AC_DA 0x06 /* MIB Autocast DA: 48bit */ +#define ROBO_MIB_AC_SA 0x0c /* MIB Autocast SA: 48bit */ +#define ROBO_MIB_AC_TYPE 0x12 /* MIB Autocast Type: 16bit */ +#define ROBO_MIB_AC_RATE 0x14 /* MIB Autocast Rate: 8bit */ +#define ROBO_GET_AC_RATE(secs) ((secs)*10) +#define ROBO_AC_RATE_MAX 0xff +#define ROBO_AC_RATE_DEFAULT 0x64 /* 10 secs */ +typedef struct _ROBO_MIB_AC_STRUCT +{ + unsigned char opcode:4; /* Tx MIB Autocast opcode */ + unsigned char portno:4; /* zero-based port no. */ + unsigned char portstate:8; /* port state */ + unsigned long long TxOctets; + unsigned int TxDropPkts; + unsigned int rsvd; + unsigned int TxBroadcastPkts; + unsigned int TxMulticastPkts; + unsigned int TxUnicastPkts; + unsigned int TxCollisions; + unsigned int TxSingleCollision; + unsigned int TxMultiCollision; + unsigned int TxDeferredTransmit; + unsigned int TxLateCollision; + unsigned int TxExcessiveCollision; + unsigned int TxFrameInDiscards; + unsigned int TxPausePkts; + unsigned int rsvd1[2]; + unsigned long long RxOctets; + unsigned int RxUndersizePkts; + unsigned int RxPausePkts; + unsigned int RxPkts64Octets; + unsigned int RxPkts64to127Octets; + unsigned int RxPkts128to255Octets; + unsigned int RxPkts256to511Octets; + unsigned int RxPkts512to1023Octets; + unsigned int RxPkts1024to1522Octets; + unsigned int RxOversizePkts; + unsigned int RxJabbers; + unsigned int RxAlignmentErrors; + unsigned int RxFCSErrors; + unsigned long long RxGoodOctets; + unsigned int RxDropPkts; + unsigned int RxUnicastPkts; + unsigned int RxMulticastPkts; + unsigned int RxBroadcastPkts; + unsigned int RxSAChanges; + unsigned int RxFragments; + unsigned int RxExcessSizeDisc; + unsigned int RxSymbolError; +} ROBO_MIB_AC_STRUCT; + +/* BCM5325m ARL CONTROL REGISTERS (0x04) REGISTER MAP: 8/16/48/64 bit regs */ +#define ROBO_ARL_CONFIG 0x00 /* ARL Global Configuration: 8bit*/ +#define ROBO_BPDU_MC_ADDR_REG 0x04 /* BPDU Multicast Address Reg:64bit*/ +#define ROBO_MULTIPORT_ADDR_1 0x10 /* Multiport Address 1: 48 bits*/ +#define ROBO_MULTIPORT_VECTOR_1 0x16 /* Multiport Vector 1: 16 bits */ +#define ROBO_MULTIPORT_ADDR_2 0x20 /* Multiport Address 2: 48 bits*/ +#define ROBO_MULTIPORT_VECTOR_2 0x26 /* Multiport Vector 2: 16 bits */ +#define ROBO_SECURE_SRC_PORT_MASK 0x30 /* Secure Source Port Mask: 16 bits*/ +#define ROBO_SECURE_DST_PORT_MASK 0x32 /* Secure Dest Port Mask: 16 bits */ + + +/* BCM5325m ARL IO REGISTERS (0x05) REGISTER MAP: 8/16/48/64 bit regs */ +#define ARL_TABLE_WRITE 0 /* for read/write state in control reg */ +#define ARL_TABLE_READ 1 /* for read/write state in control reg */ +#ifdef BCM5380 +#define ARL_VID_BYTES 2 /* number of bytes for VID */ +#else +#define ARL_VID_BYTES 1 /* number of bytes for VID */ +#endif +typedef struct _ROBO_ARL_RW_CTRL_STRUC +{ + unsigned char ARLrw:1; /* ARL read/write (1=read) */ + unsigned char rsvd:6; /* reserved */ + unsigned char ARLStart:1; /* ARL start/done (1=start) */ +} ROBO_ARL_RW_CTRL_STRUC; +typedef struct _ROBO_ARL_SEARCH_CTRL_STRUC +{ + unsigned char valid:1; /* ARL search result valid */ + unsigned char rsvd:6; /* reserved */ + unsigned char ARLStart:1; /* ARL start/done (1=start) */ +} ROBO_ARL_SEARCH_CTRL_STRUC; +typedef struct _ROBO_ARL_ENTRY_CTRL_STRUC +{ + unsigned char portID:4; /* port id */ + unsigned char chipID:2; /* chip id */ + unsigned char rsvd:5; /* reserved */ + unsigned char prio:2; /* priority */ + unsigned char age:1; /* age */ + unsigned char staticEn:1; /* static */ + unsigned char valid:1; /* valid */ +} ROBO_ARL_ENTRY_CTRL_STRUC; +typedef struct _ROBO_ARL_SEARCH_RESULT_CTRL_STRUC +{ + unsigned char portID:4; /* port id */ + unsigned char rsvd:1; /* reserved */ + unsigned char vid:8; /* vlan id */ + unsigned char age:1; /* age */ + unsigned char staticEn:1; /* static */ + unsigned char valid:1; /* valid */ +} ROBO_ARL_SEARCH_RESULT_CTRL_STRUC; +typedef struct _ROBO_ARL_ENTRY_MAC_STRUC +{ + unsigned char macBytes[6]; /* MAC address */ +} ROBO_ARL_ENTRY_MAC_STRUC; + +typedef struct _ROBO_ARL_ENTRY_STRUC +{ + ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */ + ROBO_ARL_ENTRY_CTRL_STRUC ctrl; /* control bits */ +} ROBO_ARL_ENTRY_STRUC; + +typedef struct _ROBO_ARL_SEARCH_RESULT_STRUC +{ + ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */ + ROBO_ARL_SEARCH_RESULT_CTRL_STRUC ctrl; /* control bits */ +} ROBO_ARL_SEARCH_RESULT_STRUC; + +/* multicast versions of ARL entry structs */ +typedef struct _ROBO_ARL_ENTRY_MCAST_CTRL_STRUC +{ + unsigned int portMask:12;/* multicast port mask */ + unsigned char prio:1; /* priority */ + unsigned char gigPort:1; /* gigabit port 1 mask */ + unsigned char staticEn:1; /* static */ + unsigned char valid:1; /* valid */ +} ROBO_ARL_ENTRY_MCAST_CTRL_STRUC; +typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC +{ + unsigned int portMask:13; /* multicast port mask */ + unsigned char age:1; /* age */ + unsigned char staticEn:1; /* static */ + unsigned char valid:1; /* valid */ +} ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC; +/* BCM5350 extension register */ +typedef struct _ROBO_ARL_SEARCH_RESULT_EXTENSION +{ + unsigned int prio:2; /* priority */ + unsigned int portMask:1; /* MSB (MII) of port mask for multicast */ + unsigned int reserved:5; +} ROBO_ARL_SEARCH_RESULT_EXTENSION; + +typedef struct _ROBO_ARL_ENTRY_MCAST_STRUC +{ + ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */ + ROBO_ARL_ENTRY_MCAST_CTRL_STRUC ctrl; /* control bits */ +} ROBO_ARL_ENTRY_MCAST_STRUC; +typedef struct _ROBO_ARL_SEARCH_RESULT_MCAST_STRUC +{ + ROBO_ARL_ENTRY_MAC_STRUC mac; /* MAC address */ + ROBO_ARL_SEARCH_RESULT_MCAST_CTRL_STRUC ctrl; /* control bits */ +} ROBO_ARL_SEARCH_RESULT_MCAST_STRUC; + +#define ROBO_ARL_RW_CTRL 0x00 /* ARL Read/Write Control : 8bit */ +#define ROBO_ARL_MAC_ADDR_IDX 0x02 /* MAC Address Index: 48bit */ +#define ROBO_ARL_VID_TABLE_IDX 0x08 /* VID Table Address Index: 8bit */ +#define ROBO_ARL_ENTRY0 0x10 /* ARL Entry 0 : 64 bit */ +#define ROBO_ARL_ENTRY1 0x18 /* ARL Entry 1 : 64 bit */ +#define ROBO_ARL_SEARCH_CTRL 0x20 /* ARL Search Control: 8bit */ +#define ROBO_ARL_SEARCH_ADDR 0x22 /* ARL Search Address: 16bit */ +#define ROBO_ARL_SEARCH_RESULT 0x24 /* ARL Search Result: 64bit */ +#define ROBO_ARL_SEARCH_RESULT_EXT 0x2c /* ARL Search Result Extension (5350): 8bit */ +#define ROBO_ARL_VID_ENTRY0 0x30 /* ARL VID Entry 0: 64bit */ +#define ROBO_ARL_VID_ENTRY1 0x32 /* ARL VID Entry 1: 64bit */ + +/* BCM5325m MANAGEMENT FRAME REGISTERS (0x6) REGISTER MAP: 8/16 bit regs */ +#define ROBO_MGMT_FRAME_RD_DATA 0x00 /* Management Frame Read Data :8bit*/ +#define ROBO_MGMT_FRAME_WR_DATA 0x01 /* Management Frame Write Data:8bit*/ +#define ROBO_MGMT_FRAME_WR_CTRL 0x02 /* Write Control: 16bit */ +#define ROBO_MGMT_FRAME_RD_STAT 0x04 /* Read Status: 16bit */ + +/* BCM5325m MEMORY ACCESS REGISTERS (Page 0x08) REGISTER MAP: 32 bit regs */ +#define MEM_TABLE_READ 1 /* for read/write state in mem access reg */ +#define MEM_TABLE_WRITE 0 /* for read/write state in mem access reg */ +#define MEM_TABLE_ACCESS_START 1 /* for mem access read/write start */ +#define MEM_TABLE_ACCESS_DONE 0 /* for mem access read/write done */ +#define VLAN_TABLE_ADDR 0x3800 /* BCM5380 only */ +#ifdef BCM5380 +#define NUM_ARL_TABLE_ENTRIES 4096 /* number of entries in ARL table */ +#define NUM_VLAN_TABLE_ENTRIES 2048 /* number of entries in VLAN table */ +#define ARL_TABLE_ADDR 0 /* offset of ARL table start */ +#else +#define NUM_ARL_TABLE_ENTRIES 2048 /* number of entries in ARL table */ +#define NUM_VLAN_TABLE_ENTRIES 256 /* number of entries in VLAN table */ +#define ARL_TABLE_ADDR 0x3800 /* offset of ARL table start */ +/* corresponding values for 5350 */ +#define NUM_ARL_TABLE_ENTRIES_5350 1024 /* number of entries in ARL table (5350) */ +#define NUM_VLAN_TABLE_ENTRIES_5350 16 /* number of entries in VLAN table */ +#define ARL_TABLE_ADDR_5350 0x1c00 /* offset of ARL table start (5350) */ +#endif +typedef struct _ROBO_MEM_ACCESS_CTRL_STRUC +{ + unsigned int memAddr:14; /* 64-bit memory address */ + unsigned char rsvd:4; /* reserved */ + unsigned char readEn:1; /* read enable (0 == write) */ + unsigned char startDone:1;/* memory access start/done */ + unsigned int rsvd1:12; /* reserved */ +} ROBO_MEM_ACCESS_CTRL_STRUC; +typedef struct _ROBO_MEM_ACCESS_DATA_STRUC +{ + unsigned int memData[2]; /* 64-bit data */ + unsigned short rsvd; /* reserved */ +} ROBO_MEM_ACCESS_DATA_STRUC; + +#ifdef BCM5380 +typedef struct _ROBO_ARL_TABLE_DATA_STRUC +{ + unsigned char MACaddr[6]; /* MAC addr */ + unsigned int portID:4; /* port ID */ + unsigned int chipID:2; /* chip ID */ + unsigned int rsvd:6; /* reserved */ + unsigned int highPrio:1; /* high priority address */ + unsigned int age:1; /* entry accessed/learned since ageing process */ + unsigned int staticAddr:1;/* entry is static */ + unsigned int valid:1; /* entry is valid */ + unsigned int vid:12; /* vlan id */ + unsigned int rsvd2:4; /* reserved */ +} ROBO_ARL_TABLE_DATA_STRUC; +#else +typedef struct _ROBO_ARL_TABLE_DATA_STRUC +{ + unsigned char MACaddr[6]; /* MAC addr */ + unsigned int portID:4; /* port ID */ + unsigned int chipID:2; /* chip ID */ + unsigned int rsvd:7; /* reserved */ + unsigned int age:1; /* entry accessed/learned since ageing process */ + unsigned int staticAddr:1;/* entry is static */ + unsigned int valid:1; /* entry is valid */ +} ROBO_ARL_TABLE_DATA_STRUC; +#endif + +/* multicast format*/ +typedef struct _ROBO_ARL_TABLE_MCAST_DATA_STRUC +{ + unsigned char MACaddr[6]; /* MAC addr */ + unsigned int portMask:12;/* multicast port mask */ + unsigned char prio:1; /* priority */ + unsigned char gigPort:1; /* gigabit port 1 mask */ + unsigned char staticEn:1; /* static */ + unsigned char valid:1; /* valid */ + unsigned int vid:12; /* vlan id */ + unsigned int rsvd2:4; /* reserved */ +} ROBO_ARL_TABLE_MCAST_DATA_STRUC; +#define ROBO_MEM_ACCESS_CTRL 0x00 /* Memory Read/Write Control :32bit*/ +#define ROBO_MEM_ACCESS_DATA 0x04 /* Memory Read/Write Data:64bit*/ + +/* BCM5325m SWITCH PORT (0x10-18) REGISTER MAP: 8/16 bit regs */ +typedef struct _ROBO_MII_CTRL_STRUC +{ + unsigned char rsvd:8; /* reserved */ + unsigned char duplex:1; /* duplex mode */ + unsigned char restartAN:1;/* restart auto-negotiation */ + unsigned char rsvd1:1; /* reserved */ + unsigned char powerDown:1;/* power down */ + unsigned char ANenable:1; /* auto-negotiation enable */ + unsigned char speed:1; /* forced speed selection */ + unsigned char loopback:1; /* loopback */ + unsigned char reset:1; /* reset */ +} ROBO_MII_CTRL_STRUC; +typedef struct _ROBO_MII_AN_ADVERT_STRUC +{ + unsigned char selector:5; /* advertise selector field */ + unsigned char T10BaseT:1; /* advertise 10BaseT */ + unsigned char T10BaseTFull:1; /* advertise 10BaseT, full duplex */ + unsigned char T100BaseX:1; /* advertise 100BaseX */ + unsigned char T100BaseXFull:1;/* advertise 100BaseX full duplex */ + unsigned char noT4:1; /* do not advertise T4 */ + unsigned char pause:1; /* advertise pause for full duplex */ + unsigned char rsvd:2; /* reserved */ + unsigned char remoteFault:1; /* transmit remote fault */ + unsigned char rsvd1:1; /* reserved */ + unsigned char nextPage:1; /* nex page operation supported */ +} ROBO_MII_AN_ADVERT_STRUC; +#define ROBO_MII_CTRL 0x00 /* Port MII Control */ +#define ROBO_MII_STAT 0x02 /* Port MII Status */ +/* Fields of link status register */ +#define ROBO_MII_STAT_JABBER (1<<1) /* Jabber detected */ +#define ROBO_MII_STAT_LINK (1<<2) /* Link status */ + +#define ROBO_MII_PHYID_HI 0x04 /* Port PHY ID High */ +#define ROBO_MII_PHYID_LO 0x06 /* Port PHY ID Low */ +#define ROBO_MII_ANA_REG 0x08 /* MII Auto-Neg Advertisement */ +#define ROBO_MII_ANP_REG 0x0a /* MII Auto-Neg Partner Ability */ +#define ROBO_MII_AN_EXP_REG 0x0c /* MII Auto-Neg Expansion */ +#define ROBO_MII_AN_NP_REG 0x0e /* MII next page */ +#define ROBO_MII_ANP_NP_REG 0x10 /* MII Partner next page */ +#define ROBO_MII_100BX_AUX_CTRL 0x20 /* 100BASE-X Auxiliary Control */ +#define ROBO_MII_100BX_AUX_STAT 0x22 /* 100BASE-X Auxiliary Status */ +#define ROBO_MII_100BX_RCV_ERR_CTR 0x24 /* 100BASE-X Receive Error Ctr */ +#define ROBO_MII_100BX_RCV_FS_ERR 0x26 /* 100BASE-X Rcv False Sense Ctr */ +#define ROBO_MII_AUX_CTRL 0x30 /* Auxiliary Control/Status */ +/* Fields of Auxiliary control register */ +#define ROBO_MII_AUX_CTRL_FD (1<<0) /* Full duplex link detected*/ +#define ROBO_MII_AUX_CTRL_SP100 (1<<1) /* Speed 100 indication */ +#define ROBO_MII_AUX_STATUS 0x32 /* Aux Status Summary */ +#define ROBO_MII_CONN_STATUS 0x34 /* Aux Connection Status */ +#define ROBO_MII_AUX_MODE2 0x36 /* Aux Mode 2 */ +#define ROBO_MII_AUX_ERR_STATUS 0x38 /* Aux Error and General Status */ +#define ROBO_MII_AUX_MULTI_PHY 0x3c /* Aux Multiple PHY Register*/ +#define ROBO_MII_BROADCOM_TEST 0x3e /* Broadcom Test Register */ + + +/* BCM5325m PORT MIB REGISTERS (Pages 0x20-0x24,0x28) REGISTER MAP: 64/32 */ +/* Tranmit Statistics */ +#define ROBO_MIB_TX_OCTETS 0x00 /* 64b: TxOctets */ +#define ROBO_MIB_TX_DROP_PKTS 0x08 /* 32b: TxDropPkts */ +#define ROBO_MIB_TX_BC_PKTS 0x10 /* 32b: TxBroadcastPkts */ +#define ROBO_MIB_TX_MC_PKTS 0x14 /* 32b: TxMulticastPkts */ +#define ROBO_MIB_TX_UC_PKTS 0x18 /* 32b: TxUnicastPkts */ +#define ROBO_MIB_TX_COLLISIONS 0x1c /* 32b: TxCollisions */ +#define ROBO_MIB_TX_SINGLE_COLLISIONS 0x20 /* 32b: TxSingleCollision */ +#define ROBO_MIB_TX_MULTI_COLLISIONS 0x24 /* 32b: TxMultiCollision */ +#define ROBO_MIB_TX_DEFER_TX 0x28 /* 32b: TxDeferred Transmit */ +#define ROBO_MIB_TX_LATE_COLLISIONS 0x2c /* 32b: TxLateCollision */ +#define ROBO_MIB_EXCESS_COLLISIONS 0x30 /* 32b: TxExcessiveCollision*/ +#define ROBO_MIB_FRAME_IN_DISCARDS 0x34 /* 32b: TxFrameInDiscards */ +#define ROBO_MIB_TX_PAUSE_PKTS 0x38 /* 32b: TxPausePkts */ + +/* Receive Statistics */ +#define ROBO_MIB_RX_OCTETS 0x44 /* 64b: RxOctets */ +#define ROBO_MIB_RX_UNDER_SIZE_PKTS 0x4c /* 32b: RxUndersizePkts(runts)*/ +#define ROBO_MIB_RX_PAUSE_PKTS 0x50 /* 32b: RxPausePkts */ +#define ROBO_MIB_RX_PKTS_64 0x54 /* 32b: RxPkts64Octets */ +#define