diff options
21 files changed, 63 insertions, 63 deletions
diff --git a/target/linux/adm5120/patches-2.6.32/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.32/007-adm5120_pci.patch index 91bd79d76..b06d7947c 100644 --- a/target/linux/adm5120/patches-2.6.32/007-adm5120_pci.patch +++ b/target/linux/adm5120/patches-2.6.32/007-adm5120_pci.patch @@ -10,7 +10,7 @@ obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h -@@ -1748,6 +1748,9 @@ +@@ -1752,6 +1752,9 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 diff --git a/target/linux/adm5120/patches-2.6.32/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.32/009-adm5120_leds_switch_trigger.patch index 272fb8f19..2f6eaf06e 100644 --- a/target/linux/adm5120/patches-2.6.32/009-adm5120_leds_switch_trigger.patch +++ b/target/linux/adm5120/patches-2.6.32/009-adm5120_leds_switch_trigger.patch @@ -1,8 +1,8 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -315,4 +315,12 @@ config LEDS_TRIGGER_NETDEV - This allows LEDs to be controlled by network device activity. - If unsure, say Y. +@@ -322,4 +322,12 @@ config LEDS_TRIGGER_USBDEV + This allows LEDs to be controlled by the presence/activity of + an USB device. If unsure, say N. +config LEDS_TRIGGER_ADM5120_SWITCH + tristate "LED ADM5120 Switch Port Status Trigger" @@ -15,8 +15,8 @@ endif # NEW_LEDS --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -42,3 +42,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o +@@ -43,3 +43,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o - obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o +obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o diff --git a/target/linux/adm5120/patches-2.6.34/001-adm5120.patch b/target/linux/adm5120/patches-2.6.34/001-adm5120.patch index c6eec1e23..c99399cb1 100644 --- a/target/linux/adm5120/patches-2.6.34/001-adm5120.patch +++ b/target/linux/adm5120/patches-2.6.34/001-adm5120.patch @@ -22,7 +22,7 @@ config MACH_ALCHEMY bool "Alchemy processor based machines" select SYS_SUPPORTS_ZBOOT -@@ -681,6 +696,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD +@@ -683,6 +698,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD endchoice @@ -32,7 +32,7 @@ source "arch/mips/jazz/Kconfig" --- a/arch/mips/Makefile +++ b/arch/mips/Makefile -@@ -214,6 +214,23 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre +@@ -227,6 +227,23 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # diff --git a/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch index b06d7947c..12d0f4aa9 100644 --- a/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch +++ b/target/linux/adm5120/patches-2.6.34/007-adm5120_pci.patch @@ -10,7 +10,7 @@ obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h -@@ -1752,6 +1752,9 @@ +@@ -1753,6 +1753,9 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 diff --git a/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch index 0258fa4fb..777476f3e 100644 --- a/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch +++ b/target/linux/adm5120/patches-2.6.34/009-adm5120_leds_switch_trigger.patch @@ -1,8 +1,8 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -365,4 +365,12 @@ config LEDS_TRIGGER_NETDEV - This allows LEDs to be controlled by network device activity. - If unsure, say Y. +@@ -372,4 +372,12 @@ config LEDS_TRIGGER_USBDEV + This allows LEDs to be controlled by the presence/activity of + an USB device. If unsure, say N. +config LEDS_TRIGGER_ADM5120_SWITCH + tristate "LED ADM5120 Switch Port Status Trigger" @@ -15,8 +15,8 @@ endif # NEW_LEDS --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -48,3 +48,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o +@@ -49,3 +49,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o - obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o +obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o diff --git a/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch index 43459328a..5ecf16650 100644 --- a/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch +++ b/target/linux/adm5120/patches-2.6.34/101-cfi_fixup_macronix_bootloc.patch @@ -1,8 +1,8 @@ --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -53,6 +53,12 @@ +@@ -52,6 +52,12 @@ + #define SST49LF008A 0x005a #define AT49BV6416 0x00d6 - #define MANUFACTURER_SAMSUNG 0x00ec +/* Macronix */ +#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */ @@ -13,7 +13,7 @@ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -283,6 +289,41 @@ static void fixup_s29gl032n_sectors(stru +@@ -282,6 +288,41 @@ static void fixup_s29gl032n_sectors(stru } } @@ -55,7 +55,7 @@ static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, #ifdef AMD_BOOTLOC_BUG -@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] = +@@ -318,6 +359,9 @@ static struct cfi_fixup fixup_table[] = */ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, diff --git a/target/linux/adm5120/patches-2.6.34/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.34/103-mtd_trxsplit.patch index 69f103550..ec4f6c5a4 100644 --- a/target/linux/adm5120/patches-2.6.34/103-mtd_trxsplit.patch +++ b/target/linux/adm5120/patches-2.6.34/103-mtd_trxsplit.patch @@ -14,7 +14,7 @@ depends on MTD_PARTITIONS --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile -@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o mtdbdi. +@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o diff --git a/target/linux/adm5120/patches-2.6.35/001-adm5120.patch b/target/linux/adm5120/patches-2.6.35/001-adm5120.patch index c6eec1e23..c99399cb1 100644 --- a/target/linux/adm5120/patches-2.6.35/001-adm5120.patch +++ b/target/linux/adm5120/patches-2.6.35/001-adm5120.patch @@ -22,7 +22,7 @@ config MACH_ALCHEMY bool "Alchemy processor based machines" select SYS_SUPPORTS_ZBOOT -@@ -681,6 +696,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD +@@ -683,6 +698,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD endchoice @@ -32,7 +32,7 @@ source "arch/mips/jazz/Kconfig" --- a/arch/mips/Makefile +++ b/arch/mips/Makefile -@@ -214,6 +214,23 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre +@@ -227,6 +227,23 @@ cflags-$(CONFIG_MACH_JAZZ) += -I$(srctre load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 # diff --git a/target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch index b06d7947c..fa8dd44e8 100644 --- a/target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch +++ b/target/linux/adm5120/patches-2.6.35/007-adm5120_pci.patch @@ -10,7 +10,7 @@ obj-$(CONFIG_CPU_CAVIUM_OCTEON) += msi-octeon.o --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h -@@ -1752,6 +1752,9 @@ +@@ -1756,6 +1756,9 @@ #define PCI_VENDOR_ID_ESDGMBH 0x12fe #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 diff --git a/target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch index 0258fa4fb..fb65ef3f8 100644 --- a/target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch +++ b/target/linux/adm5120/patches-2.6.35/009-adm5120_leds_switch_trigger.patch @@ -1,8 +1,8 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -365,4 +365,12 @@ config LEDS_TRIGGER_NETDEV - This allows LEDs to be controlled by network device activity. - If unsure, say Y. +@@ -389,4 +389,12 @@ config LEDS_TRIGGER_USBDEV + This allows LEDs to be controlled by the presence/activity of + an USB device. If unsure, say N. +config LEDS_TRIGGER_ADM5120_SWITCH + tristate "LED ADM5120 Switch Port Status Trigger" @@ -15,8 +15,8 @@ endif # NEW_LEDS --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -48,3 +48,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o +@@ -51,3 +51,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o - obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o +obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o diff --git a/target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch index ec7505c58..31217c472 100644 --- a/target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch +++ b/target/linux/adm5120/patches-2.6.35/101-cfi_fixup_macronix_bootloc.patch @@ -1,8 +1,8 @@ --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -53,6 +53,12 @@ +@@ -49,6 +49,12 @@ + #define SST49LF008A 0x005a #define AT49BV6416 0x00d6 - #define MANUFACTURER_SAMSUNG 0x00ec +/* Macronix */ +#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */ @@ -13,9 +13,9 @@ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -283,6 +289,41 @@ static void fixup_s29gl032n_sectors(stru - } - } +@@ -329,6 +335,41 @@ static struct cfi_fixup cfi_nopri_fixup_ + { 0, 0, NULL, NULL } + }; +#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC +/* @@ -55,7 +55,7 @@ static struct cfi_fixup cfi_fixup_table[] = { { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, #ifdef AMD_BOOTLOC_BUG -@@ -319,6 +360,9 @@ static struct cfi_fixup fixup_table[] = +@@ -365,6 +406,9 @@ static struct cfi_fixup fixup_table[] = */ { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL }, { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL }, diff --git a/target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch index 1e5d23a23..626cd85f2 100644 --- a/target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch +++ b/target/linux/adm5120/patches-2.6.35/102-jedec_pmc_39lvxxx_chips.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c -@@ -133,6 +133,10 @@ +@@ -116,6 +116,10 @@ #define UPD29F064115 0x221C /* PMC */ @@ -11,7 +11,7 @@ #define PM49FL002 0x006D #define PM49FL004 0x006E #define PM49FL008 0x006A -@@ -1275,6 +1279,54 @@ static const struct amd_flash_info jedec +@@ -1273,6 +1277,54 @@ static const struct amd_flash_info jedec ERASEINFO(0x02000,2), ERASEINFO(0x04000,1), } diff --git a/target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch b/target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch index 69f103550..ec4f6c5a4 100644 --- a/target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch +++ b/target/linux/adm5120/patches-2.6.35/103-mtd_trxsplit.patch @@ -14,7 +14,7 @@ depends on MTD_PARTITIONS --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile -@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o mtdbdi. +@@ -8,6 +8,7 @@ mtd-y := mtdcore.o mtdsuper.o mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o diff --git a/target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch b/target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch index 5bb36432a..9b486a7f9 100644 --- a/target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch +++ b/target/linux/adm5120/patches-2.6.35/120-rb153_cf_driver.patch @@ -10,9 +10,9 @@ obj-$(CONFIG_PATA_ACPI) += pata_acpi.o --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig -@@ -604,6 +604,15 @@ config PATA_RADISYS - - If unsure, say N. +@@ -778,6 +778,15 @@ config PATA_QDI + help + Support for QDI 6500 and 6580 PATA controllers on VESA local bus. +config PATA_RB153_CF + tristate "RouterBOARD 153 Compact Flash support" diff --git a/target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch index 54c646869..ac3c51635 100644 --- a/target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch +++ b/target/linux/adm5120/patches-2.6.35/203-gpio_leds_brightness.patch @@ -1,6 +1,6 @@ --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c -@@ -45,13 +45,17 @@ static void gpio_led_set(struct led_clas +@@ -52,13 +52,17 @@ static void gpio_led_set(struct led_clas container_of(led_cdev, struct gpio_led_data, cdev); int level; diff --git a/target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch b/target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch index 0c4e8e623..bcc3230ac 100644 --- a/target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch +++ b/target/linux/adm5120/patches-2.6.35/310-adm5120_wdt.patch @@ -1,6 +1,6 @@ --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig -@@ -807,6 +807,18 @@ config RC32434_WDT +@@ -825,6 +825,18 @@ config RC32434_WDT To compile this driver as a module, choose M here: the module will be called rc32434_wdt. @@ -21,7 +21,7 @@ depends on SGI_HAS_INDYDOG --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile -@@ -113,6 +113,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt +@@ -114,6 +114,7 @@ obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o obj-$(CONFIG_AR7_WDT) += ar7_wdt.o obj-$(CONFIG_TXX9_WDT) += txx9wdt.o diff --git a/target/linux/adm5120/patches-2.6.36/001-adm5120.patch b/target/linux/adm5120/patches-2.6.36/001-adm5120.patch index 4f183c49e..b96307742 100644 --- a/target/linux/adm5120/patches-2.6.36/001-adm5120.patch +++ b/target/linux/adm5120/patches-2.6.36/001-adm5120.patch @@ -1,6 +1,6 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -25,6 +25,21 @@ choice +@@ -26,6 +26,21 @@ choice prompt "System type" default SGI_IP22 @@ -22,7 +22,7 @@ config MIPS_ALCHEMY bool "Alchemy processor based machines" select 64BIT_PHYS_ADDR -@@ -707,6 +722,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD +@@ -708,6 +723,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD endchoice diff --git a/target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch index d8443ed5f..fb5fb8312 100644 --- a/target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch +++ b/target/linux/adm5120/patches-2.6.36/003-adm5120_switch.patch @@ -1,6 +1,6 @@ --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig -@@ -491,6 +491,10 @@ config MIPS_AU1X00_ENET +@@ -614,6 +614,10 @@ config MIPS_AU1X00_ENET If you have an Alchemy Semi AU1X00 based system say Y. Otherwise, say N. @@ -13,7 +13,7 @@ depends on PCI && SGI_IP27 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile -@@ -212,6 +212,7 @@ obj-$(CONFIG_SC92031) += sc92031.o +@@ -213,6 +213,7 @@ obj-$(CONFIG_SC92031) += sc92031.o # This is also a 82596 and should probably be merged obj-$(CONFIG_LP486E) += lp486e.o diff --git a/target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch index a52dfac7a..f8e550d9f 100644 --- a/target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch +++ b/target/linux/adm5120/patches-2.6.36/009-adm5120_leds_switch_trigger.patch @@ -1,8 +1,8 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -391,4 +391,12 @@ config LEDS_TRIGGER_NETDEV - This allows LEDs to be controlled by network device activity. - If unsure, say Y. +@@ -398,4 +398,12 @@ config LEDS_TRIGGER_USBDEV + This allows LEDs to be controlled by the presence/activity of + an USB device. If unsure, say N. +config LEDS_TRIGGER_ADM5120_SWITCH + tristate "LED ADM5120 Switch Port Status Trigger" @@ -15,8 +15,8 @@ endif # NEW_LEDS --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -51,3 +51,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o +@@ -52,3 +52,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o - obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o +obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o diff --git a/target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch index 00148fa60..626cd85f2 100644 --- a/target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch +++ b/target/linux/adm5120/patches-2.6.36/102-jedec_pmc_39lvxxx_chips.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c -@@ -115,6 +115,10 @@ +@@ -116,6 +116,10 @@ #define UPD29F064115 0x221C /* PMC */ @@ -11,7 +11,7 @@ #define PM49FL002 0x006D #define PM49FL004 0x006E #define PM49FL008 0x006A -@@ -1259,6 +1263,54 @@ static const struct amd_flash_info jedec +@@ -1273,6 +1277,54 @@ static const struct amd_flash_info jedec ERASEINFO(0x02000,2), ERASEINFO(0x04000,1), } diff --git a/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch index b13d48f55..2f6eaf06e 100644 --- a/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch +++ b/target/linux/adm5120/patches-2.6.37/009-adm5120_leds_switch_trigger.patch @@ -1,8 +1,8 @@ --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig -@@ -400,4 +400,12 @@ config LEDS_TRIGGER_NETDEV - This allows LEDs to be controlled by network device activity. - If unsure, say Y. +@@ -322,4 +322,12 @@ config LEDS_TRIGGER_USBDEV + This allows LEDs to be controlled by the presence/activity of + an USB device. If unsure, say N. +config LEDS_TRIGGER_ADM5120_SWITCH + tristate "LED ADM5120 Switch Port Status Trigger" @@ -15,8 +15,8 @@ endif # NEW_LEDS --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile -@@ -52,3 +52,4 @@ obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledt - obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o +@@ -43,3 +43,4 @@ obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += obj-$(CONFIG_LEDS_TRIGGER_MORSE) += ledtrig-morse.o - obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o + obj-$(CONFIG_LEDS_TRIGGER_USBDEV) += ledtrig-usbdev.o +obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o |