[s3c24xx] Get rid of glamo-lcm-spi. It's not used and probably never will be.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16871 3c298f89-4303-0410-b956-a3cf2f4a3e73

3 files changed, 0 insertions, 250 deletions

diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
index c27c13089..2ae335a19 100644
--- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Kconfig
@@ -41,14 +41,6 @@ config MFD_GLAMO_SPI_GPIO
 	help
           Enable a bitbanging SPI adapter driver for the Smedia Glamo.
 
-config MFD_GLAMO_SPI_FB
-	tristate "Glamo LCM control channel SPI support"
-	depends on MFD_GLAMO_FB
-	help
-	  Enable a bitbanging SPI adapter driver for the Smedia Glamo LCM
-	  control channel.  This SPI interface is frequently used to
-	  interconnect the LCM control interface.
-
 config MFD_GLAMO_MCI
 	tristate "Glamo S3C SD/MMC Card Interface support"
 	depends on MFD_GLAMO && MMC
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile
index dc64d50fa..99a927a5b 100644
--- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile
+++ b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/Makefile
@@ -7,6 +7,5 @@ obj-$(CONFIG_MFD_GLAMO_SPI)		+= glamo-spi.o
 obj-$(CONFIG_MFD_GLAMO_SPI_GPIO) 	+= glamo-spi-gpio.o
 
 obj-$(CONFIG_MFD_GLAMO_FB)		+= glamo-fb.o
-obj-$(CONFIG_MFD_GLAMO_SPI_FB)		+= glamo-lcm-spi.o
 obj-$(CONFIG_MFD_GLAMO_MCI)		+= glamo-mci.o
 