ROBO_MIB_RX_PKTS_65_TO_127 0x58 /* 32b: RxPkts64to127Octets*/ +#define ROBO_MIB_RX_PKTS_128_TO_255 0x5c /* 32b: RxPkts128to255Octets*/ +#define ROBO_MIB_RX_PKTS_256_TO_511 0x60 /* 32b: RxPkts256to511Octets*/ +#define ROBO_MIB_RX_PKTS_512_TO_1023 0x64 /* 32b: RxPkts512to1023Octets*/ +#define ROBO_MIB_RX_PKTS_1024_TO_1522 0x68 /* 32b: RxPkts1024to1522Octets*/ +#define ROBO_MIB_RX_OVER_SIZE_PKTS 0x6c /* 32b: RxOversizePkts*/ +#define ROBO_MIB_RX_JABBERS 0x70 /* 32b: RxJabbers*/ +#define ROBO_MIB_RX_ALIGNMENT_ERRORS 0x74 /* 32b: RxAlignmentErrors*/ +#define ROBO_MIB_RX_FCS_ERRORS 0x78 /* 32b: RxFCSErrors */ +#define ROBO_MIB_RX_GOOD_OCTETS 0x7c /* 32b: RxGoodOctets */ +#define ROBO_MIB_RX_DROP_PKTS 0x84 /* 32b: RxDropPkts */ +#define ROBO_MIB_RX_UC_PKTS 0x88 /* 32b: RxUnicastPkts */ +#define ROBO_MIB_RX_MC_PKTS 0x8c /* 32b: RxMulticastPkts */ +#define ROBO_MIB_RX_BC_PKTS 0x90 /* 32b: RxBroadcastPkts */ +#define ROBO_MIB_RX_SA_CHANGES 0x94 /* 32b: RxSAChanges */ +#define ROBO_MIB_RX_FRAGMENTS 0x98 /* 32b: RxFragments */ +#define ROBO_MIB_RX_EXCESS_SZ_DISC 0x9c /* 32b: RxExcessSizeDisc*/ +#define ROBO_MIB_RX_SYMBOL_ERROR 0xa0 /* 32b: RxSymbolError */ + +/* BCM5350 MIB Statistics */ +/* Group 0 */ +#define ROBO_MIB_TX_GOOD_PKTS 0x00 /* 16b: TxGoodPkts */ +#define ROBO_MIB_TX_UNICAST_PKTS 0x02 /* 16b: TxUnicastPkts */ +#define ROBO_MIB_RX_GOOD_PKTS 0x04 /* 16b: RxGoodPkts */ +#define ROBO_MIB_RX_GOOD_UNICAST_PKTS 0x06 /* 16b: RxGoodUnicastPkts */ +/* Group 1 */ +#define ROBO_MIB_TX_COLLISION 0x00 /* 16b: TxCollision */ +#define ROBO_MIB_TX_OCTETS_5350 0x02 /* 16b: TxOctets */ +#define ROBO_MIB_RX_FCS_ERRORS_5350 0x04 /* 16b: RxFCSErrors */ +#define ROBO_MIB_RX_GOOD_OCTETS_5350 0x06 /* 16b: RxGoodOctets */ + +/* BCM5325m QoS REGISTERS (Page 0x30) REGISTER MAP: 8/16 */ +#define ROBO_QOS_CTRL 0x00 /* 16b: QoS Control Register */ +#define ROBO_QOS_LOCAL_WEIGHT_CTRL 0x10 /* 8b: Local HQ/LQ Weight Register*/ +#define ROBO_QOS_CPU_WEIGHT_CTRL 0x12 /* 8b: CPU HQ/LQ Weight Register*/ +#define ROBO_QOS_PAUSE_ENA 0x13 /* 16b: Qos Pause Enable Register*/ +#define ROBO_QOS_PRIO_THRESHOLD 0x15 /* 8b: Priority Threshold Register*/ +#define ROBO_QOS_RESERVED 0x16 /* 8b: Qos Reserved Register */ + +/* BCM5325m VLAN REGISTERS (Page 0x34) REGISTER MAP: 8/16bit */ +typedef struct _ROBO_VLAN_CTRL0_STRUC +{ + unsigned char frameControlP:2; /* 802.1P frame control */ + unsigned char frameControlQ:2; /* 802.1Q frame control */ + unsigned char dropMissedVID:1; /* enable drop missed VID packet */ + unsigned char vidMacHash:1; /* VID_MAC hash enable */ + unsigned char vidMacCheck:1; /* VID_MAC check enable */ + unsigned char VLANen:1; /* 802.1Q VLAN enable */ +} ROBO_VLAN_CTRL0_STRUC; +#define VLAN_TABLE_WRITE 1 /* for read/write state in table access reg */ +#define VLAN_TABLE_READ 0 /* for read/write state in table access reg */ +#define VLAN_ID_HIGH_BITS 0 /* static high bits in table access reg */ +#define VLAN_ID_MAX 255 /* max VLAN id */ +#define VLAN_ID_MAX5350 15 /* max VLAN id (5350) */ +#define VLAN_ID_MASK VLAN_ID_MAX /* VLAN id mask */ +#ifdef BCM5380 +#define VLAN_UNTAG_SHIFT 13 /* for postioning untag bits in write reg */ +#define VLAN_VALID 0x4000000 /* valid bit in write reg */ +#else +#define VLAN_UNTAG_SHIFT 7 /* for postioning untag bits in write reg */ +#define VLAN_VALID 0x4000 /* valid bit in write reg */ +/* corresponding values for 5350 */ +#define VLAN_UNTAG_SHIFT_5350 6 /* for postioning untag bits in write reg */ +#define VLAN_VALID_5350 0x00100000 /* valid bit in write reg */ +#endif +typedef struct _ROBO_VLAN_TABLE_ACCESS_STRUC +{ + unsigned char VLANid:8; /* VLAN ID (low 8 bits) */ + unsigned char VLANidHi:4; /* VLAN ID (fixed upper portion) */ + unsigned char readWriteState:1; /* read/write state (write = 1) */ + volatile unsigned char readWriteEnable:1; /* table read/write enable */ + unsigned char rsvd:2; /* reserved */ +} ROBO_VLAN_TABLE_ACCESS_STRUC; +#ifdef BCM5380 +typedef struct _ROBO_VLAN_READ_WRITE_STRUC +{ + unsigned int VLANgroup:13;/* VLAN group mask */ + unsigned int VLANuntag:13;/* VLAN untag enable mask */ + unsigned char valid:1; /* valid */ + unsigned char rsvd:5; /* reserved */ +} ROBO_VLAN_READ_WRITE_STRUC; +#else +typedef struct _ROBO_VLAN_READ_WRITE_STRUC +{ + unsigned char VLANgroup:7; /* VLAN group mask */ + unsigned char VLANuntag:7; /* VLAN untag enable mask */ + unsigned char valid:1; /* valid */ + unsigned char rsvd:1; /* reserved */ +} ROBO_VLAN_READ_WRITE_STRUC; +typedef struct _ROBO_VLAN_READ_WRITE_STRUC_5350 +{ + unsigned char VLANgroup:6; /* VLAN group mask */ + unsigned char VLANuntag:6; /* VLAN untag enable mask */ + unsigned char highVID:8; /* upper bits of vid */ + unsigned char valid:1; /* valid */ + unsigned int rsvd:11; /* reserved */ +} ROBO_VLAN_READ_WRITE_STRUC_5350; +#endif +#define ROBO_VLAN_CTRL0 0x00 /* 8b: VLAN Control 0 Register */ +#define ROBO_VLAN_CTRL1 0x01 /* 8b: VLAN Control 1 Register */ +#define ROBO_VLAN_CTRL2 0x02 /* 8b: VLAN Control 2 Register */ +#define ROBO_VLAN_CTRL3 0x03 /* 8b: VLAN Control 3 Register */ +#define ROBO_VLAN_CTRL4 0x04 /* 8b: VLAN Control 4 Register */ +#define ROBO_VLAN_CTRL5 0x05 /* 8b: VLAN Control 5 Register */ +#define ROBO_VLAN_TABLE_ACCESS 0x08 /* 14b: VLAN Table Access Register */ +#define ROBO_VLAN_TABLE_ACCESS_5350 0x06 /* 14b: VLAN Table Access Register (5350) */ +#define ROBO_VLAN_WRITE 0x0a /* 15b: VLAN Write Register */ +#define ROBO_VLAN_WRITE_5350 0x08 /* 15b: VLAN Write Register (5350) */ +#define ROBO_VLAN_READ 0x0c /* 15b: VLAN Read Register */ +#define ROBO_VLAN_PORT0_DEF_TAG 0x10 /* 16b: VLAN Port 0 Default Tag Register */ +#define ROBO_VLAN_PORT1_DEF_TAG 0x12 /* 16b: VLAN Port 1 Default Tag Register */ +#define ROBO_VLAN_PORT2_DEF_TAG 0x14 /* 16b: VLAN Port 2 Default Tag Register */ +#define ROBO_VLAN_PORT3_DEF_TAG 0x16 /* 16b: VLAN Port 3 Default Tag Register */ +#define ROBO_VLAN_PORT4_DEF_TAG 0x18 /* 16b: VLAN Port 4 Default Tag Register */ +#define ROBO_VLAN_PORTMII_DEF_TAG 0x1a /* 16b: VLAN Port MII Default Tag Register */ +/* 5380 only */ +#define ROBO_VLAN_PORT5_DEF_TAG 0x1a /* 16b: VLAN Port 5 Default Tag Register */ +#define ROBO_VLAN_PORT6_DEF_TAG 0x1c /* 16b: VLAN Port 6 Default Tag Register */ +#define ROBO_VLAN_PORT7_DEF_TAG 0x1e /* 16b: VLAN Port 7 Default Tag Register */ + +/* obsolete */ +#define ROBO_VLAN_PORT0_CTRL 0x00 /* 16b: Port 0 VLAN Register */ +#define ROBO_VLAN_PORT1_CTRL 0x02 /* 16b: Port 1 VLAN Register */ +#define ROBO_VLAN_PORT2_CTRL 0x04 /* 16b: Port 2 VLAN Register */ +#define ROBO_VLAN_PORT3_CTRL 0x06 /* 16b: Port 3 VLAN Register */ +#define ROBO_VLAN_PORT4_CTRL 0x08 /* 16b: Port 4 VLAN Register */ +#define ROBO_VLAN_IM_PORT_CTRL 0x10 /* 16b: Inverse MII Port VLAN Reg */ +#define ROBO_VLAN_SMP_PORT_CTRL 0x12 /* 16b: Serial Port VLAN Register */ +#define ROBO_VLAN_PORTSPI_DEF_TAG 0x1c /* 16b: VLAN Port SPI Default Tag Register */ +#define ROBO_VLAN_PRIORITY_REMAP 0x20 /* 24b: VLAN Priority Re-Map Register */ + +#ifndef _CFE_ +#pragma pack() +#endif + + +#endif /* !__BCM535M_H_ */ + + + + + diff --git a/package/system/utils/robocfg/src/robocfg.c b/package/system/utils/robocfg/src/robocfg.c new file mode 100644 index 000000000..7a4094dd4 --- /dev/null +++ b/package/system/utils/robocfg/src/robocfg.c @@ -0,0 +1,581 @@ +/* + * Broadcom BCM5325E/536x switch configuration utility + * + * Copyright (C) 2005 Oleg I. Vdovikin + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <errno.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/param.h> +#include <sys/ioctl.h> +#include <sys/socket.h> + +/* linux stuff */ +typedef u_int64_t u64; +typedef u_int32_t u32; +typedef u_int16_t u16; +typedef u_int8_t u8; + +#include <linux/if.h> +#include <linux/sockios.h> +#include <linux/ethtool.h> +#include <linux/mii.h> + +#include "etc53xx.h" +#define ROBO_PHY_ADDR 0x1E /* robo switch phy address */ + +/* MII registers */ +#define REG_MII_PAGE 0x10 /* MII Page register */ +#define REG_MII_ADDR 0x11 /* MII Address register */ +#define REG_MII_DATA0 0x18 /* MII Data register 0 */ + +#define REG_MII_PAGE_ENABLE 1 +#define REG_MII_ADDR_WRITE 1 +#define REG_MII_ADDR_READ 2 + +/* Private et.o ioctls */ +#define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9) +#define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10) + +typedef struct { + struct ifreq ifr; + int fd; + int et; /* use private ioctls */ +} robo_t; + +static u16 mdio_read(robo_t *robo, u16 phy_id, u8 reg) +{ + if (robo->et) { + int args[2] = { reg }; + + if (phy_id != ROBO_PHY_ADDR) { + fprintf(stderr, + "Access to real 'phy' registers unavaliable.\n" + "Upgrade kernel driver.\n"); + + return 0xffff; + } + + robo->ifr.ifr_data = (caddr_t) args; + if (ioctl(robo->fd, SIOCGETCPHYRD, (caddr_t)&robo->ifr) < 0) { + perror("SIOCGETCPHYRD"); + exit(1); + } + + return args[1]; + } else { + struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&robo->ifr.ifr_data; + mii->phy_id = phy_id; + mii->reg_num = reg; + if (ioctl(robo->fd, SIOCGMIIREG, &robo->ifr) < 0) { + perror("SIOCGMIIREG"); + exit(1); + } + return mii->val_out; + } +} + +static void mdio_write(robo_t *robo, u16 phy_id, u8 reg, u16 val) +{ + if (robo->et) { + int args[2] = { reg, val }; + + if (phy_id != ROBO_PHY_ADDR) { + fprintf(stderr, + "Access to real 'phy' registers unavaliable.\n" + "Upgrade kernel driver.