diff options
4 files changed, 18 insertions, 62 deletions
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h index 9634322d1..2098c5cc1 100644 --- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h +++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h @@ -13,7 +13,6 @@ enum { RT305X_ESW_VLAN_CONFIG_NONE = 0, - RT305X_ESW_VLAN_CONFIG_BYPASS, RT305X_ESW_VLAN_CONFIG_LLLLW, RT305X_ESW_VLAN_CONFIG_WLLLL, }; diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c index 2e884c39e..07e950ad9 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/devices.c @@ -156,8 +156,15 @@ static struct resource rt305x_esw_resources[] = { }; struct rt305x_esw_platform_data rt305x_esw_data = { + /* All ports are LAN ports. */ .vlan_config = RT305X_ESW_VLAN_CONFIG_NONE, .reg_initval_fct2 = 0x00d6500c, + /* + * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1, + * turbo mii off, rgmi 3.3v off + * port5: disabled + * port6: enabled, gige, full-duplex, rx/tx-flow-control + */ .reg_initval_fpa2 = 0x3f502b28, }; diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c index 8551f2541..8c0caadb1 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-wl351.c @@ -97,9 +97,15 @@ static void __init wl351_init(void) ramips_register_gpio_buttons(-1, WL351_KEYS_POLL_INTERVAL, ARRAY_SIZE(wl351_gpio_buttons), wl351_gpio_buttons); - // external rtl8366rb - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_BYPASS; + /* External RTL8366RB. */ + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; rt305x_esw_data.reg_initval_fct2 = 0x0002500c; + /* + * ext phy base addr 31, rx/tx clock skew 0, + * turbo mii off, rgmi 3.3v off, port 5 polling off + * port5: enabled, gige, full-duplex, rx/tx-flow-control + * port6: enabled, gige, full-duplex, rx/tx-flow-control + */ rt305x_esw_data.reg_initval_fpa2 = 0x1f003fff; rt305x_register_ethernet(); platform_device_register(&wl351_switch); diff --git a/target/linux/ramips/files/drivers/net/ethernet/ramips/ramips_esw.c b/target/linux/ramips/files/drivers/net/ethernet/ramips/ramips_esw.c index 8a70795e7..19fc3b4b2 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ramips/ramips_esw.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ramips/ramips_esw.c @@ -147,7 +147,6 @@ enum { /* Port attributes. */ RT305X_ESW_ATTR_PORT_DISABLE, RT305X_ESW_ATTR_PORT_DOUBLETAG, - RT305X_ESW_ATTR_PORT_EN_VLAN, RT305X_ESW_ATTR_PORT_UNTAG, RT305X_ESW_ATTR_PORT_LED, RT305X_ESW_ATTR_PORT_LAN, @@ -159,7 +158,6 @@ struct rt305x_esw_port { bool disable; bool doubletag; bool untag; - bool en_vlan; u8 led; u16 pvid; }; @@ -335,7 +333,7 @@ static void rt305x_esw_hw_init(struct rt305x_esw *esw) { int i; - u8 port_map = 0; + u8 port_map = RT305X_ESW_PMAP_LLLLLL; /* vodoo from original driver */ rt305x_esw_wr(esw, 0xC8A07850, RT305X_ESW_REG_FCT0); @@ -412,55 +410,16 @@ rt305x_esw_hw_init(struct rt305x_esw *esw) /* select local register */ rt305x_mii_write(esw, 0, 31, 0x8000); - /* Set up logical config and apply. */ - for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) { - esw->vlans[i].vid = RT305X_ESW_VLAN_NONE; - esw->vlans[i].ports = RT305X_ESW_PORTS_NONE; - } - - for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) { - esw->ports[i].pvid = 1; - esw->ports[i].en_vlan = 1; - esw->ports[i].untag = i != RT305X_ESW_PORT6; - } - switch (esw->pdata->vlan_config) { - case RT305X_ESW_VLAN_CONFIG_BYPASS: case RT305X_ESW_VLAN_CONFIG_NONE: port_map = RT305X_ESW_PMAP_LLLLLL; - esw->global_vlan_enable = 0; break; - case RT305X_ESW_VLAN_CONFIG_LLLLW: port_map = RT305X_ESW_PMAP_LLLLWL; - esw->global_vlan_enable = 1; - esw->vlans[0].vid = 1; - esw->vlans[1].vid = 2; - esw->ports[4].pvid = 2; - esw->ports[5].disable = 1; - esw->vlans[0].ports = - BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) | - BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) | - BIT(RT305X_ESW_PORT6); - esw->vlans[1].ports = - BIT(RT305X_ESW_PORT4) | BIT(RT305X_ESW_PORT6); break; - case RT305X_ESW_VLAN_CONFIG_WLLLL: port_map = RT305X_ESW_PMAP_WLLLLL; - esw->global_vlan_enable = 1; - esw->vlans[0].vid = 1; - esw->vlans[1].vid = 2; - esw->ports[0].pvid = 2; - esw->ports[5].disable = 1; - esw->vlans[0].ports = - BIT(RT305X_ESW_PORT1) | BIT(RT305X_ESW_PORT2) | - BIT(RT305X_ESW_PORT3) | BIT(RT305X_ESW_PORT4) | - BIT(RT305X_ESW_PORT6); - esw->vlans[1].ports = - BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT6); break; - default: BUG(); } @@ -475,6 +434,7 @@ rt305x_esw_hw_init(struct rt305x_esw *esw) RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S, port_map << RT305X_ESW_SGC2_LAN_PMAP_S); + /* Apply the empty config. */ rt305x_esw_apply_config(&esw->swdev); } @@ -506,7 +466,7 @@ rt305x_esw_apply_config(struct switch_dev *dev) disable |= esw->ports[i].disable << i; if (esw->global_vlan_enable) { doubletag |= esw->ports[i].doubletag << i; - en_vlan |= esw->ports[i].en_vlan << i; + en_vlan |= 1 << i; untag |= esw->ports[i].untag << i; pvid = esw->ports[i].pvid; } else { @@ -671,10 +631,6 @@ rt305x_esw_get_port_bool(struct switch_dev *dev, reg = RT305X_ESW_REG_SGC2; shift = RT305X_ESW_SGC2_DOUBLE_TAG_S; break; - case RT305X_ESW_ATTR_PORT_EN_VLAN: - reg = RT305X_ESW_REG_PFC1; - shift = RT305X_ESW_PFC1_EN_VLAN_S; - break; case RT305X_ESW_ATTR_PORT_UNTAG: reg = RT305X_ESW_REG_POC3; shift = RT305X_ESW_POC3_UNTAG_EN_S; @@ -714,9 +670,6 @@ rt305x_esw_set_port_bool(struct switch_dev *dev, case RT305X_ESW_ATTR_PORT_DOUBLETAG: esw->ports[idx].doubletag = val->value.i; break; - case RT305X_ESW_ATTR_PORT_EN_VLAN: - esw->ports[idx].en_vlan = val->value.i; - break; case RT305X_ESW_ATTR_PORT_UNTAG: esw->ports[idx].untag = val->value.i; break; @@ -945,15 +898,6 @@ static const struct switch_attr rt305x_esw_port[] = { }, { .type = SWITCH_TYPE_INT, - .name = "en_vlan", - .description = "VLAN enabled (1:enabled)", - .max = 1, - .id = RT305X_ESW_ATTR_PORT_EN_VLAN, - .get = rt305x_esw_get_port_bool, - .set = rt305x_esw_set_port_bool, - }, - { - .type = SWITCH_TYPE_INT, .name = "untag", .description = "Untag (1:strip outgoing vlan tag)", .max = 1, |