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c
deleted file mode 100644
index 45d12fce6..000000000
--- a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-lcm-spi.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright (C) 2007 Openmoko, Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- *
- * Smedia Glamo GPIO based SPI driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver currently only implements a minimum subset of the hardware
- * features, esp. those features that are required to drive the jbt6k74
- * LCM controller asic in the TD028TTEC1 LCM.
- *
-*/
-
-#define DEBUG
-#if 0
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <linux/spi/glamo.h>
-
-#include <linux/glamofb.h>
-
-#include <mach/hardware.h>
-
-#include "glamo-core.h"
-#include "glamo-regs.h"
-
-struct glamo_spi {
-	struct spi_bitbang	bitbang;
-	struct spi_master	*master;
-	struct glamo_spi_info	*info;
-	struct device		*dev;
-};
-
-static inline struct glamo_spi *to_gs(struct spi_device *spi)
-{
-	return spi->controller_data;
-}
-
-static int glamo_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
-{
-	unsigned int bpw;
-
-	bpw = t ? t->bits_per_word : spi->bits_per_word;
-
-	if (bpw != 9 && bpw != 8) {
-		dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void glamo_spi_chipsel(struct spi_device *spi, int value)
-{
-#if 0
-	struct glamo_spi *gs = to_gs(spi);
-
-	dev_dbg(&spi->dev, "chipsel %d: spi=%p, gs=%p, info=%p, handle=%p\n",
-		value, spi, gs, gs->info, gs->info->glamofb_handle);
-
-	glamofb_cmd_mode(gs->info->glamofb_handle, value);
-#endif
-}
-
-static int glamo_spi_txrx(struct spi_device *spi, struct spi_transfer *t)
-{
-	struct glamo_spi *gs = to_gs(spi);
-	const u_int16_t *ui16 = (const u_int16_t *) t->tx_buf;
-	u_int16_t nine_bits;
-	int i;
-
-	dev_dbg(&spi->dev, "txrx: tx %p, rx %p, bpw %d, len %d\n",
-		t->tx_buf, t->rx_buf, t->bits_per_word, t->len);
-
-	if (spi->bits_per_word == 9)
-		nine_bits = (1 << 9);
-	else
-		nine_bits = 0;
-
-	if (t->len > 3 * sizeof(u_int16_t)) {
-		dev_err(&spi->dev, "this driver doesn't support "
-			"%u sized xfers\n", t->len);
-		return -EINVAL;
-	}
-
-	for (i = 0; i < t->len/sizeof(u_int16_t); i++) {
-		/* actually transfer the data */
-#if 1
-		glamofb_cmd_write(gs->info->glamofb_handle,
-				  GLAMO_LCD_CMD_TYPE_SERIAL | nine_bits |
-				  (1 << 10) | (1 << 11) | (ui16[i] & 0x1ff));
-#endif
-		/* FIXME: fire ?!? */
-		if (i == 0 && (ui16[i] & 0x1ff) == 0x29) {
-			dev_dbg(&spi->dev, "leaving command mode\n");
-			glamofb_cmd_mode(gs->info->glamofb_handle, 0);
-		}
-	}
-
-	return t->len;
-}
-
-static int glamo_spi_setup(struct spi_device *spi)
-{
-	int ret;
-
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 9;
-
-	/* FIXME: hardware can do this */
-	if (spi->mode & SPI_LSB_FIRST)
-		return -EINVAL;
-
-	ret = glamo_spi_setupxfer(spi, NULL);
-	if (ret < 0) {
-		dev_err(&spi->dev, "setupxfer returned %d\n", ret);
-		return ret;
-	}
-
-	dev_dbg(&spi->dev, "%s: mode %d, %u bpw\n",
-		__FUNCTION__, spi->mode, spi->bits_per_word);
-
-	return 0;
-}
-
-static int glamo_spi_probe(struct platform_device *pdev)
-{
-	struct spi_master *master;
-	struct glamo_spi *sp;
-	int ret;
-	int i;
-
-	master = spi_alloc_master(&pdev->dev, sizeof(struct glamo_spi));
-	if (master == NULL) {
-		dev_err(&pdev->dev, "failed to allocate spi master\n");
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	sp = spi_master_get_devdata(master);
-	memset(sp, 0, sizeof(struct glamo_spi));
-
-	sp->master = spi_master_get(master);
-	sp->info = pdev->dev.platform_data;
-	if (!sp->info) {
-		dev_err(&pdev->dev, "can't operate without platform data\n");
-		ret = -EIO;
-		goto err_no_pdev;
-	}
-	dev_dbg(&pdev->dev, "sp->info(pdata) = %p\n", sp->info);
-
-	sp->dev = &pdev->dev;
-
-	platform_set_drvdata(pdev, sp);
-
-	sp->bitbang.master = sp->master;
-	sp->bitbang.setup_transfer = glamo_spi_setupxfer;
-	sp->bitbang.chipselect = glamo_spi_chipsel;
-	sp->bitbang.txrx_bufs = glamo_spi_txrx;
-	sp->bitbang.master->setup = glamo_spi_setup;
-
-	ret = spi_bitbang_start(&sp->bitbang);
-	if (ret)
-		goto err_no_bitbang;
-
-	/* register the chips to go with the board */
-
-	glamofb_cmd_mode(sp->info->glamofb_handle, 1);
-
-	for (i = 0; i < sp->info->board_size; i++) {
-		dev_info(&pdev->dev, "registering %p: %s\n",
-			 &sp->info->board_info[i],
-			 sp->info->board_info[i].modalias);
-
-		sp->info->board_info[i].controller_data = sp;
-		spi_new_device(master, sp->info->board_info + i);
-	}
-
-	return 0;
-
-err_no_bitbang:
-	platform_set_drvdata(pdev, NULL);
-err_no_pdev:
-	spi_master_put(sp->bitbang.master);
-err:
-	return ret;
-
-}
-
-static int glamo_spi_remove(struct platform_device *pdev)
-{
-	struct glamo_spi *sp = platform_get_drvdata(pdev);
-
-	spi_bitbang_stop(&sp->bitbang);
-	spi_master_put(sp->bitbang.master);
-
-	return 0;
-}
-
-#define glamo_spi_suspend NULL
-#define glamo_spi_resume NULL
-
-static struct platform_driver glamo_spi_drv = {
-	.probe		= glamo_spi_probe,
-	.remove		= glamo_spi_remove,
-	.suspend	= glamo_spi_suspend,
-	.resume		= glamo_spi_resume,
-	.driver		= {
-		.name	= "glamo-lcm-spi",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init glamo_spi_init(void)
-{
-	return platform_driver_register(&glamo_spi_drv);
-}
-
-static void __exit glamo_spi_exit(void)
-{
-	platform_driver_unregister(&glamo_spi_drv);
-}
-
-module_init(glamo_spi_init);
-module_exit(glamo_spi_exit);
-
-MODULE_DESCRIPTION("Smedia Glamo 336x/337x LCM serial command SPI Driver");
-MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>")
-MODULE_LICENSE("GPL");
-#endif