\n"); + return; + } + + robo->ifr.ifr_data = (caddr_t) args; + if (ioctl(robo->fd, SIOCSETCPHYWR, (caddr_t)&robo->ifr) < 0) { + perror("SIOCGETCPHYWR"); + exit(1); + } + } else { + struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&robo->ifr.ifr_data; + mii->phy_id = phy_id; + mii->reg_num = reg; + mii->val_in = val; + if (ioctl(robo->fd, SIOCSMIIREG, &robo->ifr) < 0) { + perror("SIOCSMIIREG"); + exit(1); + } + } +} + +static int robo_reg(robo_t *robo, u8 page, u8 reg, u8 op) +{ + int i = 3; + + /* set page number */ + mdio_write(robo, ROBO_PHY_ADDR, REG_MII_PAGE, + (page << 8) | REG_MII_PAGE_ENABLE); + + /* set register address */ + mdio_write(robo, ROBO_PHY_ADDR, REG_MII_ADDR, + (reg << 8) | op); + + /* check if operation completed */ + while (i--) { + if ((mdio_read(robo, ROBO_PHY_ADDR, REG_MII_ADDR) & 3) == 0) + return 0; + } + + fprintf(stderr, "robo_reg: timeout\n"); + exit(1); + + return 0; +} + +static void robo_read(robo_t *robo, u8 page, u8 reg, u16 *val, int count) +{ + int i; + + robo_reg(robo, page, reg, REG_MII_ADDR_READ); + + for (i = 0; i < count; i++) + val[i] = mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0 + i); +} + +static u16 robo_read16(robo_t *robo, u8 page, u8 reg) +{ + robo_reg(robo, page, reg, REG_MII_ADDR_READ); + + return mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0); +} + +static u32 robo_read32(robo_t *robo, u8 page, u8 reg) +{ + robo_reg(robo, page, reg, REG_MII_ADDR_READ); + + return mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0) + + (mdio_read(robo, ROBO_PHY_ADDR, REG_MII_DATA0 + 1) << 16); +} + +static void robo_write16(robo_t *robo, u8 page, u8 reg, u16 val16) +{ + /* write data */ + mdio_write(robo, ROBO_PHY_ADDR, REG_MII_DATA0, val16); + + robo_reg(robo, page, reg, REG_MII_ADDR_WRITE); +} + +static void robo_write32(robo_t *robo, u8 page, u8 reg, u32 val32) +{ + /* write data */ + mdio_write(robo, ROBO_PHY_ADDR, REG_MII_DATA0, val32 & 65535); + mdio_write(robo, ROBO_PHY_ADDR, REG_MII_DATA0 + 1, val32 >> 16); + + robo_reg(robo, page, reg, REG_MII_ADDR_WRITE); +} + +/* checks that attached switch is 5325E/5350 */ +static int robo_vlan5350(robo_t *robo) +{ + /* set vlan access id to 15 and read it back */ + u16 val16 = 15; + robo_write16(robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16); + + /* 5365 will refuse this as it does not have this reg */ + return (robo_read16(robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350) == val16); +} + +u8 port[6] = { 0, 1, 2, 3, 4, 8 }; +char ports[6] = { 'W', '4', '3', '2', '1', 'C' }; +char *rxtx[4] = { "enabled", "rx_disabled", "tx_disabled", "disabled" }; +char *stp[8] = { "none", "disable", "block", "listen", "learn", "forward", "6", "7" }; + +struct { + char *name; + u16 bmcr; +} media[5] = { { "auto", BMCR_ANENABLE | BMCR_ANRESTART }, + { "10HD", 0 }, { "10FD", BMCR_FULLDPLX }, + { "100HD", BMCR_SPEED100 }, { "100FD", BMCR_SPEED100 | BMCR_FULLDPLX } }; + +struct { + char *name; + u16 value; +} mdix[3] = { { "auto", 0x0000 }, { "on", 0x1800 }, { "off", 0x0800 } }; + +void usage() +{ + fprintf(stderr, "Broadcom BCM5325E/536x switch configuration utility\n" + "Copyright (C) 2005 Oleg I. Vdovikin\n\n" + "This program is distributed in the hope that it will be useful,\n" + "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" + "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" + "GNU General Public License for more details.\n\n"); + + fprintf(stderr, "Usage: robocfg <op> ... <op>\n" + "Operations are as below:\n" + "\tshow\n" + "\tswitch <enable|disable>\n" + "\tport <port_number> [state <%s|%s|%s|%s>]\n\t\t[stp %s|%s|%s|%s|%s|%s] [tag <vlan_tag>]\n" + "\t\t[media %s|%s|%s|%s|%s] [mdi-x %s|%s|%s]\n" + "\tvlan <vlan_number> [ports <ports_list>]\n" + "\tvlans <enable|disable|reset>\n\n" + "\tports_list should be one argument, space separated, quoted if needed,\n" + "\tport number could be followed by 't' to leave packet vlan tagged (CPU \n" + "\tport default) or by 'u' to untag packet (other ports default) before \n" + "\tbringing it to the port, '*' is ignored\n" + "\nSamples:\n" + "1) ASUS WL-500g Deluxe stock config (eth0 is WAN, eth0.1 is LAN):\n" + "robocfg switch disable vlans enable reset vlan 0 ports \"0 5u\" vlan 1 ports \"1 2 3 4 5t\"" + " port 0 state enabled stp none switch enable\n" + "2) WRT54g, WL-500g Deluxe OpenWRT config (vlan0 is LAN, vlan1 is WAN):\n" + "robocfg switch disable vlans enable reset vlan 0 ports \"1 2 3 4 5t\" vlan 1 ports \"0 5t\"" + " port 0 state enabled stp none switch enable\n", + rxtx[0], rxtx[1], rxtx[2], rxtx[3], stp[0], stp[1], stp[2], stp[3], stp[4], stp[5], + media[0].name, media[1].name, media[2].name, media[3].name, media[4].name, + mdix[0].name, mdix[1].name, mdix[2].name); +} + +static robo_t robo; +int bcm53xx_probe(const char *dev) +{ + struct ethtool_drvinfo info; + unsigned int phyid; + int ret; + + fprintf(stderr, "probing %s\n", dev); + + strcpy(robo.ifr.ifr_name, dev); + memset(&info, 0, sizeof(info)); + info.cmd = ETHTOOL_GDRVINFO; + robo.ifr.ifr_data = (caddr_t)&info; + ret = ioctl(robo.fd, SIOCETHTOOL, (caddr_t)&robo.ifr); + if (ret < 0) { + perror("SIOCETHTOOL"); + return ret; + } + + if ( strcmp(info.driver, "et0") && + strcmp(info.driver, "b44") && + strcmp(info.driver, "bcm63xx_enet") ) { + fprintf(stderr, "driver not supported %s\n", info.driver); + return -ENOSYS; + } + + /* try access using MII ioctls - get phy address */ + robo.et = 0; + if (ioctl(robo.fd, SIOCGMIIPHY, &robo.ifr) < 0) + robo.et = 1; + + if (robo.et) { + unsigned int args[2] = { 2 }; + + robo.ifr.ifr_data = (caddr_t) args; + ret = ioctl(robo.fd, SIOCGETCPHYRD, (caddr_t)&robo.ifr); + if (ret < 0) { + perror("SIOCGETCPHYRD"); + return ret; + } + phyid = args[1] & 0xffff; + + args[0] = 3; + robo.ifr.ifr_data = (caddr_t) args; + ret = ioctl(robo.fd, SIOCGETCPHYRD, (caddr_t)&robo.ifr); + if (ret < 0) { + perror("SIOCGETCPHYRD"); + return ret; + } + phyid |= args[1] << 16; + } else { + struct mii_ioctl_data *mii = (struct mii_ioctl_data *)&robo.ifr.ifr_data; + mii->phy_id = ROBO_PHY_ADDR; + mii->reg_num = 2; + ret = ioctl(robo.fd, SIOCGMIIREG, &robo.ifr); + if (ret < 0) { + perror("SIOCGMIIREG"); + return ret; + } + phyid = mii->val_out & 0xffff; + + mii->phy_id = ROBO_PHY_ADDR; + mii->reg_num = 3; + ret = ioctl(robo.fd, SIOCGMIIREG, &robo.ifr); + if (ret < 0) { + perror("SIOCGMIIREG"); + return ret; + } + phyid |= mii->val_out << 16; + } + + if (phyid == 0xffffffff || phyid == 0x55210022) { + perror("phyid"); + return -EIO; + } + + return 0; +} + +int +main(int argc, char *argv[]) +{ + u16 val16; + u16 mac[3]; + int i = 0, j; + int robo5350 = 0; + u32 phyid; + + if ((robo.fd = socket(AF_INET, SOCK_DGRAM, 0)) < 0) { + perror("socket"); + exit(1); + } + + if (bcm53xx_probe("eth1")) { + if (bcm53xx_probe("eth0")) { + perror("bcm53xx_probe"); + exit(1); + } + } + + robo5350 = robo_vlan5350(&robo); + + for (i = 1; i < argc;) { + if (strcasecmp(argv[i], "port") == 0 && (i + 1) < argc) + { + int index = atoi(argv[++i]); + /* read port specs */ + while (++i < argc) { + if (strcasecmp(argv[i], "state") == 0 && ++i < argc) { + for (j = 0; j < 4 && strcasecmp(argv[i], rxtx[j]); j++); + if (j < 4) { + /* change state */ + robo_write16(&robo,ROBO_CTRL_PAGE, port[index], + (robo_read16(&robo, ROBO_CTRL_PAGE, port[index]) & ~(3 << 0)) | (j << 0)); + } else { + fprintf(stderr, "Invalid state '%s'.\n", argv[i]); + exit(1); + } + } else + if (strcasecmp(argv[i], "stp") == 0 && ++i < argc) { + for (j = 0; j < 8 && strcasecmp(argv[i], stp[j]); j++); + if (j < 8) { + /* change stp */ + robo_write16(&robo,ROBO_CTRL_PAGE, port[index], + (robo_read16(&robo, ROBO_CTRL_PAGE, port[index]) & ~(7 << 5)) | (j << 5)); + } else { + fprintf(stderr, "Invalid stp '%s'.\n", argv[i]); + exit(1); + } + } else + if (strcasecmp(argv[i], "media") == 0 && ++i < argc) { + for (j = 0; j < 5 && strcasecmp(argv[i], media[j].name); j++); + if (j < 5) { + mdio_write(&robo, port[index], MII_BMCR, media[j].bmcr); + } else { + fprintf(stderr, "Invalid media '%s'.\n", argv[i]); + exit(1); + } + } else + if (strcasecmp(argv[i], "mdi-x") == 0 && ++i < argc) { + for (j = 0; j < 3 && strcasecmp(argv[i], mdix[j].name); j++); + if (j < 3) { + mdio_write(&robo, port[index], 0x1c, mdix[j].value | + (mdio_read(&robo, port[index], 0x1c) & ~0x1800)); + } else { + fprintf(stderr, "Invalid mdi-x '%s'.\n", argv[i]); + exit(1); + } + } else + if (strcasecmp(argv[i], "tag") == 0 && ++i < argc) { + j = atoi(argv[i]); + /* change vlan tag */ + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (index << 1), j); + } else break; + } + } else + if (strcasecmp(argv[i], "vlan") == 0 && (i + 1) < argc) + { + int index = atoi(argv[++i]); + while (++i < argc) { + if (strcasecmp(argv[i], "ports") == 0 && ++i < argc) { + char *ports = argv[i]; + int untag = 0; + int member = 0; + + while (*ports >= '0' && *ports <= '9') { + j = *ports++ - '0'; + member |= 1 << j; + + /* untag if needed, CPU port requires special handling */ + if (*ports == 'u' || (j != 5 && (*ports == ' ' || *ports == 0))) + { + untag |= 1 << j; + if (*ports) ports++; + /* change default vlan tag */ + robo_write16(&robo, ROBO_VLAN_PAGE, + ROBO_VLAN_PORT0_DEF_TAG + (j << 1), index); + } else + if (*ports == '*' || *ports == 't' || *ports == ' ') ports++; + else break; + + while (*ports == ' ') ports++; + } + + if (*ports) { + fprintf(stderr, "Invalid ports '%s'.\n", argv[i]); + exit(1); + } else { + /* write config now */ + val16 = (index) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */; + if (robo5350) { + robo_write32(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, + (1 << 20) /* valid */ | (untag << 6) | member); + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16); + } else { + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, + (1 << 14) /* valid */ | (untag << 7) | member); + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16); + } + } + } else break; + } + } else + if (strcasecmp(argv[i], "switch") == 0 && (i + 1) < argc) + { + /* enable/disable switching */ + robo_write16(&robo, ROBO_CTRL_PAGE, ROBO_SWITCH_MODE, + (robo_read16(&robo, ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & ~2) | + (*argv[++i] == 'e' ? 2 : 0)); + i++; + } else + if (strcasecmp(argv[i], "vlans") == 0 && (i + 1) < argc) + { + while (++i < argc) { + if (strcasecmp(argv[i], "reset") == 0) { + /* reset vlan validity bit */ + for (j = 0; j <= (robo5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); j++) + { + /* write config now */ + val16 = (j) /* vlan */ | (1 << 12) /* write */ | (1 << 13) /* enable */; + if (robo5350) { + robo_write32(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE_5350, 0); + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16); + } else { + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_WRITE, 0); + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16); + } + } + } else + if (strcasecmp(argv[i], "enable") == 0 || strcasecmp(argv[i], "disable") == 0) + { + int disable = (*argv[i] == 'd') || (*argv[i] == 'D'); + /* enable/disable vlans */ + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0, disable ? 0 : + (1 << 7) /* 802.1Q VLAN */ | (3 << 5) /* mac check and hash */); + + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL1, disable ? 0 : + (1 << 1) | (1 << 2) | (1 << 3) /* RSV multicast */); + + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL4, disable ? 0 : + (1 << 6) /* drop invalid VID frames */); + + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL5, disable ? 0 : + (1 << 3) /* drop miss V table frames */); + + } else break; + } + } else + if (strcasecmp(argv[i], "show") == 0) + { + break; + } else { + fprintf(stderr, "Invalid option %s\n", argv[i]); + usage(); + exit(1); + } + } + + if (i == argc) { + if (argc == 1) usage(); + return 0; + } + + /* show config */ + + printf("Switch: %sabled\n", robo_read16(&robo, ROBO_CTRL_PAGE, ROBO_SWITCH_MODE) & 2 ? "en" : "dis"); + + for (i = 0; i < 6; i++) { + printf(robo_read16(&robo, ROBO_STAT_PAGE, ROBO_LINK_STAT_SUMMARY) & (1 << port[i]) ? + "Port %d(%c): %s%s " : "Port %d(%c): DOWN ", i, ports[i], + robo_read16(&robo, ROBO_STAT_PAGE, ROBO_SPEED_STAT_SUMMARY) & (1 << port[i]) ? "100" : " 10", + robo_read16(&robo, ROBO_STAT_PAGE, ROBO_DUPLEX_STAT_SUMMARY) & (1 << port[i]) ? "FD" : "HD"); + + val16 = robo_read16(&robo, ROBO_CTRL_PAGE, port[i]); + + printf("%s stp: %s vlan: %d ", rxtx[val16 & 3], stp[(val16 >> 5) & 7], + robo_read16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_PORT0_DEF_TAG + (i << 1))); + + robo_read(&robo, ROBO_STAT_PAGE, ROBO_LSA_PORT0 + port[i] * 6, mac, 3); + + printf("mac: %02x:%02x:%02x:%02x:%02x:%02x\n", + mac[2] >> 8, mac[2] & 255, mac[1] >> 8, mac[1] & 255, mac[0] >> 8, mac[0] & 255); + } + + val16 = robo_read16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_CTRL0); + + printf("VLANs: %s %sabled%s%s\n", + robo5350 ? "BCM5325/535x" : "BCM536x", + (val16 & (1 << 7)) ? "en" : "dis", + (val16 & (1 << 6)) ? " mac_check" : "", + (val16 & (1 << 5)) ? " mac_hash" : ""); + + /* scan VLANs */ + for (i = 0; i <= (robo5350 ? VLAN_ID_MAX5350 : VLAN_ID_MAX); i++) { + /* issue read */ + val16 = (i) /* vlan */ | (0 << 12) /* read */ | (1 << 13) /* enable */; + + if (robo5350) { + u32 val32; + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS_5350, val16); + /* actual read */ + val32 = robo_read32(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_READ); + if ((val32 & (1 << 20)) /* valid */) { + printf("vlan%d:", i); + for (j = 0; j < 6; j++) { + if (val32 & (1 << j)) { + printf(" %d%s", j, (val32 & (1 << (j + 6))) ? + (j == 5 ? "u" : "") : "t"); + } + } + printf("\n"); + } + } else { + robo_write16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_TABLE_ACCESS, val16); + /* actual read */ + val16 = robo_read16(&robo, ROBO_VLAN_PAGE, ROBO_VLAN_READ); + if ((val16 & (1 << 14)) /* valid */) { + printf("vlan%d:", i); + for (j = 0; j < 6; j++) { + if (val16 & (1 << j)) { + printf(" %d%s", j, (val16 & (1 << (j + 7))) ? + (j == 5 ? "u" : "") : "t"); + } + } + printf("\n"); + } + } + } + + return (0); +